Well Plus Wateranalysis - pH value, water hardness, germs, iron, manganese, lead & other parameters

The WatPass ManganGo removes manganese and iron from your well water and thus reduces the orange-brown color of the water. It also reduces often occurring, unpleasant hydrogen sulfide and turbidity of the water. The system is almost maintenance free. It only needs to be refilled every 3-4 months of potassium permanganate to regenerate the catalyst granules in the additional container. Its performance* is outstanding, it can filter up to 4.8 mg / l of iron and up to 2 mg / l of manganese from the water. The installation is very easy. At free programmable time (about every 7 days), the concentrate is automatically disposed of through a spout. The system consists of a GRP pressure bottle filled with high-quality catalyst granules and a potassium permanganate reservoir (KMnO4), which is needed to regenerate the filter material. A quantity-controlled central control valve, type Clack WS 1 CI, currently represents the ultimate in the field of control valves for such systems. An additionally obtainable assembly block (bypass) serves to bridge, but is not absolutely necessary for operation, but it is recommended. Function of the special filter material The plant can filter iron, manganese and hydrogen sulfide from your well water in one go. The filter material is coated with manganese dioxide and acts as a catalyst. The manganese and iron present are oxidized by the catalyst granules and can be filtered in the then present form. The substances held in the filter bed are then removed from the device during the backwashing process. The filter granulate is supplied for technical reasons in the non-regenerated form. Therefore, it must be activated with a potassium permanganate solution during commissioning. The WatPass ManganGo is specially equipped for us with a second granulate, which also ensures that any remaining turbidity from your well water to remove. This is rarely found in the form. In order to be able to successfully filter manganese and iron, this is possible with the WP ManganGo even at a pH of at least 6.8. So in most cases, you do not have to install an additional pH enhancement device such as the WatPass phGo. Areas of application: Well water, garden irrigation, laundries, industrial water use, Koi and fish ponds and all areas where a high manganese and iron content in the water causes problems Depending on the desired performance, or the quantity of well water to be treated, the WatPass ManganGo is available in various versions. These can be found in the selection menu. Depending on the spatial conditions and equipment requirements, we recommend that you consider the purchase of the following accessories: Connection set 1 inch depending on system size 2x armored hose 1 inch ÜM x 1 inch ÜM, L = 1.000 mm; 1x drain hose, L = 2,000mm; 1x hose clamp 1/2 inch; 4x seals; 1x overflow hose, L = 2.000mm Connection set 1 1/4 inch depending on system size 2x armored hose 1 1/4 inch ÜM x 1 1/4 inch ÜM, L = 1.000 mm; 1x drain hose, L = 2,000mm; 1x hose clamp 1/2 inch; 1x overflow hose; L = 2.000mm; 4x seals Mounting block 1 inch IG x 1 inch AG with intersection, bypass function, sampling tap Installation instructions for connection to public networks: If the ManganGo filter systems are to be used in the drinking water sector, they must comply with the "Rules for drinking water installations" according to DIN 1988 -200 in conjunction with DIN EN 1717: 2011-08. Then it is necessary to install a backflow preventer to protect the public drinking water network. Necessary installation conditions: Water connection socket 230 V / 50 Hz, waste water connection, pressure reducer at> 6 bar Transport: The article is delivered to avoid transport damage by freight carrier. * The indicated filter capacities are max. achievable values ??under exactly analyzed conditions. A water analysis and determination of what the water should be used for is a basic requirement for good advice and the selection of the right filter system. Well water can be subject to variations in composition due to various environmental factors. Therefore, a regular analysis should take place to be able to adapt the filter devices by, for. B. the regeneration cycle is changed.

