Total Hardness Test set for easy determination of German water hardness ° dH. Accurate measurement with simple titration method. If the indicator solution drips in 5 ml of your test water until it changes color, the water hardness ° dH can be determined very simply and exactly. Applicable for checking the function of hardening plants or decalcifying plants. Naturally also for softening cartridges or all other areas of application for which you want to quickly and easily determine the water hardness down to one degree of accuracy. Prior knowledge by the user is not required. Have fun with determining your water hardness!

The intelligent automatic system of the SYR LEX Plus 10 Connect S ensures that saving salt does not waste a bit of salt and regeneration only takes place when it is needed. The entire system is automatically disinfected each time. For more convenient maintenance or longer periods of absence (such as holidays), the water softener can be easily bridged if necessary without interruption. The plant is optimally suitable for single-family homes up to 6 persons. With the system, a single-family household can save a few hundred euros a year. You will save cleaning agents, detergents, shower gel, hair shampoo, decalcifier for household appliances and, of course, maintenance costs for electrical appliances and installations in your household. Lime settles in pipes or household appliances, as stubborn limestone. This can lead over time to constrictions of the water pipes, to blown heating coils of washing machines and dishwashers, defective water heaters or leaking boilers. Of course, there is no need for hours of cleaning of calcified shower walls, shower cubicles, bathtubs, toilets and sinks. Outstanding is the operating concept of the system with a colored, self-explanatory touch display. The highlight, however, is the control of the system with the SYR Connect APP (available free in the APP Store and on Google Play) which receives updates again and again. So you always know what is going on with your system and can also control your water consumption through the system. Your water feels noticeably softer. Coffee, tea and your food simply taste better by enhancing the water! The advantages of the SYR LEX Plus 10 Connect S:     DVGW certified *, complies with all directives     very low environmentally friendly salt consumption per regeneration     Installation with torsion-free flexible hoses in the plug-in system     Consumption-dependent, water-saving regeneration     Large softening column     automatic disinfection     small space requirement due to compact design     easiest operation by colored Touchdsiplay     Control and operation via SYR Connect APP     Illuminated salt container for easy, quick visual inspection     high throughput     Single column system (saves money and is robust)     Made in Germany     protects against problems with lime in the lines and devices     saves energy     automatic control Components and design The functional parts of the system are made of the highest quality plastic. The housing parts are made of impact-resistant thermoplastic, the rubber parts of age-resistant, durable elastomers. All other functional parts use low-lead, dezincification-resistant brass alloy and stainless steel. The materials used comply with the recognized rules of technology. The plastic parts and elastomers touched by the water comply with the KTW guideline issued by the Federal Environmental Agency. Installation A bypass and blending valve is already included in the delivery. If you already have a drinking water filter from the system DRUFI at the house connection, the connection is extremely easy. There must then be no installation work on the water-bearing system! The decalcification system is then simply screwed into the sandwich (see Figure 2) - DONE! The result is two fittings, a compact filter and softening unit. And that's how easy it is Disconnect the DRUFI, flange the connection fitting with integrated blending device, refit the DRUFI and connect the two hoses of the LEX Plus 10 Connect, no additional flange is required. Installation place The water softening system is installed centrally behind the water meter system. In order to avoid malfunctions, the water softening system is effectively protected by the connection of a drinking water filter (System Drufi). From a pressure of 5 bar, a pressure reducer must be connected in advance. The water to be softened must be clear, free of solid impurities and free of iron and manganese (TWVO values). Maintenance Since the water softener works automatically, you only have to refill salt regularly. In accordance with DIN EN 806, Part 5, maintenance must be carried out at least once a year. A maintenance contract by the specialized trade permanently establishes the safe operation function. We will gladly give you more information in a consultation. Some tips from our side: Please clean the salt container of incrustations at regular intervals and use only high quality salt. According to the Drinking Water Ordinance, regeneration salt in Germany must comply with the purity requirements of: DIN EN 973 Table 1 / Type A / Table 3. These are the most frequent causes of faults in water softening systems and are easy to avoid. This will prevent unnecessary, not insignificant costs that may arise through an installer or the factory customer service! Paid installation service by factory customer service or specialized specialist company: For the area of ??Central Germany we can arrange for a specialized company, where you usually get an appointment within 2-4 weeks. The costs are performance-related and are negotiated directly with the executing specialist. Details on the installation situation will be clarified in advance. We receive no commission for the mediation! Alternatively and optionally, the Werkskundienst undertakes this work. We are happy to make the contact. Please contact us if this service is interesting for you. Warranty and guarantee In compliance with the DIN EN 806, Part 5 and the installation by a Santärfachbetrieb the warranty and warranty on the system is 24 months. If you conclude a maintenance contract, the warranty may be extended to up to 5 years (as the manufacturer is a member of zvshk and is listed there as a handyman brand). You will find more about this on page 21 of the manual in the download area (see below). Scope of delivery 1x cabinet with salt container, 1x blending valve with flange connection incl. closing flap, 4x screws M6 x 70, 4x safety clamps for connection hoses, 2x connection hoses (length 700mm), 1x rinsing water hose 2m (12x16mm), 3x hose clamp, 1x tension clamp, 1x power plug, 1x drain funnel, 1x hardness measuring set Note: The item we delivered to avoid transport damage by freight carrier. * The DVGW - German association of gas and water specialist - stands for the technical self-administration in the gas and water sector. Its technical regulations are the basis for safety and reliability in the German gas and water supply. A DVGW certification is the reliable proof of compliance with the recognized rules of technology. The softening system Delfin has been certified DVGW. This certificate does not have a lot of equipment, and the dolphin is even licensed for rental or commercial use.

Universal flange DN 25 from SYR If you do not yet have a suitable flange for the system, you will need this component to connect your SYR LEX PLUS 10 Connect soft water system. This flange is suitable for DRUFI +, IT 3000, IT 4000, LEX Connect individual softening systems 10 to 30, Safe-T and Safe-T Connect as well as other SYR articles. The housing is made of pressed brass and has screw connections on both sides. The installation position can be designed as desired. It is best to order the flange at the same time when you decide on a water softener from SYR.

