Total Hardness Test set for easy determination of German water hardness ° dH. Accurate measurement with simple titration method. If the indicator solution drips in 5 ml of your test water until it changes color, the water hardness ° dH can be determined very simply and exactly. Applicable for checking the function of hardening plants or decalcifying plants. Naturally also for softening cartridges or all other areas of application for which you want to quickly and easily determine the water hardness down to one degree of accuracy. Prior knowledge by the user is not required. Have fun with determining your water hardness!

The parts of this maintenance set, which is suitable for all soft water systems of the SYR LEX Plus 10 series, should be replaced every 24 months during maintenance. It contains the following, original, components: • Seal set • Chlorine cell

The intelligent automatic system of the SYR LEX Plus 10 Connect S ensures that saving salt does not waste a bit of salt and regeneration only takes place when it is needed. The entire system is automatically disinfected each time. For more convenient maintenance or longer periods of absence (such as holidays), the water softener can be easily bridged if necessary without interruption. The plant is optimally suitable for single-family homes up to 6 persons. With the system, a single-family household can save a few hundred euros a year. You will save cleaning agents, detergents, shower gel, hair shampoo, decalcifier for household appliances and, of course, maintenance costs for electrical appliances and installations in your household. Lime settles in pipes or household appliances, as stubborn limestone. This can lead over time to constrictions of the water pipes, to blown heating coils of washing machines and dishwashers, defective water heaters or leaking boilers. Of course, there is no need for hours of cleaning of calcified shower walls, shower cubicles, bathtubs, toilets and sinks. Outstanding is the operating concept of the system with a colored, self-explanatory touch display. The highlight, however, is the control of the system with the SYR Connect APP (available free in the APP Store and on Google Play) which receives updates again and again. So you always know what is going on with your system and can also control your water consumption through the system. Your water feels noticeably softer. Coffee, tea and your food simply taste better by enhancing the water! The advantages of the SYR LEX Plus 10 Connect S:     DVGW certified *, complies with all directives     very low environmentally friendly salt consumption per regeneration     Installation with torsion-free flexible hoses in the plug-in system     Consumption-dependent, water-saving regeneration     Large softening column     automatic disinfection     small space requirement due to compact design     easiest operation by colored Touchdsiplay     Control and operation via SYR Connect APP     Illuminated salt container for easy, quick visual inspection     high throughput     Single column system (saves money and is robust)     Made in Germany     protects against problems with lime in the lines and devices     saves energy     automatic control Components and design The functional parts of the system are made of the highest quality plastic. The housing parts are made of impact-resistant thermoplastic, the rubber parts of age-resistant, durable elastomers. All other functional parts use low-lead, dezincification-resistant brass alloy and stainless steel. The materials used comply with the recognized rules of technology. The plastic parts and elastomers touched by the water comply with the KTW guideline issued by the Federal Environmental Agency. Installation A bypass and blending valve is already included in the delivery. If you already have a drinking water filter from the system DRUFI at the house connection, the connection is extremely easy. There must then be no installation work on the water-bearing system! The decalcification system is then simply screwed into the sandwich (see Figure 2) - DONE! The result is two fittings, a compact filter and softening unit. And that's how easy it is Disconnect the DRUFI, flange the connection fitting with integrated blending device, refit the DRUFI and connect the two hoses of the LEX Plus 10 Connect, no additional flange is required. Installation place The water softening system is installed centrally behind the water meter system. In order to avoid malfunctions, the water softening system is effectively protected by the connection of a drinking water filter (System Drufi). From a pressure of 5 bar, a pressure reducer must be connected in advance. The water to be softened must be clear, free of solid impurities and free of iron and manganese (TWVO values). Maintenance Since the water softener works automatically, you only have to refill salt regularly. In accordance with DIN EN 806, Part 5, maintenance must be carried out at least once a year. A maintenance contract by the specialized trade permanently establishes the safe operation function. We will gladly give you more information in a consultation. Some tips from our side: Please clean the salt container of incrustations at regular intervals and use only high quality salt. According to the Drinking Water Ordinance, regeneration salt in Germany must comply with the purity requirements of: DIN EN 973 Table 1 / Type A / Table 3. These are the most frequent causes of faults in water softening systems and are easy to avoid. This will prevent unnecessary, not insignificant costs that may arise through an installer or the factory customer service! Paid installation service by factory customer service or specialized specialist company: For the area of ??Central Germany we can arrange for a specialized company, where you usually get an appointment within 2-4 weeks. The costs are performance-related and are negotiated directly with the executing specialist. Details on the installation situation will be clarified in advance. We receive no commission for the mediation! Alternatively and optionally, the Werkskundienst undertakes this work. We are happy to make the contact. Please contact us if this service is interesting for you. Warranty and guarantee In compliance with the DIN EN 806, Part 5 and the installation by a Santärfachbetrieb the warranty and warranty on the system is 24 months. If you conclude a maintenance contract, the warranty may be extended to up to 5 years (as the manufacturer is a member of zvshk and is listed there as a handyman brand). You will find more about this on page 21 of the manual in the download area (see below). Scope of delivery 1x cabinet with salt container, 1x blending valve with flange connection incl. closing flap, 4x screws M6 x 70, 4x safety clamps for connection hoses, 2x connection hoses (length 700mm), 1x rinsing water hose 2m (12x16mm), 3x hose clamp, 1x tension clamp, 1x power plug, 1x drain funnel, 1x hardness measuring set Note: The item we delivered to avoid transport damage by freight carrier. * The DVGW - German association of gas and water specialist - stands for the technical self-administration in the gas and water sector. Its technical regulations are the basis for safety and reliability in the German gas and water supply. A DVGW certification is the reliable proof of compliance with the recognized rules of technology. The softening system Delfin has been certified DVGW. This certificate does not have a lot of equipment, and the dolphin is even licensed for rental or commercial use.

