"EM IFP Premium 5" AA Inline main filter stage Carbonit & Prime Inventions
179,90 €
Tilgængelig, leveringstid: 1-3 Tage
Produktinformation ""EM IFP Premium 5" AA Inline main filter stage Carbonit & Prime Inventions"
Water filtration and taste improvement of the water combined in one water filter. Especially applicable at low line pressure as main filter of the AquaAvanti Inline series with quick-change housings and original CARBONIT filter.
This main filter stage is the basic system that can be used as the sole filter system. In addition, it is the basis for one or two extension stages.
Advantages of the Aqua Avanti Inline system compared to conventional filter housings
Forget about dismantling and unscrewing filter housings to change filters. With the AA Inline filter system, you can change filter cartridges in seconds. Simply remove the filter cartridge by turning it counterclockwise and insert a new filter cartridge the other way around. Done. You no longer need a housing key. Since you do not come into contact with the inside of the filter cartridge, the replacement is very hygienic.
Description of the EM IFP Premium 5 Inline filter
This filter cartridge was manufactured by CARBONIT® based on the NFP Premium exclusively for Prime Inventions. Due to the mechanical filter fineness of < 0,45µm it has a high chemical-physical adsorption performance against chemical substances. Micro- or nanoplastics, heavy metals, pesticides, chlorine and hormones can be filtered. The filter cartridges produced by CARBONIT® combine water filtration and a taste improvement of the water. For the production, a special EM ceramic is added to the activated carbon filter during the process of sintering. This ceramic causes, among other things, a reduction of the surface tension of the water and the reduction of the cluster structures. As a result, the taste of the water is described by most people as softer or rounder.
IFP type filter cartridges are ideal for retaining potential pollutants in drinking water systems. Pollutants of anthropogenic origin, which could accumulate in the organism, are reliably removed and stored. The IFP activated carbon filter block has a standard thin wall for liquid treatment at low line pressure.
Connections (standard connection set is included)
The included faucet adapter has a 3/8" standard thread and thus fits to the faucets offered by us mesiten of. An adaptation to other threads e.g. UNS 7/16-24 is of course optionally possible. For easy connection to the corner tap under the sink, a high-quality European connection adapter JG ASV-7 is supplied with each main filter stage, so that they do not need an additional corner valve with existing 3 / inch cold water connection. Also a leakage protection is supplied, which provides you with additional safety.
Additional accessories
As an alternative to the enclosed connection set, you can find suitable adapters in the Accessories & Spare Parts category for easier, space-saving installation.
Optionally available are:
- Connector
- Adapter DM 3/8 inch to 3/8 inch 90 degree
- 3/8 inch connection hose, AA inline filter
Usage: The filter cartridge must be replaced after six months. Generally, up to 5,000 liter of water may be filtered within this time. However, an earlier change may be necessary if the water flow is noticeably reduced. This is usually an indication of increased occurrence of fine particles in the unfiltered water. The new water flow rate is approx. 4 liters/min. Use only with cold water, protect from frost.
| Durchfluss: | max. 4 l/min |
|---|---|
| Einsatzdauer max.: | 6 Monate |
| Filterfeinheit: | 0.45 |
| Filtrationskapazität max. l (DIN 1988): | 5000 |
Height with filter head: approx. 33 cm
Width filter head: approx. 10 cm (with 90 ° connections approx. 16 cm)
Width filter: approx. 9 cm
Length of tubes: 80cm
Prime Inventions GmbH
Berliner Str.