The WatPass® IronGo deferrisation system oxidises dissolved iron from your water. The Clack control head with German menu and colour display distinguishes this system from many other suppliers, as usually only monochrome, English-language versions are offered. The colour modes of the display make it easier to check the operating status (blue = everything is OK). If there is an error (red = fault), you can see this at a glance. The German menu makes setting the system much easier. Nothing needs to be changed or topped up. The IronGo is therefore virtually maintenance-free. Its performance is outstanding, it can filter up to 5 mg/l of iron from the water. Installation is very simple. Even during the backwash, water can be easily removed. At a freely programmable time (approximately every 7 days), the concentrate is automatically disposed of through an outlet. A 3 metre drain hose is supplied and can be replaced with a longer garden hose if necessary. An additional mounting block (accessory) can be purchased for bridging, but is not absolutely necessary for operation, although it is highly recommended. This helps to maintain the water supply with untreated water during maintenance work. The system consists of: GRP pressure bottle in various sizes (adapted to the capacity), which is filled with high-quality filter material. The catalyser granulate is coated with manganese dioxide (MnO2). Volume-controlled central control valve type Clack WS 1 CI IA. How the catalyst granulate works Iron is usually present as bicarbonate in groundwater.  Due to the excess carbonic acid, iron cannot be filtered. As a catalyser, the filter material causes the transition from soluble Fe2+ to insoluble Fe3+, the resulting oxidation product iron hydroxide is easily filterable. A pH value of at least 6.8 (preferably 7.0) is required to filter iron successfully, regardless of the filter material used. If the pH value of your water is too low, please contact us specifically. This must then be raised by additional filter technology as a first step. We then recommend the WatPass pHGO system. Necessary installation conditions: Water connection socket 230 V / 50 Hz, waste water connection, pressure reducer at > 6 bar Product Details Flexible, space-saving design Corrosion-resistant GRP pressure bottle High-quality filter material Computer-controlled Clack WS 1 CI IAValve Volume Control Extremely low maintenance Treatment of ferrous water Reduction of the orange-brown colour tone in the water Areas of application: Well water, garden irrigation, laundries, industrial water utilisation, koi and fish ponds and all areas where excessive iron content in the water causes problems The WatPass IronGo is available in different versions depending on the required performance or the amount of well water to be treated (the colour of the pressure bottle may differ in some versions). You can find these in the selection menu. Note: If the IronGo filter systems are to be used in the drinking water sector, they must comply with the ‘Rules for drinking water installations’ in accordance with DIN 1988 -200 in conjunction with DIN EN 1717:2011-08. It is then necessary to install a pipe separator to protect the public drinking water network.  

The Carbonit water filters QUADRO are made of stainless steel domestic water filter for the highest demands. An exceptionally high-quality workmanship paired with high throughput (4-cartridge device in parallel circuit) and little space you will not find a second time in the quality of our Martkenntniss. The QUADRO ensures that the water comes out of the tap just as clean as it is "sent on its way" by the water supplier. A house water filter keeps, possibly by working on the drinking water network, dissolved micro particles back. In addition, the precious wetness ages on its way through long distances and stagnation. The QUADRO is suitable for installation in the central water pipe after the water meter. The optionally available WFP filters extract especially chlorine, organic compounds and particles. Dirt filters according to DIN 19632 avoid the entry of foreign particles and thereby triggered trough and pitting corrosion (corrosion protection).The systems impress with a simple installation and the exceptional retention values ??make you to your insurance, in terms of hot water, in your house :-)By equipping with WFP Premium (20 µm filter fineness) or WFP Select (10 µm filter fineness) activated carbon cartridges manufactured by Carbonit in Germany, the system becomes an excellent filter for general soiling. In addition, the WFP Protect (5 µm filter fineness) results in a very good fine filtration. The WFP Premium (0.45 µm filter grade) has the same outstanding filtration performance as the well-known NFP Premium filter cartridge. The WFP Premium filters contaminants such as pesticides, chlorine, arsenic, heavy metals, drug residues, plasticizers and hormone-like substances. More information can be found in our blog under Test & Report.We recommend the Quadro with 10 or 20 µm cartridges as a pre-filter with the simultaneous use of ultrafine filters such as Sanuno, Mercuro, AquaAvanti Single, Vario HP at the water tap of your house. With the filter cartridges WFP Protect or WFP Premium it can be used as the finest filter for the whole house. Since the flow resistance of the WFP Premium is slightly reduced because of the high filter fineness, we definitely recommend using the Quadro 120 here.The Quadro from the German manufacturer Carbonit® is unrivaled in terms of quality and filtration performance to our knowledge. If you want premium quality, then the Quadro is our recommendation for you! For households up to three people, the Quadro 60 is the right choice, for higher needs, the Quadro 120 is ideal.Execution:Device for installation in the central water pipe after the water meter. The device block consists of POM, the filter cylinder made of stainless steel.Delivery:Complete filter unit with wall bracket and manometers. The standard devices have a 1 "fitting. Optionally, the units are supplied with 2 flexible hoses á 80 cm, then the connection in 3/4 inch. Please choose when ordering in the selection menu, whether the water from the left (L) or right (R) flows through the device and what size (60 or 120) they need.Note:The filter cartridges are not included, so order now! For more information about CARBONIT® WFP cartridges of the types, Protect, Select or Special, please refer to the product description of the cartridges. The matching filter cartridges can be found here.