The SYR Drufi + DFR is a combination of fittings, specially developed for house entrance installation in accordance with DIN 1988, consisting of a semi-automatic backwash filter in accordance with DIN EN 13443-1 and a pressure reducer in accordance with DIN EN 1567. The Drufi + DFR combines the latest technology and the highest quality workmanship. Connected to a DN 50 drainage pipe, the integrated funnel directs the backwash water into the sewage system. Since the Drufi + DFR is equipped with a display ring for maintenance reminders according to DIN 1988, you always have the next backwash in view. In the case of the Drufi + DFR valve combination, the correct installation sequence according to DIN 1988 is observed. The Drufi flange program is used for installation in the pipeline. The flanges can be installed in vertical and horizontal lines. The built-in pressure reducer enables individual pressure setting and completes the excellent properties in the smallest of spaces. The Drufi + DFR consists of a mechanically acting, semi-automatic backwash filter. In addition, it is equipped with a flange seal, hexagon socket screws for flange mounting and an assembly key for the hexagon socket screws. The pressure reducer insert is set at the factory to 4 bar output pressure, whereby the external adjustment handle allows an individual pressure setting between 1.5 and 6 bar. An outlet pressure manometer is also part of the equipment of the Drufi + DFR. The filter cup is made of high quality plastic. The housing and the internal plastic parts are made of impact-resistant thermoplastic, the rubber parts are made of age-resistant elastomers. A low-lead, dezincification-resistant gunmetal alloy or stainless steel is used for all other functional parts. The ring seals used are made of asbestos-free fibers. All materials correspond to the recognized rules of technology. The plastic parts and elastomers that come into contact with water correspond to the KTW guideline of the Federal Environment Agency. The advantages at a glance • prevents pitting and corrosion • high flow rate • Backwash system with strong effectiveness • Control elements marked yellow • Practical slide ring for maintenance reminders • UV protection against germs • Reminder function for backwashing through maintenance display • Accessories: RSA automatic backwashing system, can be retrofitted without tools • DVGW-tested security Our recommendation Be sure to order the SYR connection flange DN 20 to 32 if you do not already have it.

The assembly block is suitable for the AquaAvanti IronGo iron filter and manganese filter AquaAvanti ManganGo or where a bypass is needed. If there is limited space at the point of connection, the use of a mounting block is ideal. For safety reasons, it may be desirable to be able to bridge the device unit. For such cases, the mounting block (bypass) is ideal. The installation of a mounting block usually takes about one hour. Your installer will surely make you an offer. If you are not sure if you need a mounting block just ask him. The mounting block is working that way Position 1 When the two outer taps are closed and the middle tap is open, the water flows past the connected device (eg AquaAvanti Iron GO or AquaAvanti ManganGo). Position 2 If the two outer cocks are open and the middle closed, all the water flows through the connected devices. Note: If it is necessary to bridge the units, simply return the mounting block to position 1.

Universal flange DN 25 from SYR If you do not yet have a suitable flange for the system, you will need this component to connect your SYR LEX PLUS 10 Connect soft water system. This flange is suitable for DRUFI +, IT 3000, IT 4000, LEX Connect individual softening systems 10 to 30, Safe-T and Safe-T Connect as well as other SYR articles. The housing is made of pressed brass and has screw connections on both sides. The installation position can be designed as desired. It is best to order the flange at the same time when you decide on a water softener from SYR.

