Water Filtration Systems for Optimal Water Quality

Total Hardness Test set for easy determination of German water hardness ° dH. Accurate measurement with simple titration method. If the indicator solution drips in 5 ml of your test water until it changes color, the water hardness ° dH can be determined very simply and exactly. Applicable for checking the function of hardening plants or decalcifying plants. Naturally also for softening cartridges or all other areas of application for which you want to quickly and easily determine the water hardness down to one degree of accuracy. Prior knowledge by the user is not required. Have fun with determining your water hardness!

  Disruptor Camper water filter for van | campervan | overlander and caravan protects against viruses, legionella, cysts & bacteria ... The filter can be perfectly connected to Gardena or other compatible manufacturers with the included 1/2” male tap connector and 1/2 ” female tap connector. Ideal for use as a pre-filter when filling the fresh water tank. Can also be used downstream of a pressure pump in the tank or a crane pump. The water filter with the patented Ahlstrom Disruptor fleece filters effectively: Viruses (99.99%) Bacteria (99.999%) Cysts (99.95%) microplastics and many chemicals based on the proven and patented filter material from Ahlstrom Disruptor® The Disruptor water filter is the ideal addition when using filter systems that do not allow bacteria to be retained by themselves. Thanks to the practical 1/2” IG/AG threaded connection, it can be used with the appropriate adapters in many other installation situations to provide reliable protection against bacterial contamination. The high water flow rate of 12 l/min is particularly noteworthy for showers, as commercially available shower filters are often only half this capacity or less. Note: As a lot of water is used when showering, the capacity of the filter must be taken into account. The capacity is approx. 3000 liters. Recommended filter replacement every 6 months or earlier if necessary.

The parts of this maintenance set, which is suitable for all soft water systems of the SYR LEX Plus 10 series, should be replaced every 24 months during maintenance. It contains the following, original, components: • Seal set • Chlorine cell

Whether you're on an expedition or on a tour, even if you just want to take care of emergency situations at home or filter your tap water: With the LifeSaver® Cube you can always produce pure drinking water. The easy-to-transport 5-liter filtration system was developed in collaboration with the international NGO Oxfam to provide for both individuals and groups who have no access to clean tap water. But with the LifeSaver® Cube, you can also collect and store water from dodgy sources for filtering when needed. The LifeSaver® Cube sets itself apart from all other water filters on the market. Why? It is compact, affordable and reliably filters chlorine, particulate matter, cysts, bacteria and even viruses out of the water. Due to the exchangeable activated carbon block, it removes taste from the water. With the Lifesaver Cube you can safely drink water from almost any source of water after filtering. For this reason, the filter is also ideal for crisis operations or if your water supplier has problems with germs in the water. You can then simply save the decoction of the drinking water! The filter technology used has been used by aid organizations and the military for many years. So in our opinion, it just belongs in every household. Pump - Drink The operation of the filter is extremely simple, even if you want to filter larger quantities succeeds in no time. Advantages of the LifeSaver® Cube     BPA & BPS free     on NSF Protocol 231 standard tested by an independent laboratory     No batteries, chemicals, pump tips and other accessories needed     effective against cysts (99.99%), bacteria (99.9999%), viruses (99.9999%)     optimizes the taste because it filters chlorine, flavors and odors (activated carbon block)     The pump is also ideal for filling external bottles and containers     high throughput (up to 1.25 l / min)     Filtering up to 5000 l ** of water with a membrane filter (bacteria, viruses & cysts)     without volume measurement, waiting times or aftertaste such. B. in the use of chlorine or chlorine dioxide     works completely self-sufficient without electricity, chemicals or UV light     suitable for private households, families, individuals, mobile groups, aid organizations and communities     ideal for outdoor activities as well as disaster and emergency situations     great value for money Advantage of activated carbon block The activated charcoal block, serves mainly to improve the taste of the water and should be replaced approximately every 100l or 2 months. Of course you can also operate the filter without the activated carbon block. Efficiency filtration The tests were performed on the basis of the complete microbiological performance requirements of NSF / ANSI P231. It is good to know that Lifesaver has not only focused on the minimum of water filtration. The LifeSaver® Cube Water Purifier exceeds the EPA guidelines for microbiological water purifiers.     Retention bacteria ***> 99.9999% (Log 6)    Retention Viruses ***> 99.999% (Log 5)    Retention Cysts ***> 99.99% (Log 4) Failsafe ™ technology The LifeSaver® Cube has a mechanism that prevents you from getting inadequate filtered water from the filter. When the cartridge has reached the end of its life, the pores in the membranes are clogged with dirt and the filter will not let water through. The filter change announces itself by less and less water flows and the pumping becomes more and more laborious. As soon as no more water runs through the filter you have to change it. You can always be sure that your water filter is effectively filtering contaminants out of the water, and you know when to change or clean the cartridge. Important notes on use and storage Unused, the filter cartridges can be stored for at least 3 years without concern. Already used cartridges can be stored according to the manufacturer's instructions for up to 3 years. If you want to play it safe, however, we recommend that you do not store a used cartouche for more than a year. Please do not let the filter cartridge dry out after first use! Caution - a wet or damp filter should never freeze. Delivery includes: LifeSaver® Cube (for 5,000 liters of filtered water), 1 x carbon active filter, 1 x maintenance kit (1 filter protection cap and 5 spare O-rings) ** Flow rate and filter performance depend on the composition, temperature and turbidity of the water being fed*** Tested by BCS, released on 20.05.2017. Meets the full performance requirements of NSF / ANSI P231 protocol

Particularly compact Shower water filter QW for protection against legionella from the well-known German quality manufacturer Carbonit. The filter is designed for use in drinking water. It is very easy to connect to your standard shower fitting with external thread (1/2") inch. It is simply screwed between the hose and the fitting or between the hose and the shower (1/2" internal thread / 1/2" external thread) and it is ready for use and protects you safely against legionella. The housing is made of robust chrome-plated copper and is therefore not comparable with the shower filters commonly available on the market, which are made of plastic. Therefore, you also have a sustainable solution here, as the housing can accompany you for a long time. Due to its compact size, it has a service life of about 200 showers. After that, the filter should be replaced. Please note that the water flow rate of approx. 6l/min (at 2 bar) is quite high for such a filter, but can slightly reduce the usual water pressure. Scope of delivery: Complete filter housing with standard 1/2" connections, a membrane cartridge is included in the housing.

