Assembly block 1 1/4 inch IG x 1 inch AG with intersection, bypass function, sampling tap

The WatPass® IronGo deferrisation system oxidises dissolved iron from your water. The Clack control head with German menu and colour display distinguishes this system from many other suppliers, as usually only monochrome, English-language versions are offered. The colour modes of the display make it easier to check the operating status (blue = everything is OK). If there is an error (red = fault), you can see this at a glance. The German menu makes setting the system much easier. Nothing needs to be changed or topped up. The IronGo is therefore virtually maintenance-free. Its performance is outstanding, it can filter up to 5 mg/l of iron from the water. Installation is very simple. Even during the backwash, water can be easily removed. At a freely programmable time (approximately every 7 days), the concentrate is automatically disposed of through an outlet. A 3 metre drain hose is supplied and can be replaced with a longer garden hose if necessary. An additional mounting block (accessory) can be purchased for bridging, but is not absolutely necessary for operation, although it is highly recommended. This helps to maintain the water supply with untreated water during maintenance work. The system consists of: GRP pressure bottle in various sizes (adapted to the capacity), which is filled with high-quality filter material. The catalyser granulate is coated with manganese dioxide (MnO2). Volume-controlled central control valve type Clack WS 1 CI IA. How the catalyst granulate works Iron is usually present as bicarbonate in groundwater.  Due to the excess carbonic acid, iron cannot be filtered. As a catalyser, the filter material causes the transition from soluble Fe2+ to insoluble Fe3+, the resulting oxidation product iron hydroxide is easily filterable. A pH value of at least 6.8 (preferably 7.0) is required to filter iron successfully, regardless of the filter material used. If the pH value of your water is too low, please contact us specifically. This must then be raised by additional filter technology as a first step. We then recommend the WatPass pHGO system. Necessary installation conditions: Water connection socket 230 V / 50 Hz, waste water connection, pressure reducer at > 6 bar Product Details Flexible, space-saving design Corrosion-resistant GRP pressure bottle High-quality filter material Computer-controlled Clack WS 1 CI IAValve Volume Control Extremely low maintenance Treatment of ferrous water Reduction of the orange-brown colour tone in the water Areas of application: Well water, garden irrigation, laundries, industrial water utilisation, koi and fish ponds and all areas where excessive iron content in the water causes problems The WatPass IronGo is available in different versions depending on the required performance or the amount of well water to be treated (the colour of the pressure bottle may differ in some versions). You can find these in the selection menu. Note: If the IronGo filter systems are to be used in the drinking water sector, they must comply with the ‘Rules for drinking water installations’ in accordance with DIN 1988 -200 in conjunction with DIN EN 1717:2011-08. It is then necessary to install a pipe separator to protect the public drinking water network.