The decalcifying cartridge improves the taste of cold and hot drinks (especially to improve the aroma of coffee and tea) and protects household appliances against calcification. The flowed through ion exchange resin, reduces the hardness of the water.The cartridge fits into the table top filter units "Mercuro" and "Jupitos" as well as the sub-filter housings of the “Vario HP” and “Pure"series. This cartridge is also compatible with all Alvito water filter systems. Use: The water flow should not exceed about 2 l / min., so that a noticeable decalcification is guaranteed. The possible duration of use depends on the degree of hardness of the input water. Depending on the raw water hardness up to 1.900 l (degree of hardness 5-10 dh) or 450 l (degree of hardness 11-25 dh) can be achieved as static quantity. The ion exchange resin in the cartridge can be replaced by yourself. The change is made when the symptoms typical of the calf such as tea skin, aroma loss in tea / coffee or lime deposits on surfaces occur again. According to DIN 1988, a change of granules is required after 6 months at the latest. Use only with cold water. Protect from frost.

Replacement filter cartridge for the Aqua Avanti Inline main and extension filter stages. Decalcification Inline The flowed through ion exchange resin reduces the hardness of the water. The decalcifying cartridge improves the taste of cold and hot drinks (especially to improve the aroma of coffee and tea) and protects household appliances against calcification. Use: The water flow should not exceed about 2 l / min. so that a noticeable descaling is guaranteed. The possible duration of use depends on the degree of hardness of the input water. Depending on the raw water hardness up to 1,900 l (hardness 5-10 dh) or 450 l (degree of hardness 11-25 dh) can be achieved as static quantity. The cartridge must be changed, if the typical chalk appearances like a film is built on the surface of the tea beverage, loss of tea aroma / coffee or calcification deposits on surfaces. According to DIN 1988, a change is required after 6 months at the latest. Only use with cold water. Protect from frost.

The intelligent automatic system of the SYR LEX Plus 10 SL Connect ensures that no salt is wasted through economy salting and regeneration only takes place when it is necessary. The entire system is automatically disinfected each time. The highlight of the model variant SL is the fully integrated leakage protection, which can protect you from the consequences of expensive water damage. The leakage protection and the SYR soft water system interact with each other. If your LEX Plus 10 SL Connect requires water for regeneration, it is reported to the leak protection system, which then releases the appropriate amount of water. For non-integrated solutions, this could potentially trigger a leak alarm. Not so with the SYR system, so you do not have to do anything during the rain! For more convenient maintenance or longer periods of absence (eg holidays), the water softener can be bypassed without interruption, if necessary. The plant is optimally suitable for single-family homes up to 6 persons. With the system, a single-family household can save a few hundred euros a year. You save detergents, detergents, shower gel, hair shampoo, decalcifier for household appliances and additional maintenance costs for electrical appliances and installations in your household. Lime settles in pipes or household appliances, as stubborn limestone. This can lead over time to constrictions of the water pipes, to blown heating coils of washing machines and dishwashers, defective water heaters or leaking boilers. In addition, there is no need for hours of cleaning of calcified shower walls, shower cubicles, bathtubs, toilets and sinks. Outstanding is the operating concept of the system with a colored, self-explanatory touch display. The highlight, however, is the digital control option of the system with the SYR Connect APP (available free of charge in the APP Store and on Google Play), which receives frequent updates. So you always know what's going on with your system and can also control your water consumption through the system. Your water feels noticeably softer. Coffee, tea and food taste better by softening the water! The advantages of the SYR LEX Plus 10 SL Connect:     DVGW certified *     Leakage protection fully integrated     License for rental and commercial use     very low environmentally friendly salt consumption per regeneration     Installation with torsion-free flexible hoses in the plug-in system     Consumption-dependent, water-saving regeneration     big softening column     automatic disinfection     small space requirement due to compact design     easiest operation by colored Touchdsiplay     Control and operation via SYR Connect APP     illuminated salt container for easy, quick visual inspection     high throughput     cost-minimizing, robust single column system     Made in Germany     nationwide customer service or maintenance by a trained specialist     protects against Kalkinfarkt of lines and devices     saves energy     automatic control   Components and design The functional parts of the system are made of the highest quality plastic. The housing parts are made of impact-resistant thermoplastic, the rubber parts of age-resistant, durable elastomers. All other functional parts use a low-lead, dezincification-resistant brass alloy and stainless steel. The materials used comply with the recognized rules of technology. The plastic parts and elastomers touched by the water comply with the KTW guideline issued by the Federal Environmental Agency. Installation A bypass and blending valve is already included in the delivery. If you already have a drinking water filter from the system DRUFI at the house connection, the connection is extremely easy. There must then be no installation work on the water-bearing system! The decalcification system is then simply screwed into the sandwich (see Figure 2) - DONE! The result is two fittings, a compact filter and softening unit. And that's how easy it is Disconnect the DRUFI, flange the connection fitting with integrated trimming device, refit the DRUFI and connect the two hoses of the LEX Plus 10 SL Connect, no additional flange is required. Installation place The water softening system is installed centrally behind the water meter system. In order to avoid malfunctions, the water softening system is effectively protected by the connection of a drinking water filter (System Drufi). From a pressure of 5 bar, a pressure reducer must be connected in advance. The water to be softened must be clear, free of solid impurities and free of iron and manganese (TWVO values). Installation, Maintenance & Commissioning Since the water softener works automatically, you only have to refill salt regularly. In accordance with DIN EN 806, Part 5, maintenance must be carried out at least once a year. A maintenance contract by the specialized trade permanently produces the safe operation function. We would like to explain more about this in a consultation. Some tips from our side: Please clean the salt container of incrustations at regular intervals and use only high quality salt. According to the Drinking Water Ordinance, regeneration salt in Germany must comply with the purity requirements of: DIN EN 973 Table 1 / Type A / Table 3. These are the most frequent causes of faults in water softening systems and are easy to avoid. This will prevent unnecessary, not insignificant costs that may arise through an installer or the factory customer service! Paid installation service by a specialized specialist: For the area of ??Central Germany, we can arrange a specialized company, where you usually get an appointment within 2-4 weeks. The costs are performance-related and are negotiated directly with the executing specialist. Details on the installation situation will be clarified in advance. We receive no commission for the mediation! Alternatively and optionally, the Werkskundienst undertakes this work. We are happy to make the contact. Please contact us if this service is interesting for you. Warranty and guarantee In compliance with the DIN EN 806, Part 5 and the installation by a sanitary specialist company, the guarantee and warranty on the system is 24 months. If you conclude a maintenance contract, the warranty may be extended to up to 5 years (as the manufacturer is a member of zvshk and is listed there as a handyman brand). You will find more about this on page 21 of the manual in the download area (see below). Scope of delivery 1x cabinet with salt container, 1x blending valve with flange connection incl. closing flap, 4x screws M6 x 70, 4x safety clamps for connection hoses, 2x connection hoses (length 700mm), 1x rinsing water hose 2m (12x16mm), 3x hose clamp, 1x tension clamp, 1x power plug, 1x drain funnel, 1x hardness measuring set Note: The item we delivered to avoid transport damage by freight carrier. * The DVGW - German association of gas and water specialist - stands for the technical self-administration in the gas and water sector. Its technical regulations are the basis for safety and reliability in the German gas and water supply. A DVGW certification is the reliable proof of compliance with the recognized rules of technology. The SYR LEX Plus 10 SL Connect water softener has been DVGW certified. This certificate does not have many devices, and the SYR LEX Plus 10 SL Connect is even licensed for rental or professional use.

