Sediment Filtration, Sand Filtration, and Contaminants for Wells & Household Connections

The SYR Drufi + DFR is a combination of fittings, specially developed for house entrance installation in accordance with DIN 1988, consisting of a semi-automatic backwash filter in accordance with DIN EN 13443-1 and a pressure reducer in accordance with DIN EN 1567. The Drufi + DFR combines the latest technology and the highest quality workmanship. Connected to a DN 50 drainage pipe, the integrated funnel directs the backwash water into the sewage system. Since the Drufi + DFR is equipped with a display ring for maintenance reminders according to DIN 1988, you always have the next backwash in view. In the case of the Drufi + DFR valve combination, the correct installation sequence according to DIN 1988 is observed. The Drufi flange program is used for installation in the pipeline. The flanges can be installed in vertical and horizontal lines. The built-in pressure reducer enables individual pressure setting and completes the excellent properties in the smallest of spaces. The Drufi + DFR consists of a mechanically acting, semi-automatic backwash filter. In addition, it is equipped with a flange seal, hexagon socket screws for flange mounting and an assembly key for the hexagon socket screws. The pressure reducer insert is set at the factory to 4 bar output pressure, whereby the external adjustment handle allows an individual pressure setting between 1.5 and 6 bar. An outlet pressure manometer is also part of the equipment of the Drufi + DFR. The filter cup is made of high quality plastic. The housing and the internal plastic parts are made of impact-resistant thermoplastic, the rubber parts are made of age-resistant elastomers. A low-lead, dezincification-resistant gunmetal alloy or stainless steel is used for all other functional parts. The ring seals used are made of asbestos-free fibers. All materials correspond to the recognized rules of technology. The plastic parts and elastomers that come into contact with water correspond to the KTW guideline of the Federal Environment Agency. The advantages at a glance • prevents pitting and corrosion • high flow rate • Backwash system with strong effectiveness • Control elements marked yellow • Practical slide ring for maintenance reminders • UV protection against germs • Reminder function for backwashing through maintenance display • Accessories: RSA automatic backwashing system, can be retrofitted without tools • DVGW-tested security Our recommendation Be sure to order the SYR connection flange DN 20 to 32 if you do not already have it.

Our water inlet filter WatPass with integrated pressure reducer and manometer is intended for the filtration of drinking and service water. With 90 µm it filters particularly fine. It protects your water pipes and the rest of the installation with the connected water-carrying devices from corrosion and functional damage. Foreign particles such as rust, sand, lime and other particles are often responsible for this. The flow-optimized filter is made of high-strength, technical plastic. Another big advantage of this water filter is that it has a continuously adjustable, soundproofed pressure reducer and a pressure gauge that controls the water pressure. The 12 month display serves as a reminder for the next filter change (DIN EN 806-5). If you do a backwash every two months, the filter will thank you with a good throughput. Backwashing must be carried out at the latest when the water pressure in the line decreases due to increasing contamination of the filter. How does it work? This is initiated by turning the backwash button as far as it will go. The contaminated water now flows over the pre-sieve. The water flows through the filter element in the opposite direction and flushes the contaminated filter element free. The water consumption for a backwash is very low. The backwashing process should take about 5-10 seconds, depending on the degree of soiling. If the filter element has not been completely cleaned (visual inspection), backwashing must be carried out again. Since the WatPass house entrance filter has a rotatable connection element, it can be installed horizontally as well as vertically. This makes assembly very easy and fits in almost any installation situation. Please note: The filter cannot be used with chemical-treated circulating water and when oils, greases, solvents, soaps and other lubricating media are in the water. Furthermore, it is not suitable for the separation of water-soluble substances and very coarse dirt particles.

