Water Vortex - Following Nature's Example

Filter cartridges produced by CARBONIT® in cooperation with Prime Inventions combine water filtration with water taste improvement. A special EM ceramic is added to the activated carbon filter during the sintering process. Among other things, this ceramic reduces the surface tension of the water and the size of the cluster structures. As an absolute highlight, a water turbulence unit was installed in the cartridge. This means that most people describe the taste of the water as softer or rounder. Experience the first Carbonit filter cartridge with integrated turbulence! Based on the already proven cartridge EM Premium D, the EM Aquawhirler has an integrated whirling unit. This consists of high-quality POM material and is bacteria-repellent thanks to its special coating. This means that the risk of re-infection into the filter cartridge can be largely eliminated. The EM Aquawhirler filter cartridge has a mechanical filter fineness of < 0.7 µm and a very high chemical-physical adsorption performance against chemical substances. The addition of approx. 5% EM ceramic gives it special properties. The filter cartridge is ideal for all customers who cannot or do not want to connect a water vortex to their faucet. By replacing the filter cartridge, you always have a clean new whirler. In the filter cartridge the whirling unit is integrated in the existing carbon block. Service life The filter cartridge must be replaced after 6 months (according to DIN 1988). In principle, 10,000 litres of water may be filtered within the 6 months. However, an earlier change may be necessary if the water flow is noticeably reduced. Early replacement is not a defect in the filter used, but an indication of the increased occurrence of fine particles in unfiltered water.   Use only with cold water. Protect from frost.

The Whirlator® washbasin is the perfect solution for use in the kitchen, bathroom or wherever else you want to use it. It is characterised by its excellent whirling performance. A special vortex chamber system ensures the greatest possible turbulence of the flowing water in the smallest possible space. Well-known natural scientists have seen the basis for optimal water quality in the vortex movement of the water, following the example of nature. The particularly simple installation is another feature of this water mixer. The Whirlator is screwed to the existing water tap, ready! If you want tasty and especially soft drinking water in a quality similar to spring water, the Whirlator is perfect for you. In addition, air mixers and jet regulators remain visible for a longer period of time, which promotes a sustainable preservation of the value of these installations. The Whirlator® washbasin can be fitted out throughout the home at a particularly favourable price. This means that swirling water is available everywhere. Connection: Size: M 24 x 1 external thread (internal thread on water tap) incl. standard adapter from M 24 x 1 to M 22 x 1 I-I (external thread M 22 x 1 on water tap) - for easy screwing to the water tap. The appliance can be screwed to any tap in the bathroom or kitchen with M 24 x 1 internal thread or M 22 x 1 (with enclosed adapter) for the removal of drinking or washing water from the tap. Areas of application: in bathrooms, kitchens, hotels and restaurants, as well as in the service industry, e.g. hairdressers, wellness oases and in all sanitary facilities of hospitals, old people's homes, dormitories, kindergartens and schools.

The water swirler in the original form Use on water filters, taps and reverse osmosis systems: Due to the design, a good turbulence is ensured even at low water volumes and it is therefore ideal for table water filters with low water flow and reverse osmosis systems (from about 2,0 l water per minute). The water flow or turbulence can be adjusted with a standard screwdriver from below (after the jet regulator has been unscrewed) through the water outlet opening. New filter cartridges initially allow more water to flow through - this flow decreases in the course of use by the retained particles in the filter. Due to the infinitely variable regulation, you can turn back the water output at the beginning and readjust if necessary. By default, the water flow is set to maximum. High quality material: The Swirl-Egg is made entirely of high quality, according to the drinking water standard, stainless steel. Using low pH water (e.g., reverse osmosis water) will not cause corrosion. Additional energizing possible:Optionally, a variety of energizing media, such as rock crystals, corals, etc., can be filled into the energizing chamber. Prime Inventions offers you the gemstone mixture E1, containing six different types of gemstones. Connection options:The Swirl-Egg can be connected to a M22x1 external fine thread. Easy cleaning:The Swirl-Egg can even be cleaned in the dishwasher. The Vitalizing media are to be taken out before.  