Ion exchange resin for the decalcifying cartridge (Article No .: 1083) Application: Water softening for drinking purposes (not for domestic hot water). Do not use with water below 6.5 pH. Description: Limescale removal by ion exchange Carbonate hardness is reduced. Can only be used in conjunction with decalcifying cartridge (Article No .: 1083). Dimension: 0.65 l, in the welding bag Power: Depending on the hardness of the source water, see operating instructions. Disposal after the end of service life in the household waste for reasons of hygiene, a change of at least half a year is recommended Resin color: light beige Flow: limitation to D = 1 l / min is recommended; higher flow rates are possible, but reduce the withdrawal rate Flow limitation via the setting of the ball valve (see operating instructions) or via a flow regulator (see spare parts & accessories) the pH of the filtered water drops slightly, so please do not use at pH values below 6.5 Notice: The consumption period entered on the cardboard sticker corresponds to a minimum shelf life. It is generally indicated to 6 months after bottling and ensures that the granules do not dry out (dehydration). The storage of larger quantities of refill packs therefore makes no sense. The granules are still fully effective after the deadline when it is slightly humid (such as moist soil). A return after the end of the consumption period is not possible. Use only with cold water. Protect from frost.

The new NeoSoft Connect 2500 soft water system from SYR with patented single-hose system and touchscreen. The system is ideal for detached houses with up to 3 residential units (up to approx. 6 people). Automatic adjustment of the operating mode The innovative and intelligent automatic adjustment of the operating mode is a real highlight. The integrated turbine of the NeoSoft water softener continuously measures the water consumption so that the intelligent system can always optimally adapt the operating mode to the water consumption. Whether ECO, STANDARD or POWER - the currently active mode is displayed on the system using LED colour coding.  Large salt tank with soft-close lid Filling the salt tank, which now holds 40 kg, is extremely convenient thanks to the new soft-close lid. This is a considerable improvement compared to the SYR Lex Plus 10 models. The salt level indicator informs you when it needs to be topped up. Leakage warning system The self-learning, integrated SYR leakage warning system is a real innovation. The system notifies you via push messages on your smartphone if a leak is detected in your domestic water installation. Of course, this requires the system to be connected to your smartphone. Modern communication If the NeoSoft Connect is connected to the internet via WLAN or LAN, it can be controlled via the SYR app. Registered users also receive push notifications when salt needs to be topped up, for example. If the raw water hardness changes, the NeoSoft Connect issues a warning.  Statistics such as water consumption, a logbook, maintenance settings and performance - the NeoSoft Connect can be operated via touchscreen and in online mode with the SYR app via tablet and smartphone and guides you through every process with clear displays. For convenient maintenance or longer periods of absence (e.g. holidays), the water softener can be bypassed without interruption if required. Simple installation The NeoSoft Connect offers everything for a time-saving and safe connection, as the flush and overflow hoses are already permanently connected to the system. The sandwich connection flange is placed on the SYR universal flange. The flexible, patented hose connection is fitted using a torsion-proof plug-in system. Then connect the rinsing and overflow hoses to the drain funnel included in the scope of delivery and fill with regenerating salt. The installation checklist shows whether the installation has been completed. Save money and resources The system offers a potential saving of several hundred euros per year for a single-family household. You save on cleaning agents, detergents, shower gel, hair shampoo, descaling agents for household appliances and additional maintenance costs for electrical appliances and installations in your household. Limescale builds up in pipes or household appliances as stubborn limescale. Over time, this can lead to constricted water pipes, burnt-out heating coils in washing machines and dishwashers, defective instantaneous water heaters or leaking boilers. In addition, there is no need to spend hours cleaning calcified shower walls, shower cubicles, bathtubs, toilets and sinks. Water quality Your water feels noticeably softer. Coffee, tea and food simply taste better when the water is softened! The advantages of the SYR Neosoft Connect 2500 very low environmentally friendly salt consumption per regeneration Installation with patented single-hose system. The system is supplied pre-assembled and ready for connection. The hose is torsion-free thanks to the innovative connector system. Consumption-dependent, water-saving regeneration Automatic disinfection Self-learning leak alert system Low space requirement due to compact design Easy operation thanks to colour 4.2" touchscreen Control and operation via SYR Connect APP Illuminated salt container for simple, quick visual inspection Sandwich flange for connecting the TRIO DFR/LS, DRUFI+ and SafeTech+ Connect High throughput capacity Made in Germany Nationwide customer service or maintenance by a trained specialist company protects pipes and appliances from limescale infarction saves energy automatic control Components and design The functional parts of the system are made of the highest quality plastic. The housing parts are made of impact-resistant thermoplastic, the rubber parts of age-resistant, hard-wearing elastomers. A low-lead, dezincification-resistant brass alloy and stainless steel are used for all other functional parts. The materials used comply with the recognised rules of technology. The plastic parts and elastomers that come into contact with water comply with the KTW guidelines of the German Federal Environment Agency. Installation If you already have a drinking water filter from the DRUFI system on the house connection, the connection is extremely simple. No installation work needs to be carried out on the water-bearing system! The descaling system is then simply screwed into the sandwich - DONE! A compact filter and softening unit or leakage protection unit is created from two fittings. And it's as simple as this Unscrew the DRUFI, flange on the connection fitting with integrated blending device, refit the DRUFI and connect the two hoses of the SYR Neosoft Connect 5000; an additional flange is not required. Installation location The water softener is installed centrally behind the water meter. To prevent malfunctions, the water softener is effectively protected by connecting a drinking water filter (Drufi system) upstream. From a pressure of 5 bar, a pressure reducer must be connected upstream. The water to be softened must be clear, free of solid impurities and free of iron and manganese (values within the scope of the German law). Maintenance As the water softener works automatically, salt only needs to be topped up regularly. According to DIN EN 806, Part 5, maintenance must be carried out at least once a year, and every six months for shared systems. A maintenance contract with a specialist installer ensures that the system continues to function reliably. We will be happy to explain more about this in a consultation. A few tips from us: Please clean the salt container at regular intervals to remove incrustations and only use high-quality salt. According to the Drinking Water Ordinance, regenerating salt in Germany must fulfil the purity requirements of: DIN EN 973 Table 1/Type A/Table 3. These are the most common causes of faults in water softening systems and are easy to avoid. This will prevent unnecessary, not inconsiderable costs that can be incurred by an installer or the customer service centre! Maintenance and commissioning by the customer service centre If required, you can have the recommended maintenance carried out by SYR's customer service. In the download area you will find a request form which you can use to contact SYR directly. We do not receive any commission for the referral. You therefore only have direct contact with the manufacturer. This service is not a matter of course in the industry and we are pleased to be able to offer you this service! Warranty and guarantee If DIN EN 806, Part 5 is observed and the system is installed by a specialised plumbing company, the guarantee and warranty for the system is 24 months. Scope of delivery 1x NeoSoft 2500 Connect soft water system, 1x hardness measuring set, 1x sandwich flange, patented armoured hose, 1x drain funnel with adapter for filter, mains adapter, adapter and hose nozzle for use with Drufi, NeoDos connection set for Neosoft, quick start guide   Note: The item is delivered by a forwarding agent to avoid transport damage.