The intelligent automatic system of the SYR LEX Plus 10 SL Connect ensures that no salt is wasted through economy salting and regeneration only takes place when it is necessary. The entire system is automatically disinfected each time. The highlight of the model variant SL is the fully integrated leakage protection, which can protect you from the consequences of expensive water damage. The leakage protection and the SYR soft water system interact with each other. If your LEX Plus 10 SL Connect requires water for regeneration, it is reported to the leak protection system, which then releases the appropriate amount of water. For non-integrated solutions, this could potentially trigger a leak alarm. Not so with the SYR system, so you do not have to do anything during the rain! For more convenient maintenance or longer periods of absence (eg holidays), the water softener can be bypassed without interruption, if necessary. The plant is optimally suitable for single-family homes up to 6 persons. With the system, a single-family household can save a few hundred euros a year. You save detergents, detergents, shower gel, hair shampoo, decalcifier for household appliances and additional maintenance costs for electrical appliances and installations in your household. Lime settles in pipes or household appliances, as stubborn limestone. This can lead over time to constrictions of the water pipes, to blown heating coils of washing machines and dishwashers, defective water heaters or leaking boilers. In addition, there is no need for hours of cleaning of calcified shower walls, shower cubicles, bathtubs, toilets and sinks. Outstanding is the operating concept of the system with a colored, self-explanatory touch display. The highlight, however, is the digital control option of the system with the SYR Connect APP (available free of charge in the APP Store and on Google Play), which receives frequent updates. So you always know what's going on with your system and can also control your water consumption through the system. Your water feels noticeably softer. Coffee, tea and food taste better by softening the water! The advantages of the SYR LEX Plus 10 SL Connect:     DVGW certified *     Leakage protection fully integrated     License for rental and commercial use     very low environmentally friendly salt consumption per regeneration     Installation with torsion-free flexible hoses in the plug-in system     Consumption-dependent, water-saving regeneration     big softening column     automatic disinfection     small space requirement due to compact design     easiest operation by colored Touchdsiplay     Control and operation via SYR Connect APP     illuminated salt container for easy, quick visual inspection     high throughput     cost-minimizing, robust single column system     Made in Germany     nationwide customer service or maintenance by a trained specialist     protects against Kalkinfarkt of lines and devices     saves energy     automatic control   Components and design The functional parts of the system are made of the highest quality plastic. The housing parts are made of impact-resistant thermoplastic, the rubber parts of age-resistant, durable elastomers. All other functional parts use a low-lead, dezincification-resistant brass alloy and stainless steel. The materials used comply with the recognized rules of technology. The plastic parts and elastomers touched by the water comply with the KTW guideline issued by the Federal Environmental Agency. Installation A bypass and blending valve is already included in the delivery. If you already have a drinking water filter from the system DRUFI at the house connection, the connection is extremely easy. There must then be no installation work on the water-bearing system! The decalcification system is then simply screwed into the sandwich (see Figure 2) - DONE! The result is two fittings, a compact filter and softening unit. And that's how easy it is Disconnect the DRUFI, flange the connection fitting with integrated trimming device, refit the DRUFI and connect the two hoses of the LEX Plus 10 SL Connect, no additional flange is required. Installation place The water softening system is installed centrally behind the water meter system. In order to avoid malfunctions, the water softening system is effectively protected by the connection of a drinking water filter (System Drufi). From a pressure of 5 bar, a pressure reducer must be connected in advance. The water to be softened must be clear, free of solid impurities and free of iron and manganese (TWVO values). Installation, Maintenance & Commissioning Since the water softener works automatically, you only have to refill salt regularly. In accordance with DIN EN 806, Part 5, maintenance must be carried out at least once a year. A maintenance contract by the specialized trade permanently produces the safe operation function. We would like to explain more about this in a consultation. Some tips from our side: Please clean the salt container of incrustations at regular intervals and use only high quality salt. According to the Drinking Water Ordinance, regeneration salt in Germany must comply with the purity requirements of: DIN EN 973 Table 1 / Type A / Table 3. These are the most frequent causes of faults in water softening systems and are easy to avoid. This will prevent unnecessary, not insignificant costs that may arise through an installer or the factory customer service! Paid installation service by a specialized specialist: For the area of ??Central Germany, we can arrange a specialized company, where you usually get an appointment within 2-4 weeks. The costs are performance-related and are negotiated directly with the executing specialist. Details on the installation situation will be clarified in advance. We receive no commission for the mediation! Alternatively and optionally, the Werkskundienst undertakes this work. We are happy to make the contact. Please contact us if this service is interesting for you. Warranty and guarantee In compliance with the DIN EN 806, Part 5 and the installation by a sanitary specialist company, the guarantee and warranty on the system is 24 months. If you conclude a maintenance contract, the warranty may be extended to up to 5 years (as the manufacturer is a member of zvshk and is listed there as a handyman brand). You will find more about this on page 21 of the manual in the download area (see below). Scope of delivery 1x cabinet with salt container, 1x blending valve with flange connection incl. closing flap, 4x screws M6 x 70, 4x safety clamps for connection hoses, 2x connection hoses (length 700mm), 1x rinsing water hose 2m (12x16mm), 3x hose clamp, 1x tension clamp, 1x power plug, 1x drain funnel, 1x hardness measuring set Note: The item we delivered to avoid transport damage by freight carrier. * The DVGW - German association of gas and water specialist - stands for the technical self-administration in the gas and water sector. Its technical regulations are the basis for safety and reliability in the German gas and water supply. A DVGW certification is the reliable proof of compliance with the recognized rules of technology. The SYR LEX Plus 10 SL Connect water softener has been DVGW certified. This certificate does not have many devices, and the SYR LEX Plus 10 SL Connect is even licensed for rental or professional use.