The gemstone mixture is specially tuned to Aquawhirler Piccolo and the Swirl-Egg, you can of course also use it elsewhere. Optionally, a variety of Energetisierungsmedien such as rock crystals, corals, etc. can be filled in the vortex chambers of the housing. We have put together the following gemstone mixture for you:Rock crystal, Amethyst, Carnelian, Red Jasper, Orange Calcite, Rose Quartz Alternatively, you can fill the chamber with a set of 7 quartz balls. Care: Boil the energizing media with hot water as needed.

Aquawhirler Piccolo for compact faucets and especially for three-way faucetsThe AW Piccolo is made entirely of high quality stainless steel compliant with the drinking water standard. Using low pH water (eg reverse osmosis water) will not cause corrosion.Additional water revitalizationOptionally and additionally, a wide variety of energization media, such as rock crystals, corals, etc., can be filled into the swirl chamber of the housing.We offer you a gemstone mixture containing six different gemstones (rock crystal, amethyst, carnelian, red jasper, orange calcite, rose quartz). Alternatively, you can fill the chamber with a set of 7 quartz balls.Due to the design, a good turbulence is ensured even at low water volumes and it is therefore ideal for operation with table water filters with low water throughput and reverse osmosis systems (from approx. 1.3 l water per minute).The water flow rate or turbulence can be adjusted with a screwdriver from below (after the jet regulator has been unscrewed) through the water outlet opening.Note:New filter cartridges initially allow more water to flow through - this flow decreases over the course of use, due to the retained particles in the filter, more and more. Stepless control means that you can always optimally adjust the Picollo. On delivery, the water flow is set to maximum. The water outlet takes place as a straight stream and not in bell shape as in a traditional swirler. Therefore, no water injected laterally, inside the water swirls anyway.Maintenance:The AW Piccolo can even be cleaned in the dishwasher. Please remove the vitalizing media and sealing rings before use.connection optionsThe Piccolo can be connected directly to a M22x1 external fine thread, alternatively with enclosed adapter also on a M24x1 internal thread. The thicker side is screwed into the faucet.

The Whirlator® for the shower is the perfect solution for use in the bathroom. It is characterized by an excellent turbulence performance. A special vortex chamber system, ensures in the smallest space, for maximum turbulence of the flowing water. Well-known naturalists have modeled on nature, in the whirling motion of the water, as the basis for optimal water quality. The particularly simple installation is another feature of this water swirler. The whirlator is screwed to the existing shower installation (sequence: mixing faucet - adapter hose - shower head), ready! If you want extra soft water in spring water quality, the Whirlator is perfect for you. In addition, the shower head remains more attractive for a longer time, which promotes sustainable value retention of these installations. Due to the particularly low price you can equip the Whirlator® the entire house. Thus, one has at each shower head (for example, also on the bathtub) swirled water available. Body care & relaxation Every day we come into contact with water when we wash, shower, bathe or even shave. Often the skin is irritated and it creates a feeling of tension. The water refined with Whirlator® technology can prevent this irritation. Your skin feels softer. Due to the higher water solubility you need less shampoo, shower gel or shaving soap. Not only the skin but also our environment! You should treat yourself to this daily wellness for the home. Whether after getting up or after a hectic everyday life, when showering or bathing you experience the great feeling of Whirlator® water. A pleasure for body and mind - simply good. Certificates in combination: TÜV, DIN ISO certified, Hygieneinstitut Gelsenkirchen, parts according to DVGW guidelines Connection: G ½ '' - G ½ '' I-A (internal and external thread) for the connection to the fitting and the shower hose or alternatively the Whirlator shower adapter DAC 120 to the hand shower and the shower hose. Also suitable for G ½ '' washing and dishwasher connection. Areas of application: in bathrooms, hotels and the service industry, e.g. Hairdressers, wellness oases and in all sanitary facilities of hospitals, old people, dormitories, kindergartens and schools.