The set is tool-free and very easy to use during routine maintenance. We recommend to do this every 24 months. It fits all Clack WS 1 CI control heads no matter where they are used.   Scope of delivery: Main piston seal cage, main piston & bowl

The SYR LEX Plus 10 Connect is intended as a "stand alone" solution for those who do not intend to sandwich a DRUFI DFR house entrance filter in front of the system. It is not suitable for installation between the universal flange and the Drufi + DFR, but in contrast to the Connect S version, it has a nicely covered blending valve with the same function. The intelligent automatic system of the SYR LEX Plus 10 Connect ensures that no salt is wasted due to the low salting and that regeneration only takes place when it is necessary. The entire system is automatically disinfected every time. For more convenient maintenance or longer periods of absence (e.g. vacation), the water softener can be bridged without interruption if necessary. The system is ideal for single-family houses up to 6 people. With the system, there is a potential savings of several hundred euros per year for a single family household. You save cleaning agents, detergents, shower gel, hair shampoo, descaler for household appliances and additional maintenance costs for electrical devices and installations in your household. Lime builds up in pipes or household appliances as stubborn limestone. Over time, this can lead to constrictions in the water pipes, burned-out heating coils in washing machines and dishwashers, defective instantaneous water heaters or leaking boilers. In addition, there is no need to spend hours cleaning calcified shower walls, shower cubicles, bathtubs, toilets and sinks. The operating concept of the system with its colored, self-explanatory touch display is outstanding. The highlight, however, is the digital control option of the system with the SYR Connect APP (available free of charge in the APP Store and on Google Play), which receives updates again and again. So you always know what's going on with your system and can also control your water consumption via the system. Your water feels noticeably softer. Coffee, tea and food simply taste better because the water is softened! The advantages of the SYR LEX Plus 10 Connect • DVGW certified * • Approval for rental and commercial use • Very low environmentally friendly salt consumption per regeneration • Installation with torsion-free flexible reinforced hoses in the plug-in system • Consumption-dependent, water-saving regeneration • large softening column • automatic disinfection • Small space requirement due to compact design • Easiest operation thanks to colored touch screen display • Control and operation via SYR Connect APP • Illuminated salt container for easy, quick visual inspection • high throughput • Cost-minimizing, robust single-column system • Made in Germany • Nationwide factory customer service or maintenance by trained specialist company • protects against calcium infarction in pipes and devices • saves energy • automatic control Components and execution The functional parts of the system are made of the highest quality plastic. The housing parts are made of impact-resistant thermoplastic, the rubber parts are made of age-resistant, hard-wearing elastomers. A low-lead, dezincification-resistant brass alloy and stainless steel are used for all other functional parts. The materials used correspond to the recognized rules of technology. The plastic parts and elastomers that come into contact with water correspond to the KTW guideline of the Federal Environment Agency. Installation Installation is carried out by your installer. Commissioning is designed to be extremely simple. A bypass and blending valve, as well as hoses and an overall hardness test set are included in the scope of delivery. Installation location The softening system is installed centrally behind the water meter system. In order to avoid malfunctions, the water softener is effectively protected by connecting a drinking water filter (e.g. Drufi system). A pressure reducer must be connected upstream from a pressure of 5 bar. The water to be softened must be clear, free of solid impurities and free of iron and manganese (values ??within the scope of the TWVO). Installation, maintenance & commissioning Since the water softener works automatically, salt only needs to be topped up regularly. According to DIN EN 806, Part 5, maintenance must be carried out at least once a year, and maintenance for communal systems every six months. A maintenance contract by the specialist trades permanently ensures the safe operating function. We would be happy to explain more to you in a consultation. Some tips from our side: Please clean the salt container from incrustations at regular intervals and only use high-quality salt. According to the Drinking Water Ordinance, regeneration salt in Germany must meet the purity requirements of: DIN EN 973 Table 1 / Type A / Table 3. These are the most common causes of errors in water softening systems and are easy to avoid. This will prevent unnecessary, not inconsiderable costs incurred by an installer or the factory customer service can arise! Warranty and guarantee If DIN EN 806, Part 5 is observed and installation is carried out by a specialist plumbing company, the guarantee and warranty on the system is 24 months. If you conclude a maintenance contract, the warranty can be extended to up to 5 years (since the manufacturer is a member of the zvshk and is listed there as a trade mark). You can find more about this on page 21 of the manual in the download area (see below). Scope of delivery 1x cabinet with salt container, 1x blending valve with flange connection, 4x screws M6 x 70, 4x safety clamps for connection hoses, 2x connection hoses (length 700mm), 1x rinsing water hose 2m (12x16mm), 3x hose clamp, 1x tension clamp, 1x power plug, 1x drain funnel, 1x hardness measuring set Note: The article is delivered by a forwarding agent to avoid transport damage. * The DVGW - German Association for Gas and Water - stands for technical self-administration in the gas and water sector. Its technical regulations are the basis for safety and reliability in the German gas and water supply. DVGW certification is reliable evidence of compliance with the recognized rules of technology. The SYR LEX Plus 10 Connect S water softener has been DVGW certified. Not many devices have this certificate, and the SYR LEX Plus 10 Connect S is even approved for rental or commercial use.

