Water treatment

Here you will find accessories for water softening systems and water treatment systems. Of course, we can also offer you replacement parts from Clack & Syr. Please feel free to ask us, we would be happy to take care of your inquiries! You can find our contact form here.

Maintenance set for SYR LEX Plus 10 Connect water softening systems

The parts of this maintenance set, which is suitable for all soft water systems of the SYR LEX Plus 10 series, should be replaced every 24 months during maintenance. It contains the following, original, components: • Seal set • Chlorine cell

€144.90*

Assembly block 1 inch IG x 1 inch AG with intersection, bypass function, sampling tap

The assembly block is suitable for the AquaAvanti IronGo iron filter and manganese filter AquaAvanti ManganGo or where a bypass is needed. If there is limited space at the point of connection, the use of a mounting block is ideal. For safety reasons, it may be desirable to be able to bridge the device unit. For such cases, the mounting block (bypass) is ideal. The installation of a mounting block usually takes about one hour. Your installer will surely make you an offer. If you are not sure if you need a mounting block just ask him. The mounting block is working that way Position 1 When the two outer taps are closed and the middle tap is open, the water flows past the connected device (eg AquaAvanti Iron GO or AquaAvanti ManganGo). Position 2 If the two outer cocks are open and the middle closed, all the water flows through the connected devices. Note: If it is necessary to bridge the units, simply return the mounting block to position 1.

€98.00*

Universal flange DN 25 for LEX PLUS 10 Connect S

Universal flange DN 25 from SYR If you do not yet have a suitable flange for the system, you will need this component to connect your SYR LEX PLUS 10 Connect soft water system. This flange is suitable for DRUFI +, IT 3000, IT 4000, LEX Connect individual softening systems 10 to 30, Safe-T and Safe-T Connect as well as other SYR articles. The housing is made of pressed brass and has screw connections on both sides. The installation position can be designed as desired. It is best to order the flange at the same time when you decide on a water softener from SYR.

€79.90*

Clack WS1 Split ring V3150

The Clack WS1 Split ring V3150 is compatible with all Clack WS1 headstock variants. If you need larger quantities and are a commercial buyer please contact us for a price quote.

€0.99*

Clack WS1 Spacer stack V3005-02

The Clack WS1 Spacer Stack V3005-02 is compatible with all Clack WS1 control head variants. If you need larger quantities and are a commercial buyer please contact us for a price quote.

€49.90*

Reinforced hose 1 "inch nut x 1" inch nut

Very high quality armored hose as 1 inch version with 1 x union nut (ÜM) and 1 x union nut (ÜM). The polyethylene (PE) hose has a flat seal and is DIN-DVGW tested. The connections are nickel-plated brass. The armored hose is of course suitable for drinking water installations and also for sanitary and water softening systems. The hose material is very flexible and has a high thermal resistance. The high-quality, flexible hose was produced with a drinking water approval (KTW A, W270, W543, DVGW) and is resistant to electrical corrosion. In addition, it has a vacuum resistance of up to 0.1 mbar, even with the smallest bending gradients and temperatures of up to + 80 ° C.

From €23.90*

Details

WatPass® Resin Cleaner for Water softening systems

The WatPass® Resin Refresh concentrate reliably removes impurities of the resin of your soft water plant that could not be removed during regeneration. We recommend using the Resin Refresh cleaner every 12 months to ensure the function of your system and to remove stubborn impurities of the ion exchanger. Usage Simply add 10 ml of the concentrate per liter of softening resin to the brine shaft. (Example: For 10 liters of ion exchanger, use 100 ml of concentrate.)

€17.90*

Maintenance set for Clack WS 1 CI control head, sealing cage, main piston & bowl

The set is tool-free and very easy to use during routine maintenance. We recommend to do this every 24 months. It fits all Clack WS 1 CI control heads no matter where they are used. Scope of delivery: Main piston seal cage, main piston & bowl

€88.00*

Universal flange DN 20 for LEX PLUS 10 Connect S

Universal flange DN 25 for pressing SYR If you do not yet have a suitable flange for the system, you will need this component to connect your SYR LEX PLus 10 Connect soft water system. This flange is suitable for DRUFI +, IT 3000, IT 4000, LEX Connect individual softening systems 10 to 30, Safe-T and Safe-T Connect as well as other SYR articles. The housing is made of gunmetal and has press connections on both sides (Viega press system for use in copper and stainless steel pipe installations). The installation position can be designed as desired. It is best to order the flange at the same time when you decide on a water softener from SYR.

€68.90*

Reinforced hose 1 "inch nut x 1" inch union nut

Very high quality armored hose as 1 inch version with 1 x union nut (ÜM) and 1 x union nut elbow (ÜMB). The polyethylene (PE) hose has a flat seal and is DIN-DVGW tested. The connections are nickel-plated brass. The armored hose is of course suitable for drinking water installations and also for sanitary and water softening systems. The hose material is very flexible and has a high thermal resistance. The high-quality, flexible hose was produced with a drinking water approval (KTW A, W270, W543, DVGW) and is resistant to electrical corrosion. In addition, it has a vacuum resistance of up to 0.1 mbar, even with the smallest bending gradients and temperatures of up to + 80 ° C.