Very high quality armored hose as 1 inch version with 1 x union nut (ÜM) and 1 x union nut (ÜM). The polyethylene (PE) hose has a flat seal and is DIN-DVGW tested. The connections are nickel-plated brass. The armored hose is of course suitable for drinking water installations and also for sanitary and water softening systems. The hose material is very flexible and has a high thermal resistance. The high-quality, flexible hose was produced with a drinking water approval (KTW A, W270, W543, DVGW) and is resistant to electrical corrosion. In addition, it has a vacuum resistance of up to 0.1 mbar, even with the smallest bending gradients and temperatures of up to + 80 ° C.

The WatPass® Resin Refresh concentrate reliably removes impurities of the resin of your soft water plant that could not be removed during regeneration. We recommend using the Resin Refresh cleaner every 12 months to ensure the function of your system and to remove stubborn impurities of the ion exchanger. Usage Simply add 10 ml of the concentrate per liter of softening resin to the brine shaft. (Example: For 10 liters of ion exchanger, use 100 ml of concentrate.)  

The set is tool-free and very easy to use during routine maintenance. We recommend to do this every 24 months. It fits all Clack WS 1 CI control heads no matter where they are used.   Scope of delivery: Main piston seal cage, main piston & bowl

Effective leakage protection with smart internet app. Syr Safe Tech+ Connect leakage protection protects against leaks, minimizes water damage and prevents water waste. It monitors water consumption with state-of-the-art electronics. If the individual consumption values are exceeded, the Syr Safe Tech+ Connect leak protection shuts off the pipe system and sends an email or notifies them via SYR APP. With the free SYR App, the Syr Safe Tech Plus Connect can be viewed and controlled via smartphone/tablet. Why should I install such a system? Over 3,000 tap water damages occur in Germany - every day! The intelligent, internet-enabled Syr Safe Tech+ Connect leak protection offers reliable protection against the expensive consequences of water damage. This is how safe leakage protection works with the Syr Safe Tech Plus Connect leakage protection. The "SYR Syr Safe Tech Plus Connect Leak Protection" uses state-of-the-art electronics to monitor the current water consumption every second and compares the measured values with a setpoint. If the individual consumption values are exceeded, it immediately shuts off the pipe system. If the Syr Safe Tech Plus Connect leak protection is online, it notifies you by e-mail. In places where monitoring is particularly intensive, the SafeFloor Connect wireless floor sensor can also be used and linked to the system. This further increases safety many times over. Convenient features for operation and perfect control - the SYR App Once a project has been created on the SYR Connect server, the user has a full overview of the installation and access to important parameters. Via smartphone, tablet or PC, he can set leakage protection levels, operate presence or absence functions, manage the absence calendar and control linked SafeFloor Connect wireless floor sensors. Perfectly combinable The Syr Safe Tech+ Connect leak protection is installed on the SYR universal flange. It is therefore quite practical if the SYR DRUFI drinking water filter is already present: the Syr Safe Tech Plus Connect leak protection can then - without having to change the installation - simply be retrofitted. The advantages at a glance  integrated WLAN & LAN  intelligent self-learning phase  Control and monitoring via SYR App possible  push notifications/emails in online mode  vacation monitoring and special absence function  perfect combination with the SYR DRUFI: the SafeTech+ Connect fits between DRUFI and flange  can communicate with one or more SafeFloor Connect floor sensors  emergency stop function  in case of power failure emergency operation by battery  determines the hardness range of the water (conductivity), measures water pressure and water temperature  several user profiles adjustable Scope of delivery Electronic unit, battery 9V, emergency open key, power adapter, commissioning manual, operation and maintenance manual Important: SYR connection flange must be ordered if not available, because it is not included in the delivery! Ask your insurance company, it can be worthwhile Many well-known insurers discount their premiums if a leakage protection is installed. Just ask and save additional money.  