Universal flange DN 25 for pressing SYR If you do not yet have a suitable flange for the system, you will need this component to connect your SYR LEX PLus 10 Connect soft water system. This flange is suitable for DRUFI +, IT 3000, IT 4000, LEX Connect individual softening systems 10 to 30, Safe-T and Safe-T Connect as well as other SYR articles. The housing is made of gunmetal and has press connections on both sides (Viega press system for use in copper and stainless steel pipe installations). The installation position can be designed as desired. It is best to order the flange at the same time when you decide on a water softener from SYR.

Universal flange DN 25 from SYR If you do not yet have a suitable flange for the system, you will need this component to connect your SYR LEX PLUS 10 Connect soft water system. This flange is suitable for DRUFI +, IT 3000, IT 4000, LEX Connect individual softening systems 10 to 30, Safe-T and Safe-T Connect as well as other SYR articles. The housing is made of pressed brass and has screw connections on both sides. The installation position can be designed as desired. It is best to order the flange at the same time when you decide on a water softener from SYR.

SYR cover universal flange DN 20 - DN 32. For sealing when no valve or water softener is connected to the flange.

SYR garden hose suitable for NEOSOFT 2500 If you need an outlet for non-softened water for the SYR Neosoft 2500 soft water system (garden, pool, etc.), then the garden line is the perfect solution. The highlight is that when using a SYR sediment filter (Drufi DFR +, TRIO DFR) on the same universal flange as the softening system, you get filtered, non-softened water. This protects downstream devices such as pool pumps, drip irrigation systems, sprinkler systems etc. from damage caused by sediment. Thanks to its extremely simple installation, the component also saves installation costs for an upstream water withdrawal point. This not only saves money, but also space. The outlet fitting is installed downstream of the drinking water filter, but upstream of the water softener, to tap the water. It consists of a T-piece and S-bend. It is best to order the garden flange when you purchase the Neosoft 2500 water softener.

Replacement chlorine cell for the fully automatic chlorination system for water softening systems with Clack control heads, which can be optionally installed in our WatPass Kalk systems. During regeneration, the system produces active chlorine using a so-called brine electrolysis process and is responsible for disinfecting the ion exchange resin. As a rule, the chlorine cell must be replaced every 2-3 years.

Water filter under-sink solution for the removal of lime (decalcification by ion exchange) of the AquaAvanti Inline series with the innovative quick-change housings. This main filter stage is the basic system that can be used as the sole filter system. In addition, it is the basis for one or two expansion stages. Description of the filter descaling AquaAvanti Inline The ion exchange resin flowed through reduces the hardness of the water. The descaling cartridge improves the taste of cold and hot drinks (especially to improve the aroma of coffee and tea) and protects household appliances from calcification.  Usage: The water flow should not exceed approx. 2 l/min. to ensure noticeable descaling. The possible service life depends on the hardness of the input water. Depending on the raw water hardness, up to 1,900 l (degree of hardness 5-10 dh) or 450 l (degree of hardness 11-25 dh) can be achieved as a standing volume. The cartridge must be replaced when the limescale-typical phenomena such as tea skin, loss of aroma with tea/coffee or limescale deposits on surfaces reappear. According to DIN 1988, a change is required after 6 months at the latest. Advantages of the Aqua Avanti Inline system compared to conventional filter housings Forget about dismantling and unscrewing filter housings to change filters. With the AA Inline filter system, you can change filter cartridges in seconds. Simply remove the filter cartridge by turning it counterclockwise and insert a new filter cartridge the other way around. Done. You no longer need a housing key. Since you do not come into contact with the inside of the filter cartridge, the exchange is very hygienic. Connections (standard connection set is included) The included faucet adapter has a 3/8" standard thread and thus fits to the faucets offered by us mesiten of. An adaptation to other threads e.g. UNS 7/16-24 is of course optionally possible. For easy connection to the corner tap under the sink, a high-quality European connection adapter JG ASV-7 is supplied with each main filter stage, so that they do not need an additional corner valve with existing 3 / inch cold water connection. Also a leakage protection is supplied, which provides you with additional safety. Additional accessories As an alternative to the enclosed connection set, you can find suitable adapters in the Accessories & Spare Parts category for easier, space-saving installation. Optionally available are: -Connector -Adapter DM 3/8 inch to 3/8 inch 90 degree -3/8 inch connection hose, AA inline filter -flow regulator 1.9l min 3/8 inch inline Note: Flow rate should be limited to approximately 2l/min for good softening performance. Use only with cold water. Protect from frost.

This fully automated chlorination system for water softening systems, with Clack control heads, produces active chlorine via brine electrolysis during regeneration. It is used for the sterilization of the ion exchange resin. The production of the chlorine can be adjusted depending on the investment conditions. For this purpose, the time duration (2-70 min) of the desired sterilization is set on the device. The system can be used in conjunction with automatic control heads (Clack WS 1 CI). The control system consists of a multifunctional transformer, with socket connection. The built-in titanium electrode is located in a separate T-piece, which is installed in the brine suction line. When the system is activated, the power indicator lights green. During disinfection, a yellow LED lights up. Repeated chlorination helps to prevent germs. The chlorine is flushed out into the sewage system at the end of the regeneration. Delivery: 1x automatic chlorination system including power supply, T-piece 3/8 "+ titanium electrode

The cartridge can be refilled with ion exchange resin for water softening, for example. This makes ecological sense and is easy on your wallet at the same time. The cartridge fits into the countertop filter units and under-sink filter units from Carbonit, WatPass and the Aqua Avanti series. This cartridge is also compatible with all Alvito water filter systems. Used as a descaling cartridge, it improves the taste of cold and hot drinks (especially for improving the aroma of coffee and tea) and protects household appliances against limescale. The ion exchange resin that flows through it reduces the hardness of the water. Use with ion exchange resin from our store: The water flow should not exceed approx. 2 l/min. to ensure noticeable descaling. The possible service life depends on the hardness of the incoming water. Depending on the hardness of the raw water, up to 1,900 l (hardness level 5-10 dh) or 450 l (hardness level 11-25 dh) can be achieved. The ion exchange resin in the cartridge can be replaced independently. It is replaced when the typical limescale phenomena such as tea skin, loss of aroma in tea/coffee or limescale deposits on surfaces reappear. According to DIN 1988, granules must be replaced after 6 months at the latest. Note for your order: The cartridge is supplied without filling. Please remember to purchase the ion exchange resin when ordering for the first time. Only use with cold water. Protect from frost.