The famous water filter system- inexpensive, quickly installed, handy, flexible and 100 % CARBONIT® quality. Point-of-Use (POU) System as a countertop connected to tap faucet. Placed on a counter and connected by tubing to an existing kitchen sink tap. Clean water from the waterworks travels a long way until it reaches your household. Thus its quality diminishes through interaction with the external service system and especially yours internal house installation. The water often is contaminated with unwanted substances that are not restricted by law at this point. These substances include possibly medical residues, polar pesticides and fibres of asbestos. To make sure you should consuming only the purest water we have developed our CARBONIT® Premium Drinking Water Filters. They  reduce the amount of unwanted substances and improve the taste and smell of your tap water. The filter system does not remove beneficial minerals. If the small lever (diverter) is shifted to the side, the tap water is routed through the "Sanuno" filter system. This water is recommended as drinking water or for tea, or all other ways of human consumptions. Don´t forget your pets :-). Usable even with high concentration levels of lead and copper. Using the direct passage (by not shifting the lever) normal unfiltered water is provided for washing the dishes, for example. Do not use behind a depressurized storage water heater. Do not attach to a spray hose tap with shower hose. Operate only with cold water! The housing is made out of Polypropylen. In line with current good practice and epdwa Guidelines. The filter cartridges should be changed every 6 months. Scope of Supply Complete filter device with connection hose and special deflector valve with adapter for internal thread. A CARBONIT® Monoblock NFP Premium filter cartridge (SANUNO Classic) is included. Use instructions Connection to standard kitchen tap with external thread (M22x1) with the included special diverter valve (an adapter for valves with internal thread M24x1 is also included) Non-behind-pressurized boilers operate! Do not connect to a shower tap! Operate only with cold water ! Protect from frost.

The intelligent automatic system of the SYR LEX Plus 10 Connect S ensures that saving salt does not waste a bit of salt and regeneration only takes place when it is needed. The entire system is automatically disinfected each time. For more convenient maintenance or longer periods of absence (such as holidays), the water softener can be easily bridged if necessary without interruption. The plant is optimally suitable for single-family homes up to 6 persons. With the system, a single-family household can save a few hundred euros a year. You will save cleaning agents, detergents, shower gel, hair shampoo, decalcifier for household appliances and, of course, maintenance costs for electrical appliances and installations in your household. Lime settles in pipes or household appliances, as stubborn limestone. This can lead over time to constrictions of the water pipes, to blown heating coils of washing machines and dishwashers, defective water heaters or leaking boilers. Of course, there is no need for hours of cleaning of calcified shower walls, shower cubicles, bathtubs, toilets and sinks. Outstanding is the operating concept of the system with a colored, self-explanatory touch display. The highlight, however, is the control of the system with the SYR Connect APP (available free in the APP Store and on Google Play) which receives updates again and again. So you always know what is going on with your system and can also control your water consumption through the system. Your water feels noticeably softer. Coffee, tea and your food simply taste better by enhancing the water! The advantages of the SYR LEX Plus 10 Connect S:     DVGW certified *, complies with all directives     very low environmentally friendly salt consumption per regeneration     Installation with torsion-free flexible hoses in the plug-in system     Consumption-dependent, water-saving regeneration     Large softening column     automatic disinfection     small space requirement due to compact design     easiest operation by colored Touchdsiplay     Control and operation via SYR Connect APP     Illuminated salt container for easy, quick visual inspection     high throughput     Single column system (saves money and is robust)     Made in Germany     protects against problems with lime in the lines and devices     saves energy     automatic control Components and design The functional parts of the system are made of the highest quality plastic. The housing parts are made of impact-resistant thermoplastic, the rubber parts of age-resistant, durable elastomers. All other functional parts use low-lead, dezincification-resistant brass alloy and stainless steel. The materials used comply with the recognized rules of technology. The plastic parts and elastomers touched by the water comply with the KTW guideline issued by the Federal Environmental Agency. Installation A bypass and blending valve is already included in the delivery. If you already have a drinking water filter from the system DRUFI at the house connection, the connection is extremely easy. There must then be no installation work on the water-bearing system! The decalcification system is then simply screwed into the sandwich (see Figure 2) - DONE! The result is two fittings, a compact filter and softening unit. And that's how easy it is Disconnect the DRUFI, flange the connection fitting with integrated blending device, refit the DRUFI and connect the two hoses of the LEX Plus 10 Connect, no additional flange is required. Installation place The water softening system is installed centrally behind the water meter system. In order to avoid malfunctions, the water softening system is effectively protected by the connection of a drinking water filter (System Drufi). From a pressure of 5 bar, a pressure reducer must be connected in advance. The water to be softened must be clear, free of solid impurities and free of iron and manganese (TWVO values). Maintenance Since the water softener works automatically, you only have to refill salt regularly. In accordance with DIN EN 806, Part 5, maintenance must be carried out at least once a year. A maintenance contract by the specialized trade permanently establishes the safe operation function. We will gladly give you more information in a consultation. Some tips from our side: Please clean the salt container of incrustations at regular intervals and use only high quality salt. According to the Drinking Water Ordinance, regeneration salt in Germany must comply with the purity requirements of: DIN EN 973 Table 1 / Type A / Table 3. These are the most frequent causes of faults in water softening systems and are easy to avoid. This will prevent unnecessary, not insignificant costs that may arise through an installer or the factory customer service! Paid installation service by factory customer service or specialized specialist company: For the area of ??Central Germany we can arrange for a specialized company, where you usually get an appointment within 2-4 weeks. The costs are performance-related and are negotiated directly with the executing specialist. Details on the installation situation will be clarified in advance. We receive no commission for the mediation! Alternatively and optionally, the Werkskundienst undertakes this work. We are happy to make the contact. Please contact us if this service is interesting for you. Warranty and guarantee In compliance with the DIN EN 806, Part 5 and the installation by a Santärfachbetrieb the warranty and warranty on the system is 24 months. If you conclude a maintenance contract, the warranty may be extended to up to 5 years (as the manufacturer is a member of zvshk and is listed there as a handyman brand). You will find more about this on page 21 of the manual in the download area (see below). Scope of delivery 1x cabinet with salt container, 1x blending valve with flange connection incl. closing flap, 4x screws M6 x 70, 4x safety clamps for connection hoses, 2x connection hoses (length 700mm), 1x rinsing water hose 2m (12x16mm), 3x hose clamp, 1x tension clamp, 1x power plug, 1x drain funnel, 1x hardness measuring set Note: The item we delivered to avoid transport damage by freight carrier. * The DVGW - German association of gas and water specialist - stands for the technical self-administration in the gas and water sector. Its technical regulations are the basis for safety and reliability in the German gas and water supply. A DVGW certification is the reliable proof of compliance with the recognized rules of technology. The softening system Delfin has been certified DVGW. This certificate does not have a lot of equipment, and the dolphin is even licensed for rental or commercial use.