The new NeoSoft Connect 2500 soft water system from SYR with patented single-hose system and touchscreen. The system is ideal for detached houses with up to 3 residential units (up to approx. 6 people). Automatic adjustment of the operating mode The innovative and intelligent automatic adjustment of the operating mode is a real highlight. The integrated turbine of the NeoSoft water softener continuously measures the water consumption so that the intelligent system can always optimally adapt the operating mode to the water consumption. Whether ECO, STANDARD or POWER - the currently active mode is displayed on the system using LED colour coding.  Large salt tank with soft-close lid Filling the salt tank, which now holds 40 kg, is extremely convenient thanks to the new soft-close lid. This is a considerable improvement compared to the SYR Lex Plus 10 models. The salt level indicator informs you when it needs to be topped up. Leakage warning system The self-learning, integrated SYR leakage warning system is a real innovation. The system notifies you via push messages on your smartphone if a leak is detected in your domestic water installation. Of course, this requires the system to be connected to your smartphone. Modern communication If the NeoSoft Connect is connected to the internet via WLAN or LAN, it can be controlled via the SYR app. Registered users also receive push notifications when salt needs to be topped up, for example. If the raw water hardness changes, the NeoSoft Connect issues a warning.  Statistics such as water consumption, a logbook, maintenance settings and performance - the NeoSoft Connect can be operated via touchscreen and in online mode with the SYR app via tablet and smartphone and guides you through every process with clear displays. For convenient maintenance or longer periods of absence (e.g. holidays), the water softener can be bypassed without interruption if required. Simple installation The NeoSoft Connect offers everything for a time-saving and safe connection, as the flush and overflow hoses are already permanently connected to the system. The sandwich connection flange is placed on the SYR universal flange. The flexible, patented hose connection is fitted using a torsion-proof plug-in system. Then connect the rinsing and overflow hoses to the drain funnel included in the scope of delivery and fill with regenerating salt. The installation checklist shows whether the installation has been completed. Save money and resources The system offers a potential saving of several hundred euros per year for a single-family household. You save on cleaning agents, detergents, shower gel, hair shampoo, descaling agents for household appliances and additional maintenance costs for electrical appliances and installations in your household. Limescale builds up in pipes or household appliances as stubborn limescale. Over time, this can lead to constricted water pipes, burnt-out heating coils in washing machines and dishwashers, defective instantaneous water heaters or leaking boilers. In addition, there is no need to spend hours cleaning calcified shower walls, shower cubicles, bathtubs, toilets and sinks. Water quality Your water feels noticeably softer. Coffee, tea and food simply taste better when the water is softened! The advantages of the SYR Neosoft Connect 2500 very low environmentally friendly salt consumption per regeneration Installation with patented single-hose system. The system is supplied pre-assembled and ready for connection. The hose is torsion-free thanks to the innovative connector system. Consumption-dependent, water-saving regeneration Automatic disinfection Self-learning leak alert system Low space requirement due to compact design Easy operation thanks to colour 4.2" touchscreen Control and operation via SYR Connect APP Illuminated salt container for simple, quick visual inspection Sandwich flange for connecting the TRIO DFR/LS, DRUFI+ and SafeTech+ Connect High throughput capacity Made in Germany Nationwide customer service or maintenance by a trained specialist company protects pipes and appliances from limescale infarction saves energy automatic control Components and design The functional parts of the system are made of the highest quality plastic. The housing parts are made of impact-resistant thermoplastic, the rubber parts of age-resistant, hard-wearing elastomers. A low-lead, dezincification-resistant brass alloy and stainless steel are used for all other functional parts. The materials used comply with the recognised rules of technology. The plastic parts and elastomers that come into contact with water comply with the KTW guidelines of the German Federal Environment Agency. Installation If you already have a drinking water filter from the DRUFI system on the house connection, the connection is extremely simple. No installation work needs to be carried out on the water-bearing system! The descaling system is then simply screwed into the sandwich - DONE! A compact filter and softening unit or leakage protection unit is created from two fittings. And it's as simple as this Unscrew the DRUFI, flange on the connection fitting with integrated blending device, refit the DRUFI and connect the two hoses of the SYR Neosoft Connect 5000; an additional flange is not required. Installation location The water softener is installed centrally behind the water meter. To prevent malfunctions, the water softener is effectively protected by connecting a drinking water filter (Drufi system) upstream. From a pressure of 5 bar, a pressure reducer must be connected upstream. The water to be softened must be clear, free of solid impurities and free of iron and manganese (values within the scope of the German law). Maintenance As the water softener works automatically, salt only needs to be topped up regularly. According to DIN EN 806, Part 5, maintenance must be carried out at least once a year, and every six months for shared systems. A maintenance contract with a specialist installer ensures that the system continues to function reliably. We will be happy to explain more about this in a consultation. A few tips from us: Please clean the salt container at regular intervals to remove incrustations and only use high-quality salt. According to the Drinking Water Ordinance, regenerating salt in Germany must fulfil the purity requirements of: DIN EN 973 Table 1/Type A/Table 3. These are the most common causes of faults in water softening systems and are easy to avoid. This will prevent unnecessary, not inconsiderable costs that can be incurred by an installer or the customer service centre! Maintenance and commissioning by the customer service centre If required, you can have the recommended maintenance carried out by SYR's customer service. In the download area you will find a request form which you can use to contact SYR directly. We do not receive any commission for the referral. You therefore only have direct contact with the manufacturer. This service is not a matter of course in the industry and we are pleased to be able to offer you this service! Warranty and guarantee If DIN EN 806, Part 5 is observed and the system is installed by a specialised plumbing company, the guarantee and warranty for the system is 24 months. Scope of delivery 1x NeoSoft 2500 Connect soft water system, 1x hardness measuring set, 1x sandwich flange, patented armoured hose, 1x drain funnel with adapter for filter, mains adapter, adapter and hose nozzle for use with Drufi, NeoDos connection set for Neosoft, quick start guide   Note: The item is delivered by a forwarding agent to avoid transport damage.