Stainless steel outlet pipe for connection of water swirlers to Auftischfiltergehäuse such as the AquaAvanti Mercuro. The tube is made of high quality, brushed stainless steel VA. Suitable for example for:      EggyWhirler      Aquawhirler Piccolo

The EM-X ceramic ball set is specially matched to the Aquawhirler Piccolo water swirler and the swivel egg, you can of course also use it for other purposes. A wide variety of energizing media such as rock crystals, corals etc. can be filled into the swirl chambers of the housing. EM-X ceramic ball set is consisting of nine ceramic balls. The set is suitable for upgrading your water quality. Alternatively, you can fill the chamber with a set of gemstones or quark balls. Care: Boil the energizing media with hot water if necessary. Made in Japan

The Whirlator® HC 340 is installed on the main water pipe in detached houses, apartment buildings, residential complexes, retirement homes, hospitals and reduces maintenance and consumption in water-bearing systems such as washing machines and dishwashers, fittings, toilet cisterns. Lime deposits can be reduced. The water treated by the Whirlator® HC 340 increases the well-being of many people, animals and also very often improves the growth of plants in complete supply areas. Why use a Whirlator®? The water treated by the water supply companies is compressed and pumped under high pressure through the supply pipes until it arrives at your home. The water is often denatured due to different loads and treatments. With the unique Whirlator technology, the treated water is brought back to the state of a high-energy, natural spring water, decompressed and renatured. Back to the original state to unfold its natural power freely again. The rotation of nature The main feature of the whirlator technology is the unique vortex chamber system, which achieves the greatest possible turbulence of the water in the smallest possible space. The resulting high flow velocity of the water ensures the constant functionality of this technology. About a hundred years ago, renowned natural scientists recognized the basis for positive life energies in the vortex movement of water, based on the model of nature. Advantages of the Whirlator         operate without electricity or other energy supply         only works by utilizing the existing line pressure of existing systems         no addition of chemical substances necessary         maintenance-free Why use a Whirlator®?         Saving water and energy         Cost savings through lower maintenance costs and value retention of existing technical plants and systems         longer service life of pipes, fittings that come into contact with water         Significant reduction of limescale deposits and stains         Time and labour savings due to less cleaning effort         lower surface tension of the water, whereby shampoo, detergents and cleaning agents can be saved         to improve water quality  

The Aquawhirler INLINE is specially designed for use in confined spaces such as under the sink or shower. The case of the new Aquawhirler INLINE is made of high quality V4A stainless steel. The turbulence is created using Prime Inventions' latest turbulence technology using the innovative Aquawhirler spheres (Patent pending Veröffentlichungsnummer WO 2017/084711 A1). Through a variety of small, specially milled into the glass spheres Verwirbelungsvertiefungen arise when flowing around many small turbulence in the water. In nature, in rivers and streams, the water is swirled by the flow of stones and thus upgraded. It creates fresh, natural water. The Aquawhirler INLINE completes this process of natural turbulence of the water with the help of the Aquawhirler balls and thus produces fresh natural water at your home at the tap. Applications     Connection ideal in the shower directly to 1/2 "wall connection (with adaptation A4)     behind water filter systems under the sink (adaptation depending on the system connection)     in front of the washing machine Connections Inlet / outlet 1/2 "female thread There are standard two reducing nipples on 3/8 "stainless steel Delivery     Adaptation A1 (inclusive): 2 pieces reducing nipple 1/2 "- to 3/8" from V4A for connection to standard armored hoses for connection to z. B. CARBONIT® Vario and others.     A mix of Aquawhirler balls with vortex surfaces and Aquawhirler balls smooth Additional available adaptations A2: 2 pieces JohnGuest adapter 3/8 "IG - 3/8" JG hose connection for connection to eg. B. AquaAvanti Inline, or reverse osmosis systems with 3/8 "hoses such as AquaAvanti Osmo. A3: 2 pieces adapter 3/8 "IG - 1/4" JG hose connection for connection to reverse osmosis systems with 1/4 "hoses. A4: 1 piece double nipple 1/2 "IG - 1/2" female thread from V4A for connection to the shower hose. The other side of the whirler is screwed directly to the shower wall connection. A5: 2 pieces reducing nipple 1/2 "- 3/4" for connection to the washing machine.

