Main and enhancement filter level AA inline (two-stage) Sediment & EM Premium 5

Main and extension filter stage (two-stage under-table system) of the Aqua Avanti inline series with quick-change housings.

The main filter level is the basic system, the extension filter level is switched on. The filter stages are switched in the selectable order (please do not swap them) before the drinking water is removed; All standard connections, hoses and connections are included.

Description of the Aqua Avanti Inline system

Forget about dismantling and screwing on filter housings for filter replacement. With the AA inline filter system you can change the filter cartridges in seconds. Simply remove the filter cartridge by turning it to the left and, conversely, insert a new filter cartridge. Finished. You do not need a case key anymore. Since you do not come in contact with the interior of the filter cartridge, the exchange is very hygienic.

Connections: Standard connection set (included): The enclosed tap adapter has a 3/8 "standard thread and thus fits the taps offered. An adaptation to other threads z. B. UNS 7 / 16-24 is optional.

For easy connection to the corner tap under the sink, a high-quality European connection adapter JG ASV-7 is supplied with each main filter stage.

As an alternative to the enclosed connection set, you can select the "AA Inline installation set " (must be purchased separately) in the Accessories & Spare Parts category. This facilitates the laying and connection of the hoses in difficult installation situations under the sink. It consists of: 2x plug connector PP221212W, 2x angled plug PP0312W, adhesive dots for screwing on, hose 1,5m.

Description of the selectable filters

EM Premium 5 Inline

Combination of water filtration and water revitalization in a filter cartridge

It has been possible to build the successful filter cartridge EM Premium 5 as an inline quick-change system. The filter and aeration characteristics of the water are identical for both filter cartridges. The EM ceramic is "baked in" into the filter cartridge during production as a powder. This creates a very large contact surface with the water. Together with the proven filter performance of the Carbonit NFP Premium filter technology results in the ideal water filtration. Among other things, this ceramic reduces the surface tension of the water and reduces the size of the cluster structures. Thus, the taste of the water is described by most people as softer or rounder.

Filter change: Close the water supply valve, unscrew the old filter cartridge in a clockwise direction and pull it downwards. Insert the new filter cartridge from below and screw it in counterclockwise until it stops. Reopen the water supply.

Use: The filter cartridge must be changed after six months. In principle, up to 10.000 liters of water may be filtered during this time. An earlier change may, however, be necessary if the water flow is noticeably reduced. This is usually an indication of increased occurrence of fine particles in unfiltered water. The water flow is now about 2 liters / min. Use only with cold water, protect against frost.

Weight: 830gr

EM IFP Premium 5 Inline

This filter cartridge was manufactured by CARBONIT® based on NFP Premium exclusively for the company Prime Inventions. Due to the mechanical filter fineness of <0.45 µm, it has a high chemical-physical adsorption performance against chemical substances. The addition of EM ceramic gives it special properties. Among other things, this ceramic reduces the surface tension of the water and reduces the size of the cluster structures. Thus, the taste of the water is described by most people as softer or rounder.

The filter cartridges type IFP Premium are ideal for the retention of possible pollutants in drinking water systems.

Pollutants of anthropogenic origin, which could accumulate in the organism, are reliably removed and stored. The IFP activated carbon filter block has a commercially available, thin wall for liquid treatment at low line pressure.

Use: The filter cartridge must be changed after six months. In principle, up to 5.000 liters of water may be filtered during this time. An earlier change may, however, be necessary if the water flow is noticeably reduced. This is usually an indication of increased occurrence of fine particles in unfiltered water. The water flow is now about 4 liters / min. Use only with cold water, protect against frost.

Weight: 770 gr.

Decalcification Inline

The flowed through ion exchange resin reduces the hardness of the water. The decalcifying cartridge improves the taste of cold and hot drinks (especially to improve the aroma of coffee and tea) and protects household appliances against calcification.

Use: The water flow should not exceed about 2 l / min. so that a noticeable descaling is guaranteed. The possible duration of use depends on the degree of hardness of the input water. Depending on the raw water hardness up to 1,900 l (hardness 5-10 dh) or 450 l (degree of hardness 11-25 dh) can be achieved as static quantity. The cartridge must be changed, if the typical chalk appearances like a film is built on the surface of the tea beverage, loss of tea aroma / coffee or calcification deposits on surfaces.

According to DIN 1988, a change is required after 6 months at the latest.

Anti-limescale  Inline

Use for chemical-free limescale protection in the Aqua-Avanti (Aqua Kalko) Inline Filter System. The flowed through catalyst granule works on the seed crystal principle. This precipitate lime is bound to the seed crystals and floats in the water with away. The procedure serves to protect the line and devices. Limescale deposits are easier to remove after use but removal of the lime does not take place.

Use: The water flow should not exceed approx. 3 l / min. When used with water in drinking water quality, the catalyst granules sustains about 3 years.

Sediment filter Inline

The sediment filter Inline is provided with an antibacterial protection. Due to the special winding, the protection is distributed over a very large area. Upon contact of germs with the protective surface of their propagation process is interrupted. Textile coarse and prefilter e.g. for removal of heavily particulate polluted or polluted (turbidity) input water. Water that contains a high proportion of sediments affects the visual value of beverages and can in the worst case have a damaging effect on your system components.

Use: The filter cartridge must be changed after six months. In principle, up to 10.000 liters of water may be filtered during this time. An earlier change may, however, be necessary if the water flow is noticeably reduced. The water flow is now up to 20 liters / min depending on water pressure and filter housing.

Protect from frost.