The SYR Drufi + DFR is a combination of fittings, specially developed for house entrance installation in accordance with DIN 1988, consisting of a semi-automatic backwash filter in accordance with DIN EN 13443-1 and a pressure reducer in accordance with DIN EN 1567. The Drufi + DFR combines the latest technology and the highest quality workmanship. Connected to a DN 50 drainage pipe, the integrated funnel directs the backwash water into the sewage system. Since the Drufi + DFR is equipped with a display ring for maintenance reminders according to DIN 1988, you always have the next backwash in view. In the case of the Drufi + DFR valve combination, the correct installation sequence according to DIN 1988 is observed. The Drufi flange program is used for installation in the pipeline. The flanges can be installed in vertical and horizontal lines. The built-in pressure reducer enables individual pressure setting and completes the excellent properties in the smallest of spaces. The Drufi + DFR consists of a mechanically acting, semi-automatic backwash filter. In addition, it is equipped with a flange seal, hexagon socket screws for flange mounting and an assembly key for the hexagon socket screws. The pressure reducer insert is set at the factory to 4 bar output pressure, whereby the external adjustment handle allows an individual pressure setting between 1.5 and 6 bar. An outlet pressure manometer is also part of the equipment of the Drufi + DFR. The filter cup is made of high quality plastic. The housing and the internal plastic parts are made of impact-resistant thermoplastic, the rubber parts are made of age-resistant elastomers. A low-lead, dezincification-resistant gunmetal alloy or stainless steel is used for all other functional parts. The ring seals used are made of asbestos-free fibers. All materials correspond to the recognized rules of technology. The plastic parts and elastomers that come into contact with water correspond to the KTW guideline of the Federal Environment Agency. The advantages at a glance • prevents pitting and corrosion • high flow rate • Backwash system with strong effectiveness • Control elements marked yellow • Practical slide ring for maintenance reminders • UV protection against germs • Reminder function for backwashing through maintenance display • Accessories: RSA automatic backwashing system, can be retrofitted without tools • DVGW-tested security Our recommendation Be sure to order the SYR connection flange DN 20 to 32 if you do not already have it.

Whether you're on an expedition or on a tour, even if you just want to take care of emergency situations at home or to filter your tap water: With the LifeSaver® JerryCan 20.000 you can always produce pure drinking water. The easy-to-transport 18.5 liter filtration system was developed in collaboration with the international NGO Oxfam to provide for both individuals and groups who lack access to clean tap water. But with the LifeSaver® JerryCan 20.000, you can also collect and store water from diphasic sources, then filter it when needed. The LifeSaver® JerryCan 20.000 stands out from any other water filter on the market. Why? It is compact, affordable and reliably filters chlorine, particulate matter, cysts, bacteria and even viruses out of the water. Due to the exchangeable activated carbon block, it removes taste from the water. With the Lifesaver JerryCan 20.000 you can safely drink water from almost any source of water, after filtering. For this reason, the filter is also ideal for crisis operations or if your water supplier has problems with germs in the water. You can then save the decoction of the drinking water easy! The filter technology used has been used by aid organizations and the military for many years. So in our opinion, it just belongs in every household. Pump - Drink The operation of the filter is extremely simple, even if you want to filter larger quantities succeeds in no time. Benefits of the LifeSaver® JerryCan 20.000     BPA & BPS free     complies with NSF protocol P248 for Military Operations Standard tested by US Military (MEDCOM)     No batteries, chemicals, pump tips and other accessories needed     filters at least: cysts (Log 3 (99.9%)), bacteria (Log 6 (99.9999%)) & viruses (Log 4 (99.99%))     optimizes the taste because it filters chlorine, flavors and odors (activated carbon block)     The pump is also ideal for filling external bottles and containers     high throughput (up to 4.0 l / min)     Filtering of up to 20.000 l ** of water with a membrane filter (bacteria, viruses & cysts)     without volume measurement, waiting times or aftertaste such e.g. in the use of chlorine or chlorine dioxide     works completely self-sufficient without electricity, chemicals or UV light     suitable for private households, families, individuals, mobile groups, aid organizations and communities     ideal for outdoor activities as well as disaster and emergency situations     great value for money Advantage of activated carbon block The activated charcoal block, serves mainly to improve the taste of the water and should be replaced approximately every 100l or 2 months. Of course you can also operate the filter without the activated carbon block. Efficiency filtration The tests were performed on the basis of the complete microbiological performance requirements of NSF P248. It is good to know that Lifesaver has not only focused on the minimum of water filtration. The LifeSaver® JerryCan 20.000 water filter exceeds the EPA guidelines for microbiological water purifiers. Failsafe ™ technology The LifeSaver® JerryCan 20.000 has a mechanism that prevents you from getting inadequate filtered water from the filter. When the cartridge has reached the end of its life, the pores in the membranes are clogged with dirt and the filter will not let water through. The filter change announces itself by less and less water flows and the pumping becomes more and more laborious. As soon as no more water runs through the filter you have to change it. You can therefore always be sure that your water filter effectively filters out impurities from the water, and knows when the cartridge must be replaced or cleaned. Important notes on use and storage Unused, the filter cartridges can be stored for at least 3 years without concern. Already used cartridges can be stored according to the manufacturer's instructions for up to 3 years. If you want to play it safe, however, we recommend that you do not store a used cartouche for more than a year. Please do not let the filter cartridge dry out after first use! Caution - a wet or damp filter should never freeze. Includes: LifeSaver® JerryCan 20.000 (for up to 20.000 liters of filtered water), 1 x carbon active filter ** Flow rate and filter performance depend on the composition, temperature and turbidity of the water being fed*** Tested by US Military, released on 21.12.2018. Meets the full performance requirements of NSF P248 protocol