Entkalkung (Ionenaustauscher Carbonhärte) als Erweiterungsfilterstufe der Aqua Avanti Inline-Serie mit Schnellwechselgehäusen und original CARBONIT-Filtern.Diese Erweiterungsfilterstufe kann in Verbindung mit einer Hauptfilterstufe genutzt werden.Die Erweiterungsstufe besteht aus einer Filterpatrone und dem Filterkopf, aber einem kürzeren Verbindungsschlauch zum Anschluss an die Hauptfilterstufe.Beschreibung des Aqua Avanti Inline-Systems:Vergessen Sie das Abbauen und Aufschrauben von Filtergehäusen zum Filterwechsel. Mit dem AA Inline Filtersystem können Sie die Filterpatronen in Sekunden wechseln. Dazu einfach die Filterkartusche durch Linksdrehung abnehmen und umgekehrt eine neue Filterkartusche einsetzen. Fertig. Man braucht keinen Gehäuseschlüssel mehr. Da man nicht in Kontakt mit dem Inneren der Filterpatrone kommt, erfolgt der Austausch sehr hygienisch.Beschreibung des enthaltenen Filters "Entkalkung Inline":Das durchflossene Ionentauscherharz reduziert die Härte des Wassers. Die Entkalkungskartusche verbessert den Geschmack von Kalt- und Heißgetränken (speziell zur Aromaverbesserung von Kaffee und Tee) und schu?tzt Haushaltsgeräte vor Verkalkung.  Nutzung: Der Wasserfluss sollte nicht mehr als ca. 2 l/min. betragen, damit eine merkbare Entkalkung gewährleistet ist. Die mögliche Nutzungsdauer hängt vom Härtegrad des Eingangswassers ab. Je nach Rohwasserhärte sind bis zu 1.900 l (Härtegrad 5-10 dh) bzw. 450l (Härtegrad 11-25 dh) als Standmenge erreichbar. Die Kartusche muss gewechselt werden, wenn die kalktypischen Erscheinungen wie Teehaut, Aromaverlust bei Tee/Kaffe oder Kalkablagerungen auf Flächen wieder auftreten. Laut DIN 1988 ist ein Wechsel nach spätestens 6 Monaten erforderlich.

Universal flange DN 25 for pressing SYR If you do not yet have a suitable flange for the system, you will need this component to connect your SYR LEX PLus 10 Connect soft water system. This flange is suitable for DRUFI +, IT 3000, IT 4000, LEX Connect individual softening systems 10 to 30, Safe-T and Safe-T Connect as well as other SYR articles. The housing is made of gunmetal and has press connections on both sides (Viega press system for use in copper and stainless steel pipe installations). The installation position can be designed as desired. It is best to order the flange at the same time when you decide on a water softener from SYR.

Innovation - Drinking water softening system in a cabinet housing with English menu navigation, color display for faster recognition of operating conditions & control head from Clack The WatPass® water softening systems are a real innovation. They work according to the ion exchange method. This procedure is the establishment test for water softening. Our systems are available in 2 variants: 1. Standard salting for normal households Best sensory result and adequate softening for the entire household. The WatPass® lime is particularly energy-saving! By salting the regenerating salt is used optimally. If you are using the system for technical applications, please note the following values ??when cutting. A perfect wash result for glasses is available at values ??of <150 µS / cm and for cutlery, the system should be set to <80 µS / cm. Your advantages: • no calcified heating rods & spray nozzles • better energy utilization of the devices 2. Swiss version For operation in Switzerland, the SVGW regulation must be observed. Therefore, the systems for Switzerland are supplied with nylon protective sock and silver resin. Otherwise, the system is designed as the standard version! Nylon protective stocking / fine salt: Normally, softening plants in Switzerland are used with fine salt instead of salt tablets. Water softening systems that we deliver to Switzerland are therefore equipped by us with a nylon protective stocking so that you can operate the softening systems with fine salt. As a result, a blocking of the salt in the system is excluded. Silver resin content (min 2%): The ion exchange resin must contain a minimum of 2% silver resin. Regeneration with ion exchange resin - how does it work? When hard water is passed over the resin, the calcium and magnesium ions (Ca2 + / Mg2 +) present in the water are exchanged for the sodium ions (Na +) present on the resin. The resin we use has a lifespan of over 20 years. Your advantages Softer water protects your installations, the heating system, washing machines and small appliances such as kettles and coffee machines. The limescale deposits on your shower enclosure, washbasins, toilets, etc. are greatly reduced. You can save significant amounts of detergent, soaps and shampoo and the water just tastes better. Especially tea lovers, coffee drinkers and ambitious home cooks will appreciate the result of softened water. Anyone who has used a water softening system would never want to do without it again. When does it make sense to use a water softening system? The DIN 1988-200 recommends in Table 6 above a hardness of 2.5 mol / m³ (14 ° dH) for drinking water cold hardness stabilization or softening. The water is not fully softened for drinking water purposes, but by means of the mounting block to a water hardness of about 6-7 ° dH, if technically possible, blended. If the water is even softer, it can become corrosive and thus pose a problem for the installations. Moreover, it does not taste that good either. Construction of water softening systems WatPass® A cabinet housing with removable lid, in which a GFK pressure bottle (filled with ion exchange resin) sits, form the basis for the extremely low-maintenance Clack control valve with color display and English operation. This is a real innovation and makes the handling of the system a lot easier. The system is of course volume controlled. The innovative valve can be disassembled and maintained completely without tools. Regeneration - what is it? If the pre-set volume of soft water flow is reached, regeneration of the resin will be triggered at 2:00 am. A reserve capacity is programmed by us as a safety factor in the unit, so that lime-free water is available after the pre-set water capacity has been reached, until regeneration. During regeneration, the water softener automatically routes saline (sodium chloride) through the ion-exchange resin. In this process, the resin is again afflicted with sodium ions (Na +). The calcium and magnesium ions (Ca2 + / Mg2 +) are derived with the saline solution via a separate drain port. Now the resin is ready to re-soften your drinking water. During regeneration, the WatPass® 10000 delivers untreated tap water, so that the water supply is given. In case of inactivity of the plant (eg vacation) a compulsory regeneration is triggered every 10 days to prevent the germination of the resin bed. How long does a filling of salt last? Depending on the water hardness and your water consumption, a filling is enough for about 3-4 months, then new salt must be refilled. The integrated safety float valve protects you from overflowing water System size For households up to: 5-7 persons The WatPass® Kalk 10000 water softening system consists of: A cabinet housing for a salt supply, depending on the required size of the system. A volume-controlled central control valve type Clack WS 1 CI, with German menu navigation and color display. Integrated in the system, a GRP pressure bottle filled with high quality ion exchange resin. The scope of delivery also includes a mounting block, a connection set & 2x 25 kg high quality salt tablets for the WatPass® water softening system. These consist of:      Mounting block 1 inch with intersection, sampling tap and bypass function      1x Hardness cutlery (2-pack), 2x reinforced hose 1 "with union nuts (length 1000mm (DIN) DVGW tested), 4x seals, 1x drain hose length 2.000mm, 1x overflow hose length 2.000mm, 1x hose clamp      2x 25 kg high quality salt trays Installation conditions for all plant sizes:     Drinking or raw water connection     Socket 230 V / 50 Hz     Waste water connection     Pressure reducer at> 6 bar     Domestic water filter at the entrance     Connection thread: 1 inch     frost-free installation site If you need a plumber, we can arrange for you a specialized specialist company for the area of Central Germany, where you usually get an appointment within 2-4 weeks. The costs are performance-related and are negotiated by you directly with the executive specialist. Details on the installation situation will be clarified in advance. We receive no commission for the mediation! Please contact us if this service is interesting for you. For the installations according to DVGW guidelines, a DVGW certified pipe separator is available on request (not required for own well). The plant is delivered by freight carrier. Please tell us when ordering necessarily a phone number under which you can be reached on delivery.