The SafeFloor Connect wireless floor sensor is used in critical and / or particularly monitoring-intensive areas. The SafeFloor Connect has integrated wifi. If the smart sensor registers water on the floor, too low room temperature or too high humidity level, it warns with a flashing LED and a warning tone and reports this to your smartphone or tablet. Several SafeFloor Connect sensors can be combined. Use the Safe-Tech Connect leak protection to manage the sensors. If one of the SafeFloor Connect sensors hits, it transmits the data and the SafeTech Connect leak protection closes the drinking water line. Installation: Just put SafeFloor Connect on the Floor at a place of your choice. Technische Daten: Standard wireless protocoll: WiFi 2,4 Ghz WPA / WPA2 geschützt Batterien: 2 x 1,5 V Mignon (LR6) Schutzklasse: IPX4 Serial number: 2422.00.000

Universal flange DN 25 for pressing SYR If you do not yet have a suitable flange for the system, you will need this component to connect your SYR LEX PLus 10 Connect soft water system. This flange is suitable for DRUFI +, IT 3000, IT 4000, LEX Connect individual softening systems 10 to 30, Safe-T and Safe-T Connect as well as other SYR articles. The housing is made of gunmetal and has press connections on both sides (Viega press system for use in copper and stainless steel pipe installations). The installation position can be designed as desired. It is best to order the flange at the same time when you decide on a water softener from SYR.