The assembly block is suitable for the AquaAvanti IronGo iron filter and manganese filter AquaAvanti ManganGo or where a bypass is needed. If there is limited space at the point of connection, the use of a mounting block is ideal. For safety reasons, it may be desirable to be able to bridge the device unit. For such cases, the mounting block (bypass) is ideal. The installation of a mounting block usually takes about one hour. Your installer will surely make you an offer. If you are not sure if you need a mounting block just ask him. The mounting block is working that way Position 1 When the two outer taps are closed and the middle tap is open, the water flows past the connected device (eg AquaAvanti Iron GO or AquaAvanti ManganGo). Position 2 If the two outer cocks are open and the middle closed, all the water flows through the connected devices. Note: If it is necessary to bridge the units, simply return the mounting block to position 1.

Universal flange DN 25 from SYR If you do not yet have a suitable flange for the system, you will need this component to connect your SYR LEX PLUS 10 Connect soft water system. This flange is suitable for DRUFI +, IT 3000, IT 4000, LEX Connect individual softening systems 10 to 30, Safe-T and Safe-T Connect as well as other SYR articles. The housing is made of pressed brass and has screw connections on both sides. The installation position can be designed as desired. It is best to order the flange at the same time when you decide on a water softener from SYR.

Replacement filter for the Showerfilter QW for protection against legionella from the well-known German quality manufacturer Carbonit. The filter is designed for use in drinking water. Simply unscrew the filter housing, replace the filter, screw it shut and your shower filter is ready for use again for the next 3 months and protects you safely against legionella. The service life is about 200 showers. After that, the filter should be replaced. Please note that the water flow rate of approx. 6 l/min (at 2 bar) is quite high for such a filter, but can slightly reduce the usual water pressure. Scope of delivery: One membrane cartridge

Teamwork for your water security: The Safetech Connect leak protection continuously monitors your drinking water, determines the water hardness and offers a self-learning phase. The best thing about the SafeTech Connect leak protection: If it is installed in combination with the SYR SafeFloor floor sensors, the leak protection prevents water damage by automatically shutting off the main water line after a warning from the sensors. SafeTech Connect leak protection • intelligent self-learning phase • determines the water hardness, measures water pressure and water temperature • Several user profiles can be set • Can be linked to the SafeFloor Connect and LEX Plus 10 or LEX Plus 10 S Connect Advantages of the SafeTech Connects & SafeFloor Sensor: • integrated WLAN • Control and monitoring via the SYR app • E-mail notifications in online mode • Early detection and prevention of water damage