With the BRUNNENWASSER PLUS water test you can quickly and easily get an overview of the water quality of your fountain. The analysis includes the main pollutants in the water. The advantages of the water test     Simple sampling including instructions - no previous knowledge required     Water analysis in the accredited water laboratory DIN-EN-ISO 17025     Express analysis of your water sample (3-7 days), including expert tips     Analysis time only about 7 working days     Easy interpretation due to traffic light function of the analysis results also understandable for laypersons     If limits are exceeded, there are brief explanations of possible original causes The wide analysis spectrum of the Brunnenwasser Plus water test examines your water samples in addition to many important test values ??for microbiological parameters such as E.coli bacteria and enterococci. These can cause infections in immunodeficient people and therefore must not be contained in your drinking water. This water test tests your well water on a total of 19 test values, so that it can be safely used that goes beyond the irrigation of ornamental and useful plants. How is the well water PLUS analysis?After placing your order, we will send the water analysis set within 24 hours by Deutsche Post / DHL or UPS courier. The test set contains everything you need for sampling, such as sampling vessels, detailed instructions and of course a free return label. You do not need to have any previous knowledge. If you have any questions, the IVARIO drinking water experts and of course we from the water filter center team are available free of charge by phone and e-mail. Which pollutants are analyzed in the Brunnenwasser PLUS water test? The Brunnenwassertest PLUS includes the analysis of the following substances, according to the detection limits of the Drinking Water Ordinance (TrinkwVO): Indicator parameters coliform germs (intestinal germs) microbiological parameters drinking water regulationE. coliEnterococci Heavy metals     lead    silver    zinc Minerals and hardness agents     iron    magnesium    manganese    calcium    sulfate    chloride    beryllium    Water hardness (total hardness) nitrogenous compounds     ammonium    nitrite    nitrate further examination parameters     PH value    electric conductivity We wish you much success and a good test result!

Unser halbautomatischer Hauswassereingangsfilter WatPass mit integriertem Druckminderer und Manometer ist zur Filtration von Trink- und Brauchwasser bestimmt. Mit 90µm filtert er besonders fein. Er schützt Ihre Wasserleitungen und die übrige Installation mit den  daran angeschlossenen wasserführenden Geräten vor Korrosions- und Funktionsschäden. Dafür verantwortlich sind häufig Fremdteilchen wie Rost, Sand, Kalk und andere Partikel. Der strömungstechnisch optimierte Filter ist aus hochfestem, technischem Kunststoff gefertigt.  Ein weiter großer Vorteil dieses Wasserfilters besteht darin, dass er einen stufenlos einstellbaren, schallschutzgeprüften,  Druckminderer, sowie ein den Wasserdruck kontrollierendes Manometer besitzt. Die 12 monatige Anzeige, dient als  Erinnerung an den nächsten Filterwechsel (DIN EN 806-5). Wenn Sie alle zwei Monate eine Rückspülung durchführen, wird der Filter Ihnen dies mit einer guten Durchlaufleistung danken. Spätestens wenn aufgrund zunehmender Verschmutzung des Filters der Wasserdruck in der Leitung nachlässt, ist eine Rückspülung vorzunehmen. Wie geht das? Durch Drehen des Rückspülknopfes bis zum Anschlag wird diese eingeleitet. Das verunreinigte Wasser fließt nun über das Vorsieb. Dabei durchströmt das Wasser das Filterelement in entgegengesetzter Richtung und spült das verunreinigte Filterelement frei. Der Wasserverbrauch für eine Rückspülung ist sehr gering. Der Rückspülvorganges sollte, je nach Verschmutzungsgrad ungefähr 5-10 Sekunden andauern. Wurde das Filterelement nicht komplett gereinigt (Sichtkontrolle), ist die Rückspülung nochmals durchzuführen. Da der WatPass Hauseingangsfilter ein drehbares Anschlusselement hat, kann er waagrecht als auch senkrecht eingebaut werden. Dadurch ist die Montage sehr einfach und passt in nahezu jeder Einbausituat Bitte beachten: Der Filter ist  nicht einsetzbar bei chemikalienbehandelten Kreislaufwassern und wenn  Öle, Fette, Lösungsmittel, Seifen und sonstige schmierende Medien sich im Wasser befinden. Weiterhin ist er nicht geeignet für die Abscheidung wasserlöslicher Stoffe und sehr grober Schmutzpartikelbelastung.