The SYR LEX Plus 10 Connect is intended as a "stand alone" solution for those who do not intend to sandwich a DRUFI DFR house entrance filter in front of the system. It is not suitable for installation between the universal flange and the Drufi + DFR, but in contrast to the Connect S version, it has a nicely covered blending valve with the same function. The intelligent automatic system of the SYR LEX Plus 10 Connect ensures that no salt is wasted due to the low salting and that regeneration only takes place when it is necessary. The entire system is automatically disinfected every time. For more convenient maintenance or longer periods of absence (e.g. vacation), the water softener can be bridged without interruption if necessary. The system is ideal for single-family houses up to 6 people. With the system, there is a potential savings of several hundred euros per year for a single family household. You save cleaning agents, detergents, shower gel, hair shampoo, descaler for household appliances and additional maintenance costs for electrical devices and installations in your household. Lime builds up in pipes or household appliances as stubborn limestone. Over time, this can lead to constrictions in the water pipes, burned-out heating coils in washing machines and dishwashers, defective instantaneous water heaters or leaking boilers. In addition, there is no need to spend hours cleaning calcified shower walls, shower cubicles, bathtubs, toilets and sinks. The operating concept of the system with its colored, self-explanatory touch display is outstanding. The highlight, however, is the digital control option of the system with the SYR Connect APP (available free of charge in the APP Store and on Google Play), which receives updates again and again. So you always know what's going on with your system and can also control your water consumption via the system. Your water feels noticeably softer. Coffee, tea and food simply taste better because the water is softened! The advantages of the SYR LEX Plus 10 Connect • DVGW certified * • Approval for rental and commercial use • Very low environmentally friendly salt consumption per regeneration • Installation with torsion-free flexible reinforced hoses in the plug-in system • Consumption-dependent, water-saving regeneration • large softening column • automatic disinfection • Small space requirement due to compact design • Easiest operation thanks to colored touch screen display • Control and operation via SYR Connect APP • Illuminated salt container for easy, quick visual inspection • high throughput • Cost-minimizing, robust single-column system • Made in Germany • Nationwide factory customer service or maintenance by trained specialist company • protects against calcium infarction in pipes and devices • saves energy • automatic control Components and execution The functional parts of the system are made of the highest quality plastic. The housing parts are made of impact-resistant thermoplastic, the rubber parts are made of age-resistant, hard-wearing elastomers. A low-lead, dezincification-resistant brass alloy and stainless steel are used for all other functional parts. The materials used correspond to the recognized rules of technology. The plastic parts and elastomers that come into contact with water correspond to the KTW guideline of the Federal Environment Agency. Installation Installation is carried out by your installer. Commissioning is designed to be extremely simple. A bypass and blending valve, as well as hoses and an overall hardness test set are included in the scope of delivery. Installation location The softening system is installed centrally behind the water meter system. In order to avoid malfunctions, the water softener is effectively protected by connecting a drinking water filter (e.g. Drufi system). A pressure reducer must be connected upstream from a pressure of 5 bar. The water to be softened must be clear, free of solid impurities and free of iron and manganese (values ??within the scope of the TWVO). Installation, maintenance & commissioning Since the water softener works automatically, salt only needs to be topped up regularly. According to DIN EN 806, Part 5, maintenance must be carried out at least once a year, and maintenance for communal systems every six months. A maintenance contract by the specialist trades permanently ensures the safe operating function. We would be happy to explain more to you in a consultation. Some tips from our side: Please clean the salt container from incrustations at regular intervals and only use high-quality salt. According to the Drinking Water Ordinance, regeneration salt in Germany must meet the purity requirements of: DIN EN 973 Table 1 / Type A / Table 3. These are the most common causes of errors in water softening systems and are easy to avoid. This will prevent unnecessary, not inconsiderable costs incurred by an installer or the factory customer service can arise! Warranty and guarantee If DIN EN 806, Part 5 is observed and installation is carried out by a specialist plumbing company, the guarantee and warranty on the system is 24 months. If you conclude a maintenance contract, the warranty can be extended to up to 5 years (since the manufacturer is a member of the zvshk and is listed there as a trade mark). You can find more about this on page 21 of the manual in the download area (see below). Scope of delivery 1x cabinet with salt container, 1x blending valve with flange connection, 4x screws M6 x 70, 4x safety clamps for connection hoses, 2x connection hoses (length 700mm), 1x rinsing water hose 2m (12x16mm), 3x hose clamp, 1x tension clamp, 1x power plug, 1x drain funnel, 1x hardness measuring set Note: The article is delivered by a forwarding agent to avoid transport damage. * The DVGW - German Association for Gas and Water - stands for technical self-administration in the gas and water sector. Its technical regulations are the basis for safety and reliability in the German gas and water supply. DVGW certification is reliable evidence of compliance with the recognized rules of technology. The SYR LEX Plus 10 Connect S water softener has been DVGW certified. Not many devices have this certificate, and the SYR LEX Plus 10 Connect S is even approved for rental or commercial use.

Universal flange DN 25 from SYR If you do not yet have a suitable flange for the system, you will need this component to connect your SYR LEX PLUS 10 Connect soft water system. This flange is suitable for DRUFI +, IT 3000, IT 4000, LEX Connect individual softening systems 10 to 30, Safe-T and Safe-T Connect as well as other SYR articles. The housing is made of pressed brass and has screw connections on both sides. The installation position can be designed as desired. It is best to order the flange at the same time when you decide on a water softener from SYR.