The intelligent automatic system of the SYR LEX Plus 10 SL Connect ensures that no salt is wasted through economy salting and regeneration only takes place when it is necessary. The entire system is automatically disinfected each time. The highlight of the model variant SL is the fully integrated leakage protection, which can protect you from the consequences of expensive water damage. The leakage protection and the SYR soft water system interact with each other. If your LEX Plus 10 SL Connect requires water for regeneration, it is reported to the leak protection system, which then releases the appropriate amount of water. For non-integrated solutions, this could potentially trigger a leak alarm. Not so with the SYR system, so you do not have to do anything during the rain! For more convenient maintenance or longer periods of absence (eg holidays), the water softener can be bypassed without interruption, if necessary. The plant is optimally suitable for single-family homes up to 6 persons. With the system, a single-family household can save a few hundred euros a year. You save detergents, detergents, shower gel, hair shampoo, decalcifier for household appliances and additional maintenance costs for electrical appliances and installations in your household. Lime settles in pipes or household appliances, as stubborn limestone. This can lead over time to constrictions of the water pipes, to blown heating coils of washing machines and dishwashers, defective water heaters or leaking boilers. In addition, there is no need for hours of cleaning of calcified shower walls, shower cubicles, bathtubs, toilets and sinks. Outstanding is the operating concept of the system with a colored, self-explanatory touch display. The highlight, however, is the digital control option of the system with the SYR Connect APP (available free of charge in the APP Store and on Google Play), which receives frequent updates. So you always know what's going on with your system and can also control your water consumption through the system. Your water feels noticeably softer. Coffee, tea and food taste better by softening the water! The advantages of the SYR LEX Plus 10 SL Connect:     DVGW certified *     Leakage protection fully integrated     License for rental and commercial use     very low environmentally friendly salt consumption per regeneration     Installation with torsion-free flexible hoses in the plug-in system     Consumption-dependent, water-saving regeneration     big softening column     automatic disinfection     small space requirement due to compact design     easiest operation by colored Touchdsiplay     Control and operation via SYR Connect APP     illuminated salt container for easy, quick visual inspection     high throughput     cost-minimizing, robust single column system     Made in Germany     nationwide customer service or maintenance by a trained specialist     protects against Kalkinfarkt of lines and devices     saves energy     automatic control   Components and design The functional parts of the system are made of the highest quality plastic. The housing parts are made of impact-resistant thermoplastic, the rubber parts of age-resistant, durable elastomers. All other functional parts use a low-lead, dezincification-resistant brass alloy and stainless steel. The materials used comply with the recognized rules of technology. The plastic parts and elastomers touched by the water comply with the KTW guideline issued by the Federal Environmental Agency. Installation A bypass and blending valve is already included in the delivery. If you already have a drinking water filter from the system DRUFI at the house connection, the connection is extremely easy. There must then be no installation work on the water-bearing system! The decalcification system is then simply screwed into the sandwich (see Figure 2) - DONE! The result is two fittings, a compact filter and softening unit. And that's how easy it is Disconnect the DRUFI, flange the connection fitting with integrated trimming device, refit the DRUFI and connect the two hoses of the LEX Plus 10 SL Connect, no additional flange is required. Installation place The water softening system is installed centrally behind the water meter system. In order to avoid malfunctions, the water softening system is effectively protected by the connection of a drinking water filter (System Drufi). From a pressure of 5 bar, a pressure reducer must be connected in advance. The water to be softened must be clear, free of solid impurities and free of iron and manganese (TWVO values). Installation, Maintenance & Commissioning Since the water softener works automatically, you only have to refill salt regularly. In accordance with DIN EN 806, Part 5, maintenance must be carried out at least once a year. A maintenance contract by the specialized trade permanently produces the safe operation function. We would like to explain more about this in a consultation. Some tips from our side: Please clean the salt container of incrustations at regular intervals and use only high quality salt. According to the Drinking Water Ordinance, regeneration salt in Germany must comply with the purity requirements of: DIN EN 973 Table 1 / Type A / Table 3. These are the most frequent causes of faults in water softening systems and are easy to avoid. This will prevent unnecessary, not insignificant costs that may arise through an installer or the factory customer service! Paid installation service by a specialized specialist: For the area of ??Central Germany, we can arrange a specialized company, where you usually get an appointment within 2-4 weeks. The costs are performance-related and are negotiated directly with the executing specialist. Details on the installation situation will be clarified in advance. We receive no commission for the mediation! Alternatively and optionally, the Werkskundienst undertakes this work. We are happy to make the contact. Please contact us if this service is interesting for you. Warranty and guarantee In compliance with the DIN EN 806, Part 5 and the installation by a sanitary specialist company, the guarantee and warranty on the system is 24 months. If you conclude a maintenance contract, the warranty may be extended to up to 5 years (as the manufacturer is a member of zvshk and is listed there as a handyman brand). You will find more about this on page 21 of the manual in the download area (see below). Scope of delivery 1x cabinet with salt container, 1x blending valve with flange connection incl. closing flap, 4x screws M6 x 70, 4x safety clamps for connection hoses, 2x connection hoses (length 700mm), 1x rinsing water hose 2m (12x16mm), 3x hose clamp, 1x tension clamp, 1x power plug, 1x drain funnel, 1x hardness measuring set Note: The item we delivered to avoid transport damage by freight carrier. * The DVGW - German association of gas and water specialist - stands for the technical self-administration in the gas and water sector. Its technical regulations are the basis for safety and reliability in the German gas and water supply. A DVGW certification is the reliable proof of compliance with the recognized rules of technology. The SYR LEX Plus 10 SL Connect water softener has been DVGW certified. This certificate does not have many devices, and the SYR LEX Plus 10 SL Connect is even licensed for rental or professional use.

We offer you a LifeSaver® JerryCan shower with hose & adapter for the LifeSaver® JerryCan 10,000 or 20,000. If a shower with a flexible hose increases your comfort in rough conditions, then this is the right solution for you. Info about the filter system Whether you are on a tour or if you just want to prepare for emergency situations at home, with the LifeSaver® JerryCan 20,000 you can always produce pure drinking water. The easily transportable 18.5 liter filter system was developed in collaboration with the international NGO Oxfam to cater to both individuals and groups who do not have access to clean tap water. With the LifeSaver® JerryCan 10,000 & 20,000 you can collect and store water from dubious sources in order to filter it when it is needed.