The WatPass® domestic water inlet filter with integrated pressure reducer and pressure gauge is designed for the filtration of drinking and process water. We supply it here with the appropriate automatic backwash system. With 90µm it filters especially fine. It protects your water pipes and the rest of the installation with the connected water-carrying devices from corrosion and functional damage. This is often caused by foreign particles such as rust, sand, lime and other particles which the WatPass filters reliably. The flow-optimized filter is made of high-strength, technical plastic. Another great advantage of this water filter is that it has a continuously adjustable, sound-tested, pressure reducer, as well as a pressure gauge controlling the water pressure. If you set the backwash automatic to approx. every 4-8 weeks backwash interval, the filter will thank you with a good flow rate. Contamination due to the build-up of a biofilm in front of the filter is almost impossible. At the latest when the water pressure in the pipe decreases due to increasing contamination of the filter, a backwash should be carried out. How does this work? When the automatic backwash system is triggered, sediments are flushed out into the permanently connected outlet. In the process, the water flows through the filter element in the opposite direction and flushes the contaminated filter element free. The water consumption for backwashing is very low. The backwash process should last approximately 5-10 seconds, depending on the degree of contamination. Since the WatPass house entrance filter has a rotatable connection element, it can be installed horizontally as well as vertically. This makes installation very easy and fits in almost any installation situation. WatPass® Automatic Backwash Operating Modes backwash filter can be powered by electricity and/or battery backwash setting 1-99 days; hours are also possible backwash duration 15, 30, 45, 60, 90 seconds adjustable immediate backwashing is possible at any time optimally suitable for drinking water Please note: The filter cannot be used with chemically treated circuit water and if oils, greases, solvents, soaps and other lubricating media are present in the water. Furthermore, it is not suitable for the separation of water-soluble substances and very coarse dirt particle loads.   .

Backwash filter, pressure reducer, & leakage protection >> TRIO! With the TRIO DFR/LS from the manufacturer SYR, three fittings now become one. The combination device consists of a semi-automatic, backwashable filter according to DIN EN 13443-1, a pressure reducer according to DIN EN 1567 and a leakage protection according to DIN 3553. Since all this is built into one fitting, you save a lot of space and, of course, installation effort. The backwashable water filter provides for clear water without letting washed in foreign particles into the house installation. The pressure reducer saves water without loss of comfort and keeps the pressure constant. The leakage protection continuously monitors the installation and shuts off the water in case of emergency. As part of the intelligent SYR Connect system, the TRIO DFR/LS Connect can be linked to other devices such as the NeoSoft Connect, NeoDos Connect dosing pump or SafeFloor Connect floor sensor and controlled via app. The functions at a glance Backwash filter - reliably filters foreign particles out of drinking water - prevents pitting and corrosion - Backwash system with strong efficiency pressure reducer - helps to save water (without loss of comfort) - reliably regulates water pressure - Complete pressure reducer cartridge for quick maintenance Leakage protection - continuously monitors the house installation - reliably protects against expensive water damage  and water wastage - detects micro leaks - simplified handling due to self-learning phase - several user profiles adjustable Connect function - WLAN/LAN capable - Control via SYR App - in online mode notifications via  push message and/or e-mail - with the soft water system NeoSoft Connect and  the SafeFloor Connect floor sensors linkable Connection - fits on the SYR flange system (DN 20 to 32)  and on the sandwich flange of the NeoSoft Connect - included in delivery: flange gasket, hexagon socket head screws  for flange mounting, mounting key