Innovation - Drinking water softening system in a cabinet housing with English menu navigation, color display for faster recognition of operating conditions & control head from Clack The WatPass® water softening systems are a real innovation. They work according to the ion exchange method. This procedure is the establishment test for water softening. Our systems are available in 2 variants: 1. Standard salting for normal households Best sensory result and adequate softening for the entire household. The WatPass® lime is particularly energy-saving! By salting the regenerating salt is used optimally. If you are using the system for technical applications, please note the following values ??when cutting. A perfect wash result for glasses is available at values ??of <150 µS / cm and for cutlery, the system should be set to <80 µS / cm. Your advantages: • no calcified heating rods & spray nozzles • better energy utilization of the devices 2. Swiss version For operation in Switzerland, the SVGW regulation must be observed. Therefore, the systems for Switzerland are supplied with nylon protective sock and silver resin. Otherwise, the system is designed as the standard version! Nylon protective stocking / fine salt: Normally, softening plants in Switzerland are used with fine salt instead of salt tablets. Water softening systems that we deliver to Switzerland are therefore equipped by us with a nylon protective stocking so that you can operate the softening systems with fine salt. As a result, a blocking of the salt in the system is excluded. Silver resin content (min 2%): The ion exchange resin must contain a minimum of 2% silver resin. Regeneration with ion exchange resin - how does it work? When hard water is passed over the resin, the calcium and magnesium ions (Ca2 + / Mg2 +) present in the water are exchanged for the sodium ions (Na +) present on the resin. The resin we use has a lifespan of over 20 years. Your advantages Softer water protects your installations, the heating system, washing machines and small appliances such as kettles and coffee machines. The limescale deposits on your shower enclosure, washbasins, toilets, etc. are greatly reduced. You can save significant amounts of detergent, soaps and shampoo and the water just tastes better. Especially tea lovers, coffee drinkers and ambitious home cooks will appreciate the result of softened water. Anyone who has used a water softening system would never want to do without it again. When does it make sense to use a water softening system? The DIN 1988-200 recommends in Table 6 above a hardness of 2.5 mol / m³ (14 ° dH) for drinking water cold hardness stabilization or softening. The water is not fully softened for drinking water purposes, but by means of the mounting block to a water hardness of about 6-7 ° dH, if technically possible, blended. If the water is even softer, it can become corrosive and thus pose a problem for the installations. Moreover, it does not taste that good either. Construction of water softening systems WatPass® A cabinet housing with removable lid, in which a GFK pressure bottle (filled with ion exchange resin) sits, form the basis for the extremely low-maintenance Clack control valve with color display and German operation. This is a real innovation and makes the handling of the system a lot easier. The system is of course volume controlled. The innovative valve can be disassembled and maintained completely without tools. Regeneration - what is it? If the pre-set volume of soft water flow is reached, regeneration of the resin will be triggered at 2:00 am. A reserve capacity is programmed by us as a safety factor in the unit, so that lime-free water is available after the pre-set water capacity has been reached, until regeneration. During regeneration, the water softener automatically routes saline (sodium chloride) through the ion-exchange resin. In this process, the resin is again afflicted with sodium ions (Na +). The calcium and magnesium ions (Ca2 + / Mg2 +) are derived with the saline solution via a separate drain port. Now the resin is ready to re-soften your drinking water. During regeneration, the WatPass® 6000 delivers untreated tap water, so that the water supply is given. In case of inactivity of the plant (eg vacation) a compulsory regeneration is triggered every 10 days to prevent the germination of the resin bed. How long does a filling of salt last? Depending on the water hardness and your water consumption, a filling is enough for about 3-4 months, then new salt must be refilled. The integrated safety float valve protects you from overflowing water System size 3-5 persons households The WatPass® Kalk 6000 water softening system consists of: A cabinet housing for a salt supply, depending on the required size of the system. A volume-controlled central control valve type Clack WS 1 CI, with English menu navigation and color display. Integrated in the system, a GRP pressure bottle filled with high quality ion exchange resin. The scope of delivery also includes a mounting block, a connection set & 2x 25 kg high quality salt tablets for the WatPass® water softening system. These consist of:      Mounting block 1 inch with intersection, sampling tap and bypass function      1x Hardness cutlery (2-pack), 2x reinforced hose 1 "with union nuts (length 1000mm (DIN) DVGW tested), 4x seals, 1x drain hose length 2.000mm, 1x overflow hose length 2.000mm, 1x hose clamp      2x 25 kg high quality salt trays Installation conditions for all plant sizes:     Drinking or raw water connection     Socket 230 V / 50 Hz     Waste water connection     Pressure reducer at> 6 bar     Domestic water filter at the entrance     Connection thread: 1 inch     frost-free installation site If you need a plumber, we can arrange for you a specialized specialist company for the area of Central Germany, where you usually get an appointment within 2-4 weeks. The costs are performance-related and are negotiated by you directly with the executive specialist. Details on the installation situation will be clarified in advance. We receive no commission for the mediation! Please contact us if this service is interesting for you. For the installations according to DVGW guidelines, a DVGW certified pipe separator is available on request (not required for own well). The plant is delivered by freight carrier. Please tell us when ordering necessarily a phone number under which you can be reached on delivery.    