From €29.90*

Details

Clack WS1 Drive Cap Asy V3004

The Clack WS1 Drive Cap Asy V3004 is compatible with all Clack WS1 control head variants. If you need larger quantities and are a commercial buyer please contact us for a price quote.

€38.90*

Universal flange DN 32 for LEX PLUS 10 Connect S

€89.90*

Clack O-Ring 215 V3150

The Clack O-ring 215 V3150 is compatible with all Clack WS1 headset variants. If you need larger quantities and are a commercial buyer please contact us for a price quote.

€0.99*

Details

SYR cover universal flange DN 20 - DN 32

SYR cover universal flange DN 20 - DN 32. For sealing when no valve or water softener is connected to the flange.

€29.90*

Clack WS 1.25/1.5 spacers assembly V3430-01

The Clack WS 1.25/1.5 spacers assembly V3430-01 for compatible control heads. If you need larger quantity and you are commercial buyer, please contact us for price inquiry.

€89.90*

Clack WS1 Piston downflow V3011

The Clack WS1 Piston downflow V3011 is compatible with all Clack WS1 control head variants. If you need larger quantities and are a commercial buyer please contact us for a price quote.

€15.90*

Clack BSPT connections straight 1" V3007-06

The Clack BSPT connector straight V3007-06 is compatible with all Clack WS1 control head variants. The BSPT connection 1" is used for the change from female to male thread 1 inch. If you need larger quantities and are a commercial buyer please contact us for a price inquiry.

€21.90*

Details

Sewage connection set for water softeners

The Sewage protection Valve is used for contact-free water drainage into the sewer network. By connecting the overflow protection and waste water hose to two valves that rotate 180 °, there is no splash of water when it drains off. The air barrier ensures that the waste water does not come into contact with the waste water hose. This means that no bacteria from the sewage system can get into your drinking water pipe. Bacteria cannot be transmitted through the air. The waste water protection valve is placed vertically on the sewer connection. As soon as the water flows through the two hoses (overflow protection and waste water hose), the resulting water pressure opens the valve and the water can easily run into the waste water pipe. The valve then seals again automatically. This means that the water does not flow back and unpleasant smells and any bacteria that may develop in the hose are avoided. More information: Flow cleaning: 30 l / min Material: polypropylene vertical discharge: 120.9 l / min Material: polypropylene, white Note: Do not use a drain cleaner on this product.

€89.00*

Clack Injektor white V3010-1e

The Clack Injector white V3010-1e is compatible with all Clack WS1 control head variants. If you need larger quantities and are a commercial buyer please contact us for a price quote.

€6.90*

Filter wrench, SW-4, for Big Blue® housing, 20"

The "SW-4" filter wrench for Big Blue® housings fits all 20" inch housings. Manufacturer: Pentair/PENTAIR™ USA

€7.99*

UV-C replacement lamps for the UST UV water disinfection system UV-C 21 Watt

Power watt: UV-C 21 Watt

The UV-C water treatment systems of the Pure series, like all UV systems, require a regular change of the lamps in order to guarantee the disinfection performance during operation. Change intervals UV-C 21 watts: approx. 8000 hours UV-C 40 watts: approx. 8000 hours UV-C 50 watt: approx. 8000 hours UV-C 75 watt: approx. 8000 hours UV-C amalgam 120 watts: approx. 10,000 hours What is UV water treatment? Pathogenic bacteria or viruses can be inactivated with UV or UVC radiation. This means that they are no longer harmful to health! Treatment at a wavelength of 254 nm ensures fast, effective and safe disinfection. This process is economical and has been used worldwide for many years. With UV irradiation, germs can be safely used in water without the use of chlorine. The process is absolutely harmless and of course the water tastes much better than what has been treated with chlorine. Maintenance Replacement of the UV lamps approximately every 12 months The lamps can be easily loosened with screws and then pulled out for replacement.

Variants from €60.50*

€86.00*

Birm - filter granulate for the removal of iron and manganese 1 L

Amount: 1 L

BIRM® is a specially developed black filter granulate which is coated with manganese dioxide (MnO2) and oxidizes iron and manganese using catalysis and then filters them off. The BIRM® filter material is not exhausted if oxygen is dissolved in the water. The manufacturer states that a content of 15% of the dissolved iron is sufficient (1 mg / l Fe therefore requires 0.15 mg / l O2). This means that BIRM® does not have to be regenerated, just rinsed. BIRM® can also be used to remove manganese at stable pH values ??in the raw water of 8.0 to 8.4. However, the removal of iron at this pH is no longer optimal. BIRM® must not come into contact with strong oxidizing agents such as chlorine or potassium permanganate.

€9.90*

Clack WS1 Spacer stack V3005-02

The Clack WS1 Regenerant piston V3174 is compatible with all Clack WS1 control head variants. If you need larger quantities and are a commercial buyer please contact us for a price quote.

€11.90*

Calcite for water treatment 25 kg bag

The filter material Calzit can be used universally and is mainly used for the treatment of drinking water and industrial water. Application areas: • Filtration of spring and surface water containing turbid matter • Filtration in connection with the deacidification • Filtration of circulating water (cooling water, service water, in industry) Advantages: • Universal filter material • Iron removal and manganese removal due to its alkaline reaction and porosity • Increase in the filtration speed

Content: 25 Kilogramm (€1.72* / 1 Kilogramm)

From €42.90*

Details