PENTEK BIG BLUE BAG FILTER HOUSINGS The PBH Big Blue bag filter housings, are available in 10" and 20" inch lengths. They are excellent when long service life is required for sediment filtration. The large volume of the filter bags guarantees a very large capacity . Therefore, these filter housings are very suitable for all operators of water treatment plants. These filter housings are ideal for low flow applications such as well pre-filtration, food processing, commercial and industrial applications. The Big Blue housings have been tested and certified to NSF® (International NSF/ANSI Standard) for suitable materials and structural integrity requirements, making them excellent for industrial uses or drinking water filtration. The O-rings are manufactured from BUNA-N. The strong, lightweight and corrosion resistant filter housings are made of polypropylene and are easy to install. Of course, we can also supply you with the matching bag filters in many different µm thicknesses as packaging units. As inlet or outlet the housings are available in the connection sizes 1" with NPT thread, or 11/2 inch with BSP thread. Please select the appropriate variant for your order via the selection menu and note the thread type. Why bag filters? Well water also contains sediments such as sand, oxides, clay and loam particles.  If downstream treatment systems (e.g. iron and manganese filters) or garden irrigation systems are to be operated, pre-filtration of sediments is necessary.  Sediment filters thus reduce the amount of sediment carried along by the pump with the pumped water and ensure, among other things, that the mechanisms of such devices as Oxydizer classic or pH Neutralizer are not prematurely contaminated or blocked. Equipment The Pentair PBH is supplied with pressure gauge and drain cock.  A stainless steel mounting bracket (including screws), two double pipe nipples and a housing opening wrench are also supplied. The pressure gauge is used to measure the outlet pressure. When this drops, the filter is full. This allows you to check at a glance whether the bag needs to be cleaned. With the drain cock on the housing, you can simply drain the water before cleaning or changing the filter, which makes cleaning much easier afterwards. Note: The NPT threads are slightly different in diameter, number of turns (pitch in turns per inch) and taper angle compared to the Whitworth threads also called British Standard Pipe (BSP), which are common in Germany, so that both threads cannot be screwed together.    

The Carbonit water filters QUADRO are made of stainless steel domestic water filter for the highest demands. An exceptionally high-quality workmanship paired with high throughput (4-cartridge device in parallel circuit) and little space you will not find a second time in the quality of our Martkenntniss. The QUADRO ensures that the water comes out of the tap just as clean as it is "sent on its way" by the water supplier. A house water filter keeps, possibly by working on the drinking water network, dissolved micro particles back. In addition, the precious wetness ages on its way through long distances and stagnation. The QUADRO is suitable for installation in the central water pipe after the water meter. The optionally available WFP filters extract especially chlorine, organic compounds and particles. Dirt filters according to DIN 19632 avoid the entry of foreign particles and thereby triggered trough and pitting corrosion (corrosion protection).The systems impress with a simple installation and the exceptional retention values ??make you to your insurance, in terms of hot water, in your house :-)By equipping with WFP Premium (20 µm filter fineness) or WFP Select (10 µm filter fineness) activated carbon cartridges manufactured by Carbonit in Germany, the system becomes an excellent filter for general soiling. In addition, the WFP Protect (5 µm filter fineness) results in a very good fine filtration. The WFP Premium (0.45 µm filter grade) has the same outstanding filtration performance as the well-known NFP Premium filter cartridge. The WFP Premium filters contaminants such as pesticides, chlorine, arsenic, heavy metals, drug residues, plasticizers and hormone-like substances. More information can be found in our blog under Test & Report.We recommend the Quadro with 10 or 20 µm cartridges as a pre-filter with the simultaneous use of ultrafine filters such as Sanuno, Mercuro, AquaAvanti Single, Vario HP at the water tap of your house. With the filter cartridges WFP Protect or WFP Premium it can be used as the finest filter for the whole house. Since the flow resistance of the WFP Premium is slightly reduced because of the high filter fineness, we definitely recommend using the Quadro 120 here.The Quadro from the German manufacturer Carbonit® is unrivaled in terms of quality and filtration performance to our knowledge. If you want premium quality, then the Quadro is our recommendation for you! For households up to three people, the Quadro 60 is the right choice, for higher needs, the Quadro 120 is ideal.Execution:Device for installation in the central water pipe after the water meter. The device block consists of POM, the filter cylinder made of stainless steel.Delivery:Complete filter unit with wall bracket and manometers. The standard devices have a 1 "fitting. Optionally, the units are supplied with 2 flexible hoses á 80 cm, then the connection in 3/4 inch. Please choose when ordering in the selection menu, whether the water from the left (L) or right (R) flows through the device and what size (60 or 120) they need.Note:The filter cartridges are not included, so order now! For more information about CARBONIT® WFP cartridges of the types, Protect, Select or Special, please refer to the product description of the cartridges. The matching filter cartridges can be found here.