33334
Gütersloh
Deutschland
info@prime-inventions.de
Related items
Mechanical leakage protection interrupts water supply to subsequent devices.Protect yourself from leaks and possible water damage. The Mini LCM water leakage safety device works mechanically with a compressed tissue tablet, which expands strongly in the presence of moisture, closing the integrated valve. The water supply of the following devices is interrupted.The valve is preferably mounted under the system to be secured and there glued or screwed to the ground. The insert (the tissue tablet) must be replaced after the LCM has been triggered by moisture. The inserts TB-2 are available in 2-packs. The Mini LCM is also available separately for use with reverse osmosis systems or other water filter housings.Connection: 1/4 "RO hoseSupplied accessories: adhesive strips and two wood screwsThe tissue tablet is already installed and the device is ready for use immediately upon delivery :-)
The adapter DM FAU 3/8 inch to US 7/16 - 24 is needed, for example, to connect our article cold water tap brass chrome to the AquaAvanti Inline System.
The adapter facilitates the connection of AquaAvanti inline systems, especially when it is tight and leakage protection is to be used, since the hoses used are relatively stiff due to the design. Of course you can also use the adapter for other, suitable systems such as reverse osmosis systems.
Replacement tablet for water leakage protection 3/8 & 1/4 inch connections. The leakage protection is especially compatible with our AquaAvanti inline systems, reverse osmosis systems and the Pure filter series.
DM Retaining Clip 3/8 "blue is especially compatible with our AquaAvanti Inline Systems, Reverse Osmosis Systems and the Pure Series.
Stainless steel design faucet, ideal for the modern kitchen or a stylish bathroom. The faucet can be stably mounted on thick marble countertops, etc., by means of its more than 8 cm long connecting pipe. The extra thick spout can easily be rotated 360 degrees. Outlet pipe with straightener and M22x1 thread and jet regulator. The Outlet pipe is secured by a barely visible union nut against coming out. Technical specifications Material: housing and spout made of stainless steel, uncoated Smooth, 360 ° swiveling tap Outlet pipe with jet regulator and M22x1 thread for water swirlers Durable, easily replaceable and low-wear ceramic inserts with stainless steel cage Height of worktop to center spout about 295 mm Height of worktop to water outlet about 200mm Discharge spout about 16cm Mounting on worktop, max. Plate thickness about 70 mm Weight: 600 gr, including packaging: 760 gr Dimensions Packaging: W / H / D 67x45x39 cm Connection 3/8 "AG, directly without adapter Bore diameter for worktop approx. 16.5 mm Connection: 3/8 "thread by enclosed adapter An adapter for reverse osmosis systems is available as an option. Please specify the tube thickness of the reverse osmosis system. The ceramic seal kit is easily replaceable and available as a spare part.
For cold, warm and filter water from under table systems. On the right side is the lever that allows you to switch between hot and cold water. The lever on the left controls the filtered water. The two water pipes for service water and filter water are separated inside and lead into the respective outlet for filter water (smaller) or service water (large). The faucet is characterized by integrated internal jet regulators and 360 ° rotatable outlet pipe. Technical specifications Weight: 2.05 kg Height from bottom to perlator: 280 mm Outfeed of the outlet pipe: 260 mm Diameter 44 mm Connection: 3/8 "thread by enclosed adapter Thread for service water outlet: M24 Threaded filter water outlet: M18 Scope of delivery: Connection hoses, table mounting disc with accessories
Shapely, small and compact stainless steel faucet for under counter filter systems in the kitchen. High quality made of brushed stainless steel. The sealing cartridge is also made of stainless steel. Technical specifications 360 ° swiveling plugged outlet pipe Easily replaceable and low-wear ceramic inserts with stainless steel cage Height of worktop to water outlet about 178 mm Discharge spout about 16cm Mounting on worktop: length of threaded rod approx. 68 mm Bore diameter for worktop approx. 11 mm Connection: 3/8 "thread by enclosed adapter Material: housing and spout made of stainless steel, uncoated An adapter for reverse osmosis systems is available as an option. Please specify the tube thickness of the reverse osmosis system.
Quality hose from DMfit. Suitable for Carbonit Sanuno variants, Aqua Avanti Inline systems and many more. We supply the DM Tube hose from 1m in length. It is white, pluggable and compatible with DM and John Guest systems. The price is calculated per meter. We supply lengths from 2 meters in one piece. Certified according to NSF 51, 61-G, WRAS.