Very high quality armored hose as 1 inch version with 1 x union nut (ÜM) and 1 x union nut (ÜM). The polyethylene (PE) hose has a flat seal and is DIN-DVGW tested. The connections are nickel-plated brass. The armored hose is of course suitable for drinking water installations and also for sanitary and water softening systems. The hose material is very flexible and has a high thermal resistance. The high-quality, flexible hose was produced with a drinking water approval (KTW A, W270, W543, DVGW) and is resistant to electrical corrosion. In addition, it has a vacuum resistance of up to 0.1 mbar, even with the smallest bending gradients and temperatures of up to + 80 ° C.

Very high quality armored hose as 1 inch version with 1 x union nut (ÜM) and 1 x union nut elbow (ÜMB). The polyethylene (PE) hose has a flat seal and is DIN-DVGW tested. The connections are nickel-plated brass. The armored hose is of course suitable for drinking water installations and also for sanitary and water softening systems. The hose material is very flexible and has a high thermal resistance. The high-quality, flexible hose was produced with a drinking water approval (KTW A, W270, W543, DVGW) and is resistant to electrical corrosion. In addition, it has a vacuum resistance of up to 0.1 mbar, even with the smallest bending gradients and temperatures of up to + 80 ° C.

Very high quality armored hose as 1 inch version with 1 x union nut (ÜM) and 1 x union nut (ÜM). The polyethylene (PE) hose has a flat seal and is DIN-DVGW tested. The connections are nickel-plated brass. The armored hose is of course suitable for drinking water installations and also for sanitary and water softening systems. The hose material is very flexible and has a high thermal resistance. The high-quality, flexible hose was produced with a drinking water approval (KTW A, W270, W543, DVGW) and is resistant to electrical corrosion. In addition, it has a vacuum resistance of up to 0.1 mbar, even with the smallest bending gradients and temperatures of up to + 80 ° C.

Innovation - Nitrate filtering plant and water softening plant in a cabinet housing This plant is a real innovation. The increasingly noticed and known problem of high nitrate levels in our drinking water, finds with this plant the ideal solution for areas where also the lime content of the water is too high. The treatment of these two tasks in one plant is still rare. We know of no other plant that can do this :-) If you only want to remove nitrate from the water, you can also do this with this plant. In this case, please let us know when ordering the WatPass N&H 10000. Removing nitrates from water is currently the greatest challenge in water treatment. Known solutions with filter cartridges or reverse osmosis systems are very complex and expensive due to the high follow-up costs. With the innovative WatPass N&H 10000 combination system you can free your well or house water from nitrates and reduce the hardness to a reasonable level in a very cost-effective way. The filter media in the system, 25 liters for softening and 10 liters for de-nitration, are automatically and regularly regenerated. Due to the voluminous salt tank, you will need to replace salt relatively rarely. Combination unit WatPass N&H 10000 consists of: A cabinet housing for a salt supply of max. 70kg. A quantity-controlled central control valve type Clack WS 1 CI IA, as well as an integrated fine cutting valve. Suction device and connection line to the central control valve. Integrated in the system, a GRP pressure bottle filled with high quality ion exchange resin. Installation conditions: -Drinking or raw water connection -Socket 230 V / 50 Hz -waste water connection -pressure reducer at > 6 bar -house water filter at the inlet -connection thread: 1 inch Performance data: For households up to: 4-7 pers. Capacity at 10°dH*: 10.000 L Capacity at 15°dH*: 6.660 L Capacity at 20°dH*: 5,000 L Nominal flow**: 3,0 m3/h nominal flow***: 1,0 m3/h max. raw water flow pressure: 6.0 bar min. Raw water flow pressure: 2.6 bar Pressure drop at max. flow: 0.6 bar Regeneration information: Salt consumption per regeneration: 7.0 kg Regeneration time: 60 min. For installations according to DVGW guidelines, a DVGW-certified pipe disconnector is available for purchase, if desired (not required for own well). The plant is also available with other capacities or to be operated as a pure nitrate removal plant. In case of need please contact us. The plant is delivered by forwarding agency. When ordering, please be sure to provide us with a telephone number where you can be reached upon delivery. * until the next regeneration ** according to DIN 19636 (20°dH to 8°dH) *** from 20°dH to 0,5°dH (40 BV/h)