PENTEK BIG BLUE BAG FILTER HOUSINGS The PBH Big Blue bag filter housings, are available in 10" and 20" inch lengths. They are excellent when long service life is required for sediment filtration. The large volume of the filter bags guarantees a very large capacity . Therefore, these filter housings are very suitable for all operators of water treatment plants. These filter housings are ideal for low flow applications such as well pre-filtration, food processing, commercial and industrial applications. The Big Blue housings have been tested and certified to NSF® (International NSF/ANSI Standard) for suitable materials and structural integrity requirements, making them excellent for industrial uses or drinking water filtration. The O-rings are manufactured from BUNA-N. The strong, lightweight and corrosion resistant filter housings are made of polypropylene and are easy to install. Of course, we can also supply you with the matching bag filters in many different µm thicknesses as packaging units. As inlet or outlet the housings are available in the connection sizes 1" with NPT thread, or 11/2 inch with BSP thread. Please select the appropriate variant for your order via the selection menu and note the thread type. Why bag filters? Well water also contains sediments such as sand, oxides, clay and loam particles.  If downstream treatment systems (e.g. iron and manganese filters) or garden irrigation systems are to be operated, pre-filtration of sediments is necessary.  Sediment filters thus reduce the amount of sediment carried along by the pump with the pumped water and ensure, among other things, that the mechanisms of such devices as Oxydizer classic or pH Neutralizer are not prematurely contaminated or blocked. Equipment The Pentair PBH is supplied with pressure gauge and drain cock.  The pressure gauge is used to measure the outlet pressure. When this drops, the filter is full. This allows you to check at a glance whether the bag needs to be cleaned. With the drain cock on the housing, you can simply drain the water before cleaning or changing the filter, which makes cleaning much easier afterwards. Note: The NPT threads are slightly different in diameter, number of turns (pitch in turns per inch) and taper angle compared to the Whitworth threads also called British Standard Pipe (BSP), which are common in Germany, so that both threads cannot be screwed together.  

The Hydrocyclone F 710 was developed by engineers for the separation of sand and other sediments, originally for horticulture and agriculture. The Hydrocyclone type F710 from the manufacturer Yamit is specially designed for the problem of silted wells. The hydrocyclone is mostly used in horticulture or agriculture and thus represents a profile solution. Therefore, we offer here the smallest version, as it will be more than adequate for most private well operators. The device works from a minimum throughput of 2.4 m³ / h - 4m³m / h. Please make sure that this service required for the operation is at your disposal. The device does not require an electrical or wastewater connection. In winter, it must be protected by venting against frost. On the function of the hydrocylone Water enters the hydrocyclone via the tangential inlet, creating a spiral flow along the filter walls. The centrifugal force separates the waste and sand particles and pushes them against the walls of the sand separator. These particles float down into the sedimentation tank while clean water flows upwards and exits through the upper outlet. The pressure loss is only 0.2 and 0.5 bar. The separation efficiency is not affected by the accumulation of dirt in the settling tank. The sedimentation tank is emptied by manually opening a purge valve for a few seconds. The collecting tank has a filling capacity of 2.5 liters. Subsequent Filtratrion As a subsequent filter, you should use a commercially available disc filter. Other sizes? If you need a more powerful version, please contact us. The hydrocyclones are available up to a capacity of 330m³ / h.