Drinking water softening system in a cabinet housing with English menu navigation, color display for faster recognition of operating conditions & control head from Clack. NEW - Clack control head with German menu and color display. The color modes of the display make it easier to check the operating status (blue = everything is OK). If there is an error (red = malfunction), you can see it at a glance. The German menu makes setting up the system a lot easier. Other languages: English, French, Spanish, Polish. The WatPass® water softening systems are a real innovation. They work according to the ion exchange method. This procedure is the establishment test for water softening. Our systems are available in 2 variants: 1. Standard salting for normal households Best sensory result and adequate softening for the entire household. The WatPass® lime is particularly energy-saving! By salting the regenerating salt is used optimally. If you are using the system for technical applications, please note the following values ??when cutting. A perfect wash result for glasses is available at values ??of <150 µS / cm and for cutlery, the system should be set to <80 µS / cm. Your advantages: • no calcified heating rods & spray nozzles • better energy utilization of the devices 2. Swiss version For operation in Switzerland, the SVGW regulation must be observed. Therefore, the systems for Switzerland are supplied with nylon protective sock and silver resin. Otherwise, the system is designed as the standard version! Nylon protective stocking / fine salt: Normally, softening plants in Switzerland are used with fine salt instead of salt tablets. Water softening systems that we deliver to Switzerland are therefore equipped by us with a nylon protective stocking so that you can operate the softening systems with fine salt. As a result, a blocking of the salt in the system is excluded. Silver resin content (min 2%): The ion exchange resin must contain a minimum of 2% silver resin. Regeneration with ion exchange resin - how does it work? When hard water is passed over the resin, the calcium and magnesium ions (Ca2 + / Mg2 +) present in the water are exchanged for the sodium ions (Na +) present on the resin. The resin we use has a lifespan of over 20 years. Your advantages Softer water protects your installations, the heating system, washing machines and small appliances such as kettles and coffee machines. The limescale deposits on your shower enclosure, washbasins, toilets, etc. are greatly reduced. You can save significant amounts of detergent, soaps and shampoo and the water just tastes better. Especially tea lovers, coffee drinkers and ambitious home cooks will appreciate the result of softened water. Anyone who has used a water softening system would never want to do without it again. When does it make sense to use a water softening system? The DIN 1988-200 recommends in Table 6 above a hardness of 2.5 mol / m³ (14 ° dH) for drinking water cold hardness stabilization or softening. The water is not fully softened for drinking water purposes, but by means of the mounting block to a water hardness of about 6-7 ° dH, if technically possible, blended. If the water is even softer, it can become corrosive and thus pose a problem for the installations. Moreover, it does not taste that good either. Construction of water softening systems WatPass® A cabinet housing with removable lid, in which a GFK pressure bottle (filled with ion exchange resin) sits, form the basis for the extremely low-maintenance Clack control valve with color display and German operation. This is a real innovation and makes the handling of the system a lot easier. The system is of course volume controlled. The innovative valve can be disassembled and maintained completely without tools. Regeneration - what is it? If the pre-set volume of soft water flow is reached, regeneration of the resin will be triggered at 2:00 am. A reserve capacity is programmed by us as a safety factor in the unit, so that lime-free water is available after the pre-set water capacity has been reached, until regeneration. During regeneration, the water softener automatically routes saline (sodium chloride) through the ion-exchange resin. In this process, the resin is again afflicted with sodium ions (Na +). The calcium and magnesium ions (Ca2 + / Mg2 +) are derived with the saline solution via a separate drain port. Now the resin is ready to re-soften your drinking water. During regeneration, the WatPass® 6000 delivers untreated tap water, so that the water supply is given. In case of inactivity of the plant (eg vacation) a compulsory regeneration is triggered every 10 days to prevent the germination of the resin bed. How long does a filling of salt last? Depending on the water hardness and your water consumption, a filling is enough for about 3-4 months, then new salt must be refilled. The integrated safety float valve protects you from overflowing water System size and technical information Water softening system WatPass®-6000 with volume control Control valve: Clack WS 1 Cl IA with color display and German menu navigation (quantity-controlled) Capacity at 10 ° dH .: 6,000 ltr. Capacity at 15 ° dH .: 4.000 ltr. Capacity at 20 ° dH .: 3,000 ltr. Pressure Tank Type: 8x35 Resin content: 15 liters Salt consumption per regeneration approx .: 2,40 KG Regeneration duration: approx. 60 min Salt stock .: 70 KG Block dimension (HxWxD): 1,140 x 320 x 500 mm Weight: 25 Kg The WatPass® Kalk 6000 water softening system consists of: A cabinet housing for a salt supply. A volume-controlled central control valve type Clack WS 1 CI IA, with English menu navigation and color display. Integrated in the system, a GRP pressure bottle filled with high quality ion exchange resin. Installation conditions for all plant sizes:     Drinking or raw water connection     Socket 230 V / 50 Hz     Waste water connection     Pressure reducer at> 6 bar     Domestic water filter at the entrance     Connection thread: 1 inch     frost-free installation site If you need a plumber, we can arrange for you a specialized specialist company for the area of Central Germany, where you usually get an appointment within 2-4 weeks. The costs are performance-related and are negotiated by you directly with the executive specialist. Details on the installation situation will be clarified in advance. We receive no commission for the mediation! Please contact us if this service is interesting for you. For the installations according to DVGW guidelines, a DVGW certified pipe separator is available on request (not required for own well). The plant is delivered by freight carrier. Please tell us when ordering necessarily a phone number under which you can be reached on delivery.    

Ion exchange resin for the decalcifying cartridge (Article No .: 1083) Application: Water softening for drinking purposes (not for domestic hot water). Do not use with water below 6.5 pH. Description: Limescale removal by ion exchange Carbonate hardness is reduced. Can only be used in conjunction with decalcifying cartridge (Article No .: 1083). Dimension: 0.65 l, in the welding bag Power: Depending on the hardness of the source water, see operating instructions. Disposal after the end of service life in the household waste for reasons of hygiene, a change of at least half a year is recommended Resin color: light beige Flow: limitation to D = 1 l / min is recommended; higher flow rates are possible, but reduce the withdrawal rate Flow limitation via the setting of the ball valve (see operating instructions) or via a flow regulator (see spare parts & accessories) the pH of the filtered water drops slightly, so please do not use at pH values below 6.5 Notice: The consumption period entered on the cardboard sticker corresponds to a minimum shelf life. It is generally indicated to 6 months after bottling and ensures that the granules do not dry out (dehydration). The storage of larger quantities of refill packs therefore makes no sense. The granules are still fully effective after the deadline when it is slightly humid (such as moist soil). A return after the end of the consumption period is not possible. Use only with cold water. Protect from frost.