Very high quality armored hose as 1 inch version with 1 x union nut (ÜM) and 1 x union nut elbow (ÜMB). The polyethylene (PE) hose has a flat seal and is DIN-DVGW tested. The connections are nickel-plated brass. The armored hose is of course suitable for drinking water installations and also for sanitary and water softening systems. The hose material is very flexible and has a high thermal resistance. The high-quality, flexible hose was produced with a drinking water approval (KTW A, W270, W543, DVGW) and is resistant to electrical corrosion. In addition, it has a vacuum resistance of up to 0.1 mbar, even with the smallest bending gradients and temperatures of up to + 80 ° C.

WatPass N&H 8000 - nitrate filter system and water softener in one cabinet housing This system is a real innovation. The increasingly noticed and increasingly well-known problem of excessively high nitrate values in our drinking water, finds with this system the ideal solution for areas in which the lime content of the water is too high. The treatment of these two tasks, in one system, is rarely found. We are not aware of any other system that can do this. In addition, there is the comfortable operation through the high-quality Clack control head of the latest generation, with color display and multilingual menu navigation (DE, EN, ES, FR and PL). This is particularly low-maintenance; DIYers can usually replace the seals themselves. We recommend this approximately every 24 months. Removing nitrate in particular from water is currently the greatest challenge in water treatment. Known solutions with filter cartridges or reverse osmosis systems are very complex and expensive due to the high follow-up costs. With the innovative WatPass N&H 8000 combination system, you can free your well or house water from nitrate and the degree of hardness to a reasonable degree and in a very affordable way. The filter media in the system, 20 liters for softening and 10 liters for denitration, are automatically and regularly regenerated. The voluminous salt container means that you rarely need to replace salt. Combination system WatPass N&H 8000 consists of: A cabinet housing for a salt supply of max.70kg. A quantity-controlled central control valve type Clack WS 1 CI IA, as well as an integrated fine blending valve. Extraction device and connection line to the central control valve. Integrated in the system is a GRP pressure bottle filled with high quality ion exchange resin. Installation conditions • Drinking-  or raw water connection • Socket 230 V / 50 Hz • Drainage connection • Pressure reducer at> 6 bar • House water filter at the entrance • Connection thread: 1 inch Performance data For households up to: 3-5 people. Capacity at 10 ° dH *: 4,000 L Capacity at 15 ° dH *: 3,000 L Capacity at 20 ° dH *: 2,000 L Nominal flow rate **: 2.4 m3 / h Nominal flow ***: 0.8 m3 / h max. raw water flow pressure: 6.0 bar Min. raw water flow pressure: 2.6 bar Pressure loss at max.flow: 0.6 bar Salt consumption per regeneration: 6.0 kg Regeneration time: 60 min. For installations according to DVGW guidelines, a DVGW certified pipe disconnector can be installed if required. You can obtain this from your installer. The system is also available with other capacities, if necessary please contact us. The system is delivered by a forwarding agent. When ordering, please be sure to provide us with a telephone number under which you can be reached upon delivery. * until the next regeneration ** according to DIN 19636 (20 ° dH to 8 ° dH) *** from 20 ° dH to 0.5 ° dH (40 BV / h)