The WatPass automatic backwashing system turns the WatPass house water backwash filter into a fully automatic machine. The WatPass automatic backwashing system is an electronically controlled additional device and increases the comfort for the home owner enormously. You no longer have to think about triggering the backwash interval, which is usually forgotten. As a result, taste impairments, water pressure losses and even contamination problems can creep into your domestic water system. The use of the automatic backwash is over! Backwash intervals between 1 hour and 52 weeks can be set. The device is battery-operated and can therefore be used without a power supply unit, which means that it also works in the event of a power failure. Batteries included.

Sediment & activated carbon replacement filter for the patented BIG GREEN ™ combination water filter from the Canadian manufacturer CANPRO. Thanks to the two-stage high-flow filtration (20 µm sediment / 10 µm activated carbon filter) it can reliably remove microplastics, chlorine, drug residues and pesticide residues. Reduce or even remove hormone-like substances. The taste of your water is also optimized and unpleasant odors are also significantly reduced. How the BIG GREEN ™ works After your house water has been pre-filtered, in the BIG GREEN ™ it first flows through the outer filter cartridge (sediment & activated carbon and then enters the TAC filter. Microscopic seed crystals now form on the surface of the TAC granulate. These crystals envelop the im Dissolved limescale in water without chemically changing it. With this process, the limescale in pipes and devices no longer adheres so strongly and, in a continuous process, existing limescale deposits in pipes and devices are removed Protect your entire piping system as well as large appliances such as washing machines, dishwashers and other hot water devices from limescale deposits without using salt. Maintenance & cartridge change The device is almost maintenance-free and should only be cleaned every time the filter is changed. The service life of the sediment & activated carbon unit is normally 6-12 months. Scope of delivery Sediment & activated carbon cartridge

BIGGREEN sediment, activated carbon & limescale protection (TAC) replacement filter unit for the patented BIG GREEN ™ combination water filter from the Canadian manufacturer CANPRO. Thanks to the two-stage high-flow filtration (20 µm sediment / 10 µm activated carbon filter) it can reliably remove microplastics, chlorine, drug residues and pesticide residues. Reduce or even remove hormone-like substances. The taste of your water is also optimized and unpleasant odors are also significantly reduced. The lime treatment is based on the so-called TAC technology (Template Assisted Crystallization), which does not require any salt. How the BIG GREEN ™ works After your house water has been pre-filtered, in the BIG GREEN ™ it first flows through the outer filter cartridge (sediment & activated carbon) and then enters the TAC filter. Microscopic seed crystals now form on the surface of the TAC granulate. These crystals envelop the im Dissolved limescale in water without chemically changing it. With this process, the limescale in pipes and devices no longer adheres so strongly and, in a continuous process, existing limescale deposits in pipes and devices are removed Protect your entire piping system as well as large appliances such as washing machines, dishwashers and other hot water devices from limescale deposits without using salt. Maintenance & cartridge change The device is almost maintenance-free and should only be cleaned every time the filter is changed. The service life of the sediment & activated carbon unit is normally 6-12 months. The service life of the TAC unit is at least 3 years. Scope of delivery Limescale protection, sediment & activated carbon cartridge