This flexible “single stage” drinking water filter system offering, is easy to install at an affordable price. Simple installation, either with a not included special tap, which is small and elegant. We guarantee CARBONIT® quality of all the tap water coming out of your faucet. The hardware is kept out of sight under the basin. Water filtration in the kitchen for yielding filtered drinking water, usable even with high concentration levels of lead and copper, Pesticides or limescale …. (depending from the filter cartridge you choose). You´ll get clean and fresh water which is very suitable for the preparation of beverages, water for cooking, etc. The device is made for installation under the basin between a corner valve and the existing water tap. The VARIO-HP is although possible to installed between the corner valve and the existing faucet fixture. Scope of supply: Complete filter device with comprehensive installation material and a water filter cartridge of your choice (depending on what you need and what you like to have).   Available filter cartridges NFP Premium We recommend the use of the NFP Premium Drinking Water Cartridge for removing buildups of such substances in domestic pipe lines as lead and copper. This filter cartridge is utilised in all CARBONIT® Drinking Water Filters, due to its high performance capability in the face of possible drinking water contaminants and the excellence of its hygienic characteristics. Service life: The filter cartridge must be replaced after 6 months (in accordance with DIN 1988). As a basic rule, 10,000 liters of water can be filtered within a six-month period. Earlier replacement can however be necessary when the water flow becomes noticeably reduced. Earlier replacement is not the result of any deficiency in the filter used, but rather a sign of the increased presence of fine particles in unfiltered water. Filter fineness: approx. 0.45 µm Flow: approx. 2 liters per minute (depending on water pressure). For technical reasons, only for use with cold water, protect from freezing IPF Puro Combined cartridge of activated carbon and axially integrated capillary membrane. Awarded the Innovation Prize of Saxony-Anhalt in 2002. This filter cartridge is recommended for low water pressure or when it´s necessary to get 6-8l / min. Activated carbon has a large surface that under the adsorbent used in the chemical, medicine and water and wastewater treatment. As sintered activated carbon block filter in accordance with scientifically verified CARBONIT® technology removes unwanted primarily the color, taste and odor compounds from gases, vapors and liquids unparalleled filtration results scientifically verified. Membrane filtration for reliable retention of pathogenic germs. We filter in the field of micro-filtration. Please note laid down by the legislature semiannual filter change (backwash filter must be flushed every 2 months). Filter performance: Combination of two technologies for high water flow in special applications (medical, water dispensers). Hospital Hygienist document as Legionella, Pseudomonas, and fungi (eg. Aspergillus) the tap water can be a source of transmission. Scientific studies of the Institute of Hygiene and Public Health, University of Bonn show that these stresses can occur not only in hospitals but also in the home environment. Here immune-compromised Individuals terminal Filters are primarily a risk offer protection. Filtration capacity of about 5,000 liters. Scientifically checked filter composition. For the filtration of bacteria and organic substances. Meets ANSI / NSF Standard 53 (cyst & turbidity reduction) and EPA standards. The epdwa guidelines for a filter fineness of at least 1 micron (1 micron) in nominal terms and a recommended filter change every 6 months are observed. Everything for your safety! About technical reasons is only for use with cold water allowed, protect from frost. Recommended filter change every 6 months. IFP KDF Recommended for water filtration in the kitchen and bathroom at the point of use, especially at high heavy metal loads (lead, copper, iron, nickel, chromium, cadmium, aluminum, mercury, arsenic, zinc retention up to 99%). It has antibacterial, fungicidal and algae protection and additionally reduces chlorine, chloroform, lindane, DDT, atrazine, drug residues and polar pesticides> 70%. Service life: The filter cartridge must be replaced after 6 months (according to DIN 1988). Basically, within the 6 months 10,000 liters of water may be filtered. Technical data: Filter fineness: approx. 1.5 µm, flow: approx. 1,5Liters per minute (depending on water pressure), temperature: Use only with cold water, protect against frost EM Puro This cartridge filter is especially manufactured for Prime Inventions on the basis of the two-stage IFP Puro. It combines the particular characteristics of a carbon block sediment filter with a microfiltration of 0.15 microns through the internal Capillary membrane. Even with a high contamination which may accumulate within the microorganism can be reliably retained but still leaves the minerals untouched. The EM Puro is ideal for low pressure and reduces the growth of bacteria. The capillary membrane Ster-OTap® is in accordance to the ANSI/NSF Standard 53 (Cyst and Turbidity reduction) The active carbon block has been tested and certified by the German food and law standard association and is also considered environmentally friendly from recycled resources. With the additional mixture of EM Ceramic powder it enhances the special characteristics within the cartridge filter, thus leaving the water tasting fresh and full-bodied for many of our users. Service life: The cartridge filter must be replaced after 6 months (according to DIN 1988). Basically, 5,000 liters of water must be filtered within 6 months. However, earlier change may be necessary if the water flow is noticeably reduced. Earlier replacement is not a defect of the filter used, but an indication of increased presence of fine particles in unfiltered water. Filtration rating: 0.15 microns (membrane) / 5 micron (activated carbon) Dimensions: Length 9 3/4 „, da = 70 mm Flow: about 6-8 liters per minute, dependent on the water pressure. For technical reasons, use only with cold water, protect from frost. EM Premium 5 Together with the proven filter performance of the CARBONIT® NFP Premium filter technology, the ideal water filtration results: EM Ceramic causes, among other things, a reduction of the surface tension of the water and the reduction of the cluster structures. As a result, most of the users find that the taste of the water has improved. The coconut-based activated carbon block filter focuses on the chemical-physical removal of undesirable ingredients in drinking water, eg. B. by the influences of the house installation. Service life: The filter cartridge must be replaced after 6 months (according to DIN 1988). Basically, within the 6 months 10,000 liters of water may be filtered.Technical data: Filter fineness: approx. 0.45 µm, flow rate: approx. 2 liters per minute (depending on water pressure), Temperature: Use only with cold water, protect against frostSediment Filter The filter is provided with antibacterial protection. Due to the special winding, the protection is distributed over a very large area. Upon contact of germs with the protective surface of their propagation process is interrupted. Textile coarse and prefilter e.g for removal of heavily particulate polluted or polluted (turbidity) input water. Service life: The filter cartridge must be replaced after 6 months (according to DIN 1988). Basically, within the 6 months 10,000 liters of water may be filtered.Technical data: Flow rate: approx. 20 liters per minute (depending on the water pressure) Use only with cold water, protect against frost Decalcification cartridge The decalcifying cartridge improves the taste of cold and hot drinks (especially to improve the aroma of coffee and tea) and protects household appliances from calcification. The flowed through ion exchange resin reduces the hardness of the water. Use: The water flow should not exceed about 2 l/min. so that a noticeable decalcification is guaranteed. The possible duration of use depends on the degree of hardness of the input water. Depending on the raw water hardness up to 1,900 l (degree of hardness 5-10 dh) or 450 l (degree of hardness 11-25 dh) can be achieved as static quantity. The granules in the cartridge can be replaced independently. The change is made when the typical features of the calf such as tea skin, aroma loss in tea / coffee or lime deposits on surfaces occur again. According to DIN 1988, a change of granules is required after 6 months at the latest. Here you will find the ion exchange resin for the granule change.Lime protection cartridge The flowed through catalyst granules works on the seed crystal principle. This precipitate lime is bound to the seed crystals and floats in the water with away. The procedure serves to protect the line and devices. Limescale deposits are easier to remove after use but lime removal does not take place. Use: The water flow should not exceed about 3 l / min.. When used with water in drinking water quality without coarse sediments, the catalyst granules maintaining about 3 years. Coarse impurities in the water can cause the surface of the granulate to clog and require rapid replacement.