WatPass N&H 4000 - nitrate filtration and water softening system in cabinet housing. This plant is a real innovation. The increasingly recognized problem of high nitrate levels in our drinking water finds with this plant the ideal solution for areas where the lime content of the water is also too high. The treatment of these two tasks, in one plant, is rarely found. We know of no other system that can do this. In addition, there is the comfortable operation by the high-quality Clack control head of the latest generation, with color display and multilingual menu guidance (DE, EN, ES, FR and PL). This is particularly low-maintenance, DIYers can usually replace the seals themselves. We recommend this approximately every 24 months. Removing nitrate from water in particular is currently the greatest challenge in water treatment. Known solutions with filter cartridges or reverse osmosis systems are very complex and expensive due to the high follow-up costs. With the innovative WatPass N&H 4000 combination system you can free your well or house water from nitrates and reduce the hardness to a reasonable level in a very cost-effective way. The filter media in the system, 10 liters for softening and 7.5 liters for denitrification (capacity 150g nitrate or 2.4 mol nitrate), are automatically and regularly regenerated. Due to the voluminous salt tank, you need to replace salt relatively rarely. Combination unit WatPass N&H 4000 consists of: A cabinet housing for a salt supply of max. 70kg. A quantity-controlled central control valve type Clack WS 1 CI IA, as well as an integrated fine cutting valve. Suction device and connection line to the central control valve. Integrated in the system, a GRP pressure bottle filled with high quality ion exchange resin. Installation conditions: -Drinking or raw water connection -Socket 230 V / 50 Hz -waste water connection -pressure reducer at > 6 bar -house water filter at the inlet -connection thread: 1 inch Performance data: For households up to: 2-4 pers. Capacity at 10°dH*: 4.000 L Capacity at 15°dH*: 3.000 L Capacity at 20°dH*: 2.000 L Nominal flow**: 1,2 m3/h nominal flow***: 0,4 m3/h max. raw water flow pressure: 6.0 bar min. Raw water flow pressure: 2.6 bar Pressure loss at max. flow: 0.6 bar Salt consumption per regeneration: 3.0 kg Regeneration time: 60 min. For installations according to DVGW guidelines, a DVGW-certified pipe isolator must be installed, if desired. This can be obtained from your installer. The plant is also available with other capacities, if required, please contact us. The plant is delivered by forwarding agency. When ordering, please be sure to provide us with a telephone number where you can be reached upon delivery. * until the next regeneration ** according to DIN 19636 (20°dH to 8°dH) *** from 20°dH to 0,5°dH (40 BV/h)

The WatPass® Nitrate 6000 is a drinking water de-nitrator in a cabinet housing with multilingual menu navigation (D, EN, ES, FR, Pl), color display for faster recognition of the operating states & control head from Clack. It is a real innovation and works according to the ion exchange process. This process is the most established, for the removal of nitrate. The system produces an excellent sensory result and of course it removes the nitrate from your drinking water. The WatPass® Nitrat is particularly energy-saving! Due to the full salination, the filter medium is optimally regenerated and utilized. Advantages No recognizable nitrate contamination after the plant therefore better drinking water very low-maintenance, established technology Excellent price/performance ratio longevity, with regular maintenance For the operation in Switzerland the SVGW regulation has to be observed. Therefore the plants for Switzerland are delivered with nylon protection stocking and silver resin part. Otherwise the plant is designed like the standard version! Nylon protective stocking/ fine salt: Normally, de-nitrating plants in Switzerland are run with fine salt, instead of salt tablets. WatPass® Nitrate 6000 plants that we deliver to Switzerland are therefore equipped with a nylon protective stocking, so that you can operate the softening plants with fine salt. Thereby a blocking of the plant by the fine salt is excluded. Silver resin content ( min 2% ): The ion exchanger resin must contain a minimum of 2% silver resin. Design of the WatPass® de-nitrating systems A cabinet housing with removable lid, in which a GRP pressure bottle (filled with ion exchange resin) sits, forms the basis for the extremely low-maintenance Clack control valve with color display and German operation. This is a real innovation and makes your handling of the plant much easier. The system is, of course, volume-controlled. The innovative control head can be completely disassembled and maintained without tools. Regeneration - what is it? When the preset volume of water flow is reached, the regeneration of the resin is triggered at 02:00 at night. A reserve capacity is programmed by us as a safety factor in the device, so that nitrate-free water after reaching the preset water capacity, is available until regeneration. During regeneration, the nitrate unit automatically passes saline solution (sodium chloride) over the ion exchange resin. During this process, sodium ions (Na+) are again added to the resin. Nitrate is discharged with the saline solution through a separate drain connection. Now the resin is ready to be used again to de-nitrate your drinking water. During regeneration, the WatPass® Nitrate 6000 supplies untreated tap water so that the water supply is available. If the system is inactive (e.g. vacation), a forced regeneration is triggered every 10 days to prevent germination of the resin bed. How long does a filling of salt last? Depending on the nitrate content and your water consumption, one filling will last approximately 3-4 months, then new salt must be added. The integrated safety float valve protects you from overflowing water. Plant size and technical information The plant has a capacity of 315 grams of nitrate or 5.1 mol. The regeneration cycle depends on the water consumption and the nitrate content. We will be happy to advise you on the right plant size. WatPass® Nitrate 6000 with volume control Control valve: Clack WS 1CL IA with color display and German menu navigation as well as (EN, ES, FR,PL) Pressure tank type: 8x35 Resin capacity: 15 liters Salt consumption per regeneration: approx. 2,4 KG regeneration time: approx. 60 min Salt supply: 70 KG Block size (HxWxD): 1.140 x 320 x 500 mm Weight: 25 Kg Scope of delivery: Cabinet housing for one salt stock. A quantity-controlled central control valve type Clack WS 1 CI, with international menu guidance and color display. Integrated in the system, a GRP pressure bottle filled with high quality ion exchange resin. Installation conditions for all plant sizes: Drinking or raw water connection Socket 230 V / 50 Hz waste water connection pressure reducer at > 6 bar house water filter at the inlet connection thread: 1 inch frost-free place of installation The plant is delivered by forwarding agency. When ordering, please be sure to provide us with a telephone number where you can be reached upon delivery.