Aquawhirler Vortex UT-380 for angle valves and designer fittings. The AW Piccolo is made entirely of high-quality stainless steel that complies with the drinking water standard. If water with a low pH value (e.g. reverse osmosis water) is used, there is no corrosion.   Additional water revitalization A wide variety of energizing media such as rock crystals, corals, etc. can optionally and additionally be poured into the swirl chamber of the housing. We offer you a gemstone mix that contains six different types of gemstones (rock crystal, amethyst, carnelian, red jasper, orange calcid, rose quartz). Alternatively, you can fill the chamber with a set of 7 quartz balls. Due to the design, good turbulence is guaranteed even with low amounts of water and it can therefore be ideally operated on table water filters with little water throughput and reverse osmosis systems (from approx. 1.3 l water output per minute). You can adjust the water flow rate or the turbulence yourself with a screwdriver from below (after the jet regulator has been unscrewed) through the water outlet opening. Note: New filter cartridges initially allow more water to flow through - this flow decreases more and more in the course of use, due to the particles retained in the filter. Thanks to the stepless control, you can always optimally adjust the swirler. In the delivery condition, the water flow is set to maximum. The water emerges as a straight jet and not in the shape of a bell as in a vortex. Therefore, no water splashes sideways, the water still swirls inside.

The Aquawhirler vortex bell for water swirling, is a blessing for your stressed water. He revives your drinking water in perfection! By using the Aquawhirler vortex bell, your tap water tastes milder and fresher, as if from a natural source. The water is enriched with oxygen and the bound CO2 in the water is reduced by the turbulence. This makes your water easier to digest. Food and drinks can taste better and more natural through the use of the "vortex bell". You save water through the use, since in the exiting vortex the water surface is increased. Used as a shower head, the Aquawhirler vortex bell stimulates, it feels like being under a waterfall. With the additionally available gemstone mixes you add value to your water. The infinite adjustment of the water flow rate allows a water outlet from the vortex bell, adjusted to the water pressure in your home. Useful information Our drinking water usually lacks the form of movement of turbulence. In the piping systems of our drinking water, water pressure keeps the water moving and stagnates in some pipes. In addition, the drinking water still reacts to external influences such as electrosmog. The Aquawhirler vortex bell mimics the natural turbulence of the water, as in rivers and natural streams. The specially developed vortex unit swirls the water in a small space as it does outdoors. The water immediately tastes fresher and more natural. Installation Upon delivery, the Aquawhirler vortex bell is set to the highest possible water flow. Regulate the amount of water and turbulence by turning the externally accessible adjusting screw, after installation, according to your wishes. The water does not then emerge as a vortex bell, but straight. Of course, the water is still swirling.

Adaptations A2 for Aquawhirler AW 26 The set contains 2 x JohnGuest Adapters 3/8 "IG - 3/8" JG hose connection for connection to AquaAvanti Inline, or reverse osmosis systems with 3/8 "hoses such as AquaAvanti Osmo.

Adaptations A2 for Aquawhirler AW 26 The set contains 2 x JohnGuest Adapters 3/8 "IG - 3/8" JG hose connection for connection to AquaAvanti Inline, or reverse osmosis systems with 3/8 "hoses such as AquaAvanti Osmo.

The ideal water vortex for all customers who do not want to connect a water vortex to the tap The Aquawhirler Inline (AW-9VA) is similar in structure to the AW-26. Both are installed in the water pipe after the under-sink filter, before the Faucet mounted. The perfect spot for installation is directly at the entrance of the filter faucet. The The housing of the AW-9VA is made of high quality stainless steel and already has a tap adapter with UNS 7/16 "-24 thread (standard for many water filter systems) with it. Without an adapter, it can be easily connected to taps with a standard 3/8 “thread connect. On the entrance side there is a 3/8 “male thread for standard flexible hoses. The swirl is done with the specially developed swirl insert (similar to AWPerlo). Immediately after the vortex insert is a second insert for water treatment media integrated. This is standard with rose quartz, amethyst and rock crystal stones filled. It is possible to open them and make your own fillings. Both missions can be taken out. For hygienic reasons, the vortex insert should be used and change the gem chamber annually. Alternatively, the inserts can also be cleaned in the Dishwasher (up to max. 70 degrees max. approx. 3 x)

Adaptation A4 for Aquawhirler AW 26 The set contains 1 double nipple 1/2 "inner thread - 1/2" female thread made of V4A for connection to the shower hose. The other side of the whirler is screwed directly to the shower wall connection.

Adaptation A4 for Aquawhirler AW 26 The set contains 1 double nipple 1/2 "inner thread - 1/2" female thread made of V4A for connection to the shower hose. The other side of the whirler is screwed directly to the shower wall connection.