Water filter Disruptor | Viruses, Legionella, Cysts & Bacteria ... Can be used for under-sink installation, as a shower filter, for motorhomes or for many other purposes. The filter is used as a stand-alone filter or as an extension to an existing filter system for the retention of viruses and bacteria. The water filter with the patented Ahlstrom Disruptor fleece filters effectively: Viruses (99.99%) bacteria (99.999%) Cysts (99.95%) microplastics and many chemicals based on the proven and patented filter material from Ahlstrom Disruptor ®. The installed Ahlstrom Disruptor® filter fleece is certified in accordance with ANSI/NSF 42 (02/29/2012). The Disruptor water filter is the ideal supplement when using filter systems that do not allow bacteria to be retained by themselves. Thanks to the practical 1/2’ IG/AG threaded connection, it can be used as a shower filter or with the appropriate adapters in many other installation situations to provide reliable protection against bacterial contamination. The high water flow rate of 12 litres/min is particularly noteworthy for showers, as commercially available shower filters are often only half that or less. Note: As a lot of water is used when showering, the capacity of the filter must be taken into account. The capacity is approx. 3000 litres. This corresponds to approx. 50 5-minute showers. It is also ideal when travelling to protect yourself from unpleasant surprises in the shower.

The Lifesaver JerryCan maintenance set / gasket set is compatible for all Lifesaver Jerrycan variants. This also means all sizes, such as the 10,000 and 20,000 variants. If your filter is getting on in years or has been used a lot, we recommend replacing the seals. If you are going on an expedition, it is of course also advisable to have a seal set with you in case of need.

Very high quality armored hose as 1 inch version with 1 x union nut (ÜM) and 1 x union nut (ÜM). The polyethylene (PE) hose has a flat seal and is DIN-DVGW tested. The connections are nickel-plated brass. The armored hose is of course suitable for drinking water installations and also for sanitary and water softening systems. The hose material is very flexible and has a high thermal resistance. The high-quality, flexible hose was produced with a drinking water approval (KTW A, W270, W543, DVGW) and is resistant to electrical corrosion. In addition, it has a vacuum resistance of up to 0.1 mbar, even with the smallest bending gradients and temperatures of up to + 80 ° C.

The WatPass® INOX countertop water filter is a feast for the eyes in the kitchen - new model with aerator - optimised for the connection of water swirlers, we supply it with an EM Premium 5 filter cartridge as a starter set. The WatPass® INOX has been designed without plastic as far as technically possible. It is therefore a clear recommendation for all people who are looking for a water filter that lasts an extremely long time and avoids plastic waste. The supplied changeover valve is simply screwed onto the tap and you can start tapping fresh, pure, filtered water. The valve allows you to easily switch between filtered water and service water. It could hardly be simpler! All standard filter cartridges from Carbonit and Prime Inventions, such as NFP Premium, EM Premium 5, IFP Puro, EM Puro, etc., fit into the WatPass® INOX. Special design elements are: the high-quality union nut and the stainless steel outlet pipe with aerator. All water-bearing housing parts are made of high-quality stainless steel that complies with the drinking water standard.  Special features Solid stainless steel housing Elaborately brushed surface (typical for stainless steel)  changeover valve made from high-quality stainless steel Easy to change filter cartridges thanks to easily rotatable union nut Easy to clean and hygienic surfaces stainless steel outlet pipe with outlet that is also suitable for connecting water swirlers High-quality silver-coloured silicone hose Good stability even with heavy water swirlers The WatPass INOX countertop filter housing is very easy and hygienic to clean thanks to its stainless steel upper and inner surfaces Information on the EM Premium 5 water filter cartridge from CARBONIT® included in the set The filter cartridges manufactured by CARBONIT® combine water filtration and improved water flavour. A special EM ceramic is added to the activated carbon filter during the sintering process. Among other things, this ceramic reduces the surface tension of the water and reduces the size of the cluster structures. As a result, most people describe the flavour of the water as softer or rounder. Together with the proven filter performance of CARBONIT® NFP Premium filter technology, this results in ideal water filtration. Activated carbon has a large surface area and is used as an adsorbent in the chemical, medical and water and waste water treatment industries, among others. It primarily removes undesirable colours, tastes and odours from gases, vapours and liquids. The sintered activated carbon block filter based on coconut focusses on the chemical-physical removal of undesirable substances in drinking water, e.g. due to the influences of domestic installations.  Service life: The filter cartridge must be replaced after 6 months (in accordance with DIN 1988). In principle, 10,000 litres of water may be filtered within the 6 months. However, an earlier change may be necessary if the water flow is noticeably reduced. An early change is not a defect in the filter used, but an indication of an increased occurrence of fine particles in the unfiltered water. Scope of delivery: Stainless steel housing, silicone hose, changeover valve, housing spanner, EM Premium 5 filter cartridge from Carbonit, sanitary silicone Note: Do not operate on "unpressurised boilers". Due to the design of the available filter cartridges, only operate with cold water.        

The WatPass® Resin Refresh concentrate reliably removes impurities of the resin of your soft water plant that could not be removed during regeneration. We recommend using the Resin Refresh cleaner every 12 months to ensure the function of your system and to remove stubborn impurities of the ion exchanger. Usage Simply add 10 ml of the concentrate per liter of softening resin to the brine shaft. (Example: For 10 liters of ion exchanger, use 100 ml of concentrate.)  