The WatPass® Nitrate 10000 is a drinking water de-nitrator in a cabinet housing with multilingual menu navigation (D, EN, ES, FR, Pl), color display for faster recognition of the operating states & control head from Clack. It is a real innovation and works according to the ion exchange process. This process is the most established, for the removal of nitrate. The system produces an excellent sensory result and of course it removes the nitrate from your drinking water. The WatPass® Nitrat is particularly energy-saving! Due to the full salination, the filter medium is optimally regenerated and utilized. Advantages No recognizable nitrate contamination after the plant therefore better drinking water very low-maintenance, established technology Excellent price/performance ratio longevity, with regular maintenance For the operation in Switzerland the SVGW regulation has to be observed. Therefore the plants for Switzerland are delivered with nylon protection stocking and silver resin part. Otherwise the plant is designed like the standard version! Nylon protective stocking/ fine salt: Normally, de-nitrating plants in Switzerland are run with fine salt, instead of salt tablets. WatPass® Nitrate 10000 plants that we deliver to Switzerland are therefore equipped with a nylon protective stocking, so that you can operate the softening plants with fine salt. Thereby a blocking of the plant by the fine salt is excluded. Silver resin content ( min 2% ): The ion exchanger resin must contain a minimum of 2% silver resin. Design of the WatPass® de-nitrating systems A cabinet housing with removable lid, in which a GRP pressure bottle (filled with ion exchange resin) sits, forms the basis for the extremely low-maintenance Clack control valve with color display and German operation. This is a real innovation and makes your handling of the plant much easier. The system is, of course, volume-controlled. The innovative control head can be completely disassembled and maintained without tools. Regeneration - what is it? When the preset volume of water flow is reached, the regeneration of the resin is triggered at 02:00 at night. A reserve capacity is programmed by us as a safety factor in the device, so that nitrate-free water after reaching the preset water capacity, is available until regeneration. During regeneration, the nitrate unit automatically passes saline solution (sodium chloride) over the ion exchange resin. During this process, sodium ions (Na+) are again added to the resin. Nitrate is discharged with the saline solution through a separate drain connection. Now the resin is ready to be used again to de-nitrate your drinking water. During regeneration, the WatPass® Nitrate 10000 supplies untreated tap water so that the water supply is available. If the system is inactive (e.g. vacation), a forced regeneration is triggered every 10 days to prevent germination of the resin bed. How long does a filling of salt last? Depending on the nitrate content and your water consumption, one filling will last approximately 3-4 months, then new salt must be added. The integrated safety float valve protects you from overflowing water. Plant size and technical information The plant has a capacity of 315 grams of nitrate or 5.1 mol. The regeneration cycle depends on the water consumption and the nitrate content. We will be happy to advise you on the right plant size. WatPass® Nitrate 10000 with volume control Control valve: Clack WS 1CL IA with color display and German menu navigation as well as (EN, ES, FR,PL) Pressure tank type: 9x35 Resin capacity: 25 liters Salt consumption per regeneration: approx. 4,0 KG regeneration time: approx. 60 min Salt supply: 70 KG Block size (HxWxD): 1.140 x 320 x 500 mm Weight: 35 Kg Scope of delivery: Cabinet housing for one salt stock. A quantity-controlled central control valve type Clack WS 1 CI, with international menu guidance and color display. Integrated in the system, a GRP pressure bottle filled with high quality ion exchange resin. Installation conditions for all plant sizes: Drinking or raw water connection Socket 230 V / 50 Hz waste water connection pressure reducer at > 6 bar house water filter at the inlet connection thread: 1 inch frost-free place of installation The plant is delivered by forwarding agency. When ordering, please be sure to provide us with a telephone number where you can be reached upon delivery.  