Very high quality armored hose as 1 inch version with 1 x union nut (ÜM) and 1 x union nut elbow (ÜMB). The polyethylene (PE) hose has a flat seal and is DIN-DVGW tested. The connections are nickel-plated brass. The armored hose is of course suitable for drinking water installations and also for sanitary and water softening systems. The hose material is very flexible and has a high thermal resistance. The high-quality, flexible hose was produced with a drinking water approval (KTW A, W270, W543, DVGW) and is resistant to electrical corrosion. In addition, it has a vacuum resistance of up to 0.1 mbar, even with the smallest bending gradients and temperatures of up to + 80 ° C.

SYR cover universal flange DN 20 - DN 32. For sealing when no valve or water softener is connected to the flange.

Backwash filter, pressure reducer, & leakage protection >> TRIO! With the TRIO DFR/LS from the manufacturer SYR, three fittings now become one. The combination device consists of a semi-automatic, backwashable filter according to DIN EN 13443-1, a pressure reducer according to DIN EN 1567 and a leakage protection according to DIN 3553. Since all this is built into one fitting, you save a lot of space and, of course, installation effort. The backwashable water filter provides for clear water without letting washed in foreign particles into the house installation. The pressure reducer saves water without loss of comfort and keeps the pressure constant. The leakage protection continuously monitors the installation and shuts off the water in case of emergency. As part of the intelligent SYR Connect system, the TRIO DFR/LS Connect can be linked to other devices such as the NeoSoft Connect, NeoDos Connect dosing pump or SafeFloor Connect floor sensor and controlled via app. The functions at a glance Backwash filter - reliably filters foreign particles out of drinking water - prevents pitting and corrosion - Backwash system with strong efficiency pressure reducer - helps to save water (without loss of comfort) - reliably regulates water pressure - Complete pressure reducer cartridge for quick maintenance Leakage protection - continuously monitors the house installation - reliably protects against expensive water damage  and water wastage - detects micro leaks - simplified handling due to self-learning phase - several user profiles adjustable Connect function - WLAN/LAN capable - Control via SYR App - in online mode notifications via  push message and/or e-mail - with the soft water system NeoSoft Connect and  the SafeFloor Connect floor sensors linkable Connection - fits on the SYR flange system (DN 20 to 32)  and on the sandwich flange of the NeoSoft Connect - included in delivery: flange gasket, hexagon socket head screws  for flange mounting, mounting key

The assembly block is suitable for the AquaAvanti IronGo iron filter and manganese filter AquaAvanti ManganGo or where a bypass is needed. If there is limited space at the point of connection, the use of a mounting block is ideal. For safety reasons, it may be desirable to be able to bridge the device unit. For such cases, the mounting block (bypass) is ideal. The installation of a mounting block usually takes about one hour. Your installer will surely make you an offer. If you are not sure if you need a mounting block just ask him. The mounting block is working that way Position 1 When the two outer taps are closed and the middle tap is open, the water flows past the connected device (eg AquaAvanti Iron GO or AquaAvanti ManganGo). Position 2 If the two outer cocks are open and the middle closed, all the water flows through the connected devices. Note: If it is necessary to bridge the units, simply return the mounting block to position 1.

Replacement chlorine cell for the fully automatic chlorination system for water softening systems with Clack control heads, which can be optionally installed in our WatPass Kalk systems. During regeneration, the system produces active chlorine using a so-called brine electrolysis process and is responsible for disinfecting the ion exchange resin. As a rule, the chlorine cell must be replaced every 2-3 years.

SYR Flex hoses in 1.85m length 1" for LEX Plus 10 Connect soft water systems in DVGW quality. If you need longer hoses due to the installation situation, we offer you the original solution from SYR.

Level unit incl. cable fits all soft water systems of the SYR LEX Plus 10 Connect series.

SYR garden hose suitable for NEOSOFT 2500 If you need an outlet for non-softened water for the SYR Neosoft 2500 soft water system (garden, pool, etc.), then the garden line is the perfect solution. The highlight is that when using a SYR sediment filter (Drufi DFR +, TRIO DFR) on the same universal flange as the softening system, you get filtered, non-softened water. This protects downstream devices such as pool pumps, drip irrigation systems, sprinkler systems etc. from damage caused by sediment. Thanks to its extremely simple installation, the component also saves installation costs for an upstream water withdrawal point. This not only saves money, but also space. The outlet fitting is installed downstream of the drinking water filter, but upstream of the water softener, to tap the water. It consists of a T-piece and S-bend. It is best to order the garden flange when you purchase the Neosoft 2500 water softener.