This personal outdoor and travel water filter sets it apart from any other water filter on the market. Why? It is small and affordable and filters out particulate matter, protozoa, bacteria and even viruses. In addition, it also reduces most chemicals. There is currently no other filter on the market that does so much than the Grayl GeoPress. With this compact companion you can safely drink from almost any source of water. Therefore, the filter is also ideal for crisis operations or if your water supplier has problems with germs in the water. The easiest and most comfortable operation is ensured by the use of SoftPress ™ ergonomic comfort pads for non-slip and fatigue-free pressing. The material TopoGrip ™ non-slip TPE ensures a good grip and a long durability of the filter on all heavily used surfaces. In our opinion, the Grayl GeoPress water filter is therefore easy in every household, because it saves money and waste and lets you travel sustainable. So you never have to buy mineral water for single use again. Filling - pressing - drinking The operation of the filter is very simple. The dirty water is poured into the "outer" bottle. Then the "inner" bottle is used, on the bottom of the filter cartridge is screwed. This bottle is then pressed down through the dirty water. Debris, chemicals and pathogens remain in the filter membrane and the inner bottle fills with clean water, which you can drink directly. With OnePress ™ Global Protection, travelers, adventurers and survivors can secure dodgy water sources and surface waters anywhere in the world.     BPA-free     No batteries, chemicals, pump tips and other accessories needed     Effective against protozoa (99.9999%), bacteria (99.9999%), viruses (99.9999%), including rotavirus, hepatitis A, norovirus, giardiasis, cryptosporidium, E. coli, cholera, salmonella, dysentery and more     Improves taste, smell and clarity of the water     filters microplastic as well as many chemicals and heavy metals     No sucking or squeezing the bottle necessary     Technology: ion exchange, ultrapulverized activated carbon     Easy filtering of up to 350 fillings (about 250 l)     Flow rate up to 5l / min.     Works optimally at pH values ??between 5 and 9.5 (in nature, there is hardly any water with a pH outside these limits.)     Tested to NSF standards (National Sanitation Foundation, USA) The new SimpleVent ™ Drink Cap has three functions:     vented during cleaning     protects against cross contamination and dirt     allows one-handed hydration through fast-flowing drinking spout Note on storage - unused, the filter cartridges can be stored for 10 years if properly stored. If you want to be on the safe side, however, we recommend that you do not use a used cartouche for more than a year. Please always dry well before storing! Important - a wet or damp filter should NEVER freeze. Origin: Engineered in the USAFilter housing Geopress: made in ChinaFilter cartridges GeoPress: made in USA

The German premium manufacturer Carbonit® offers with its SANUNO table top filters, water filter devices in absolute top quality. Therefore, it is nice that we can provide you here a praiseworthy, extremely practical and flexible usable device. The Sanuno can be combined with all suitable filter cartridges from Carbonit, Prime Inventions and Alvito. The extremely fast and easy connection, directly at the tap, characterizes these filter housings. By using a Sanuno table filter you get with the suitable filter cartridges from Carbonit, high-purity and fresh water for daily enjoyment. Since the Sanuno Basic is delivered without a filter cartridge, you can order a cartridge from our range of water filters according to your needs. The water filter cartridges can be found in our shop. Due to its compact design, it finds its place everywhere and quickly. Fields of application: Water filtration at the suitable tap for the production of pure and fresh drinking water. The filter can also be used at high lead and copper concentrations. It is ideally suited for the preparation of drinks, cooking water, ... Faucet-mounted device on the sink with special diverter valve for easy selection of filtered and unfiltered water. The housing is made of polypropylene. Scope of delivery: Complete filter unit with connection hose and special diverter valve with adapter for internal threads.

Effective leakage protection with smart internet app. Syr Safe Tech+ Connect leakage protection protects against leaks, minimizes water damage and prevents water waste. It monitors water consumption with state-of-the-art electronics. If the individual consumption values are exceeded, the Syr Safe Tech+ Connect leak protection shuts off the pipe system and sends an email or notifies them via SYR APP. With the free SYR App, the Syr Safe Tech Plus Connect can be viewed and controlled via smartphone/tablet. Why should I install such a system? Over 3,000 tap water damages occur in Germany - every day! The intelligent, internet-enabled Syr Safe Tech+ Connect leak protection offers reliable protection against the expensive consequences of water damage. This is how safe leakage protection works with the Syr Safe Tech Plus Connect leakage protection. The "SYR Syr Safe Tech Plus Connect Leak Protection" uses state-of-the-art electronics to monitor the current water consumption every second and compares the measured values with a setpoint. If the individual consumption values are exceeded, it immediately shuts off the pipe system. If the Syr Safe Tech Plus Connect leak protection is online, it notifies you by e-mail. In places where monitoring is particularly intensive, the SafeFloor Connect wireless floor sensor can also be used and linked to the system. This further increases safety many times over. Convenient features for operation and perfect control - the SYR App Once a project has been created on the SYR Connect server, the user has a full overview of the installation and access to important parameters. Via smartphone, tablet or PC, he can set leakage protection levels, operate presence or absence functions, manage the absence calendar and control linked SafeFloor Connect wireless floor sensors. Perfectly combinable The Syr Safe Tech+ Connect leak protection is installed on the SYR universal flange. It is therefore quite practical if the SYR DRUFI drinking water filter is already present: the Syr Safe Tech Plus Connect leak protection can then - without having to change the installation - simply be retrofitted. The advantages at a glance  integrated WLAN & LAN  intelligent self-learning phase  Control and monitoring via SYR App possible  push notifications/emails in online mode  vacation monitoring and special absence function  perfect combination with the SYR DRUFI: the SafeTech+ Connect fits between DRUFI and flange  can communicate with one or more SafeFloor Connect floor sensors  emergency stop function  in case of power failure emergency operation by battery  determines the hardness range of the water (conductivity), measures water pressure and water temperature  several user profiles adjustable Scope of delivery Electronic unit,  4 x Batterie (AA) 1,5 V, emergency open key, power adapter, commissioning manual, operation and maintenance manual Important: SYR connection flange must be ordered if not available, because it is not included in the delivery! Ask your insurance company, it can be worthwhile Many well-known insurers discount their premiums if a leakage protection is installed. Just ask and save additional money.