The WatPass® Nitrate 4000 is a drinking water de-nitrator in a cabinet housing with multilingual menu navigation (D, EN, ES, FR, Pl), color display for faster recognition of the operating states & control head from Clack. It is a real innovation and works according to the ion exchange process. This process is the most established, for the removal of nitrate. The system produces an excellent sensory result and of course it removes the nitrate from your drinking water. The WatPass® Nitrat is particularly energy-saving! Due to the full salination, the filter medium is optimally regenerated and utilized. Advantages No recognizable nitrate contamination after the plant therefore better drinking water very low-maintenance, established technology Excellent price/performance ratio longevity, with regular maintenance For the operation in Switzerland the SVGW regulation has to be observed. Therefore the plants for Switzerland are delivered with nylon protection stocking and silver resin part. Otherwise the plant is designed like the standard version! Nylon protective stocking/ fine salt: Normally, de-nitrating plants in Switzerland are run with fine salt, instead of salt tablets. WatPass® Nitrate 4000 plants that we deliver to Switzerland are therefore equipped with a nylon protective stocking, so that you can operate the softening plants with fine salt. Thereby a blocking of the plant by the fine salt is excluded. Silver resin content ( min 2% ): The ion exchanger resin must contain a minimum of 2% silver resin. Design of the WatPass® de-nitrating systems A cabinet housing with removable lid, in which a GRP pressure bottle (filled with ion exchange resin) sits, forms the basis for the extremely low-maintenance Clack control valve with color display and German operation. This is a real innovation and makes your handling of the plant much easier. The system is, of course, volume-controlled. The innovative control head can be completely disassembled and maintained without tools. Regeneration - what is it? When the preset volume of water flow is reached, the regeneration of the resin is triggered at 02:00 at night. A reserve capacity is programmed by us as a safety factor in the device, so that nitrate-free water after reaching the preset water capacity, is available until regeneration. During regeneration, the nitrate unit automatically passes saline solution (sodium chloride) over the ion exchange resin. During this process, sodium ions (Na+) are again added to the resin. Nitrate is discharged with the saline solution through a separate drain connection. Now the resin is ready to be used again to de-nitrate your drinking water. During regeneration, the WatPass® Nitrate 4000 supplies untreated tap water so that the water supply is available. If the system is inactive (e.g. vacation), a forced regeneration is triggered every 10 days to prevent germination of the resin bed. How long does a filling of salt last? Depending on the nitrate content and your water consumption, one filling will last approximately 3-4 months, then new salt must be added. The integrated safety float valve protects you from overflowing water. Plant size and technical information The plant has a capacity of 200 grams of nitrate or 3,2 mol. The regeneration cycle depends on the water consumption and the nitrate content. We will be happy to advise you on the right plant size. WatPass® Nitrate 4000 with volume control Control valve: Clack WS 1CL IA with color display and German menu navigation as well as (EN, ES, FR,PL) Pressure tank type: 10x17 Resin capacity: 10 liters Salt consumption per regeneration: approx. 1,6 KG regeneration time: approx. 60 min Salt supply: 40 KG Block size (HxWxD): 1.010 x 320 x 500 mm Weight: 20 Kg Scope of delivery: Cabinet housing for one salt stock. A quantity-controlled central control valve type Clack WS 1 CI, with international menu guidance and color display. Integrated in the system, a GRP pressure bottle filled with high quality ion exchange resin. Installation conditions for all plant sizes: Drinking or raw water connection Socket 230 V / 50 Hz waste water connection pressure reducer at > 6 bar house water filter at the inlet connection thread: 1 inch frost-free place of installation The plant is delivered by forwarding agency. When ordering, please be sure to provide us with a telephone number where you can be reached upon delivery.