The patented BIG GREEN ™ from the Canadian manufacturer CANPRO is a real innovation. It protects your house installations and all devices that come into contact with hot water from limescale deposits in an environmentally friendly and sustainable manner. The lime treatment is based on the so-called TAC technology (Template Assisted Crystallization), which does not require any salt. The BIG GREEN ™ is very compact and fits into your house connection room even in tight spaces. Thanks to the two-stage high-flow filtration (20 µm sediment / 10 µm activated carbon filter) it can reliably remove microplastics, chlorine, drug residues and pesticide residues. Reduce or even remove hormone-like substances. The taste of your water is also optimized and unpleasant odors are also significantly reduced. The advantages of this innovative combination filter device • Chemical-free limescale protection • sustainable as no salt is required • Limescale protection, pollutant & sediment filtration in one device • no electricity is required • compact design •easy construction • almost maintenance-free • The filter change is easy to carry out Functionality After your house water has been pre-filtered, in the BIG GREEN ™ it first flows through the outer filter cartridge (sediment & activated carbon and then enters the TAC filter. Microscopic seed crystals now form on the surface of the TAC granulate. These crystals envelop the im Water dissolved lime without changing it chemically. With this process, the lime in pipes and devices no longer adheres so strongly and even limescale deposits in pipes and devices are removed in a continuous process. With the BIG GREEN ™ you can Protect the entire piping system as well as large appliances such as washing machines, dishwashers and other hot water devices from limescale deposits without using salt. Installation The BIG GREEN ™ (patent number EP3636598) should be installed after the water meter and a house inlet filter (DIN 1988). A functioning equipotential bonding must be available in the house. The assembly of the very valuable device is very easy to carry out. Maintenance & cartridge change The device is almost maintenance-free and should only be cleaned every time the filter is changed. The service life of the sediment & activated carbon unit is normally 6-12 months, that of the TAC unit at least 3 years. Scope of delivery Filter housing, wall bracket, connection nipple, sediment & activated carbon cartridge, limescale protection cartridge

BIGGREEN limescale protection (TAC) replacement filter unit for the patented BIG GREEN ™ combination water filter from the Canadian manufacturer CANPRO. The lime treatment is based on the so-called TAC technology (Template Assisted Crystallization), which requires no salt. How the BIG GREEN ™ works After your house water has been pre-filtered, in the BIG GREEN ™ it first flows through the outer filter cartridge (sediment & activated carbon) and then enters the TAC filter. Microscopic seed crystals now form on the surface of the TAC granulate. These crystals envelop the lime dissolved in the water without changing it chemically. As a result of this process, the limescale in pipes and devices no longer adheres so strongly and, in a continuous process, existing limescale deposits in pipes and devices are removed. With the BIG GREEN ™ you can protect your entire piping system as well as large appliances such as washing machines, dishwashers and other hot water devices against limescale deposits without the use of salt. Maintenance & cartridge change The device is almost maintenance-free and should only be cleaned every time the filter is changed. The service life of the TAC unit is at least 3 years. Scope of delivery Limescale protection cartridge

WatPass® SedimentGo water treatment system for sediment filtration for well water. The system can also be used for industrial applications to significantly reduce the sediment load behind backwashable filters. It is used wherever conventional cartridge filters reach their limits. The filter bed absorbs dirt very well and the running time between two backwashes is significantly longer than with conventional multi-layer filters. The water saving due to fewer backwashes is significant. Fine particles are safely removed and the hydrophilic surface enables significantly higher filter speeds to be achieved. Sand filters remove particles up to a size of 25 µm. Multi-layer filters ideally remove particles up to 12 µm in size. Our filter material removes particles smaller than 5 µm and, thanks to its extremely open surface, absorbs up to three times as much dirt as sand or multi-layer filters. The filter granulate used consists of a special mineral which provides an extremely large surface for sediment filtration. It is perfect for filtering fine particles in the water. The macroporous structure of the material ensures sediment filtration down to a size of less than 5 µm. The special surface and its high porosity make it a perfect filter medium for every application where the removal of very fine particles is important. Advantages of the WatPass® SedimentGo very clear water low operating costs Relatively few backwashes necessary less filter material required, therefore lower transport costs a single filter material instead of multiple layers as in traditional multi-layer filters Filter material certified according to NSF Standard 61 The WatPass® SedimentGo consists of: A tank (color may differ from the illustration) and a volume-controlled, very low-maintenance central control valve type Clack WS 1 Cl IA, with multilingual menu navigation (D, EN, ES, FR, PL) and color display. Installation conditions for all system sizes Drinking or raw water connection Socket 230 V / 50 Hz Drainage connection Pressure reducer at> 6 bar House water filter at the entrance Connection thread: 1 inch Frost-free installation location For installations according to DVGW guidelines, a DVGW-certified pipe separator must be used (not required for your own well). The system is delivered by a forwarding agent. When ordering, please be sure to provide us with a telephone number under which you can be reached upon delivery.