Dosing agent DL-2 from Syr 10 L
109,90 €
Tilgængelig, leveringstid: 21 Tage
Produktinformation "Dosing agent DL-2 from Syr 10 L"
With the mineral solutions DL 1 and DL 2, two different solutions from SYR are available.
The mineral solutions prevent corrosion and limescale formation, raise the pH value of the water or are used, for example, after a softening system or to stabilize the hardness of the water in copper or galvanized pipelines as well as in mixed installations. The dosing unit meets the requirements of DIN 19635.
Here we offer the DL 2 variant.
The mineral dosing solutions DL 1 and DL 2 are approved drinking water additives and meet the requirements of the Foodstuffs Act, the Additives Ordinance and the Drinking Water Ordinance. They contain phosphates and silicate combinations designed to protect drinking water systems. The special phosphates prevent corrosion and rust water formation and stabilize water hardness. Phosphate is an essential mineral for the human body and occurs naturally in many foods. The phosphate used in the solutions meets the strict requirements of DIN/EN and is highly pure. The daily requirement of an adult is 700 mg of phosphate. On average, we consume 1,092 g of phosphate per day with dairy products and approx. 1,068 g with meat and sausage. By comparison, if phosphate is added to drinking water by means of a dosing solution, only 4 mg is consumed daily.
Which dosing solution is the right one for me?
- DL1 (hardness stabilization + corrosion protection ) is used for hardness levels > 14 °dH without a water softening system.
- DL2 (corrosion protection) is used for hardness levels < 14 °dH with a water softener.
Hans Sasserath GmbH & Co. KG
Mühlenstrasse 62
41352
Korschenbroich
Deutschland
sasserath@syr.de
Related items
Inoculation piece & connection set for dosing pump SYR NeoDos 3100 Connect (Stand -Alone) from the German manufacturer SYR. The component is only needed if you want to use the dosing pump without the SYR water softeners. With the SYR dosing pump NeoDos 3200 Connect, mineral solutions are added to the drinking water. The mineral solutions prevent corrosion and limescale formation, raise the ph-value of the water or are used e.g. after a softening system or to stabilize the hardness of the water in copper or galvanized pipelines as well as mixed installations. The dosing system meets the requirements of DIN 19635. The NeoDos Connect dosing pump detects the flowing water volume by means of a water meter and thus determines the addition of minerals from the dosing tanks, which are pumped into the pipe via the dosing hose. Optional dosing solutions can also be found in our store. Important information for ordering For use without a water softener (stand alone), the "Inoculation piece incl. connection set" must be ordered in the correct nominal width DN 20-DN 32: DN 20 DN 25 DN 32 Alternatively, when operating with a water softener (LEX Plus 10 Connect series and Neosoft), you need the Lex Plus / Neosoft connection set (3100.00.011). More information can be found in the operating instructions, which can be found at the article under Downloads.
Inoculation piece & connection set for dosing pump SYR NeoDos 3100 Connect (Stand -Alone) from the German manufacturer SYR. The component is only needed if you want to use the dosing pump without the SYR water softeners. With the SYR dosing pump NeoDos 3200 Connect, mineral solutions are added to the drinking water. The mineral solutions prevent corrosion and limescale formation, raise the ph-value of the water or are used e.g. after a softening system or to stabilize the hardness of the water in copper or galvanized pipelines as well as mixed installations. The dosing system meets the requirements of DIN 19635. The NeoDos Connect dosing pump detects the flowing water volume by means of a water meter and thus determines the addition of minerals from the dosing tanks, which are pumped into the pipe via the dosing hose. Optional dosing solutions can also be found in our store. Important information for ordering For use without a water softener (stand alone), the "Inoculation piece incl. connection set" must be ordered in the correct nominal width DN 20-DN 32: DN 20 DN 25 DN 32 Alternatively, when operating with a water softener (LEX Plus 10 Connect series and Neosoft), you need the Lex Plus / Neosoft connection set (3100.00.011). More information can be found in the operating instructions, which can be found at the article under Downloads.
Inoculation piece & connection set for dosing pump SYR NeoDos 3100 Connect (Stand -Alone) from the German manufacturer SYR. The component is only needed if you want to use the dosing pump without the SYR water softeners. With the SYR dosing pump NeoDos 3200 Connect, mineral solutions are added to the drinking water. The mineral solutions prevent corrosion and limescale formation, raise the ph-value of the water or are used e.g. after a softening system or to stabilize the hardness of the water in copper or galvanized pipelines as well as mixed installations. The dosing system meets the requirements of DIN 19635. The NeoDos Connect dosing pump detects the flowing water volume by means of a water meter and thus determines the addition of minerals from the dosing tanks, which are pumped into the pipe via the dosing hose. Optional dosing solutions can also be found in our store. Important information for ordering For use without a water softener (stand alone), the "Inoculation piece incl. connection set" must be ordered in the correct nominal width DN 20-DN 32: DN 20 DN 25 DN 32 Alternatively, when operating with a water softener (LEX Plus 10 Connect series and Neosoft), you need the Lex Plus / Neosoft connection set (3100.00.011). More information can be found in the operating instructions, which can be found at the article under Downloads.
Inoculation piece & connection set for dosing pump SYR NeoDos 3100 Connect (Stand -Alone) from the German manufacturer SYR. The component is only needed if you want to use the dosing pump without the SYR water softeners. With the SYR dosing pump NeoDos 3200 Connect, mineral solutions are added to the drinking water. The mineral solutions prevent corrosion and limescale formation, raise the ph-value of the water or are used e.g. after a softening system or to stabilize the hardness of the water in copper or galvanized pipelines as well as mixed installations. The dosing system meets the requirements of DIN 19635. The NeoDos Connect dosing pump detects the flowing water volume by means of a water meter and thus determines the addition of minerals from the dosing tanks, which are pumped into the pipe via the dosing hose. Optional dosing solutions can also be found in our store. Important information for ordering For use without a water softener (stand alone), the "Inoculation piece incl. connection set" must be ordered in the correct nominal width DN 20-DN 32: DN 20 DN 25 DN 32 Alternatively, when operating with a water softener (LEX Plus 10 Connect series and Neosoft), you need the Lex Plus / Neosoft connection set (3100.00.011). More information can be found in the operating instructions, which can be found at the article under Downloads.
Connection set for dosing pump SYR NeoDos 3100 Connect from the German manufacturer SYR. The component is only needed if you want to use the dosing pump without the SYR water softeners. With the SYR NeoDos 3200 Connect dosing pump, mineral solutions are added to the drinking water. The mineral solutions prevent corrosion and limescale formation, raise the ph-value of the water or are used e.g. after a softening system or to stabilize the hardness of the water in copper or galvanized pipelines as well as mixed installations. The dosing system meets the requirements of DIN 19635. The dosing pump NeoDos Connect detects the flowing water quantity by means of a water meter and thus determines the addition of minerals from the dosing tanks, which are pumped into the pipe via the dosing hose. Optional dosing solutions can also be found in our store. Important information for ordering For use without a water softener (stand alone), the "injection piece incl. connection set" must be ordered in the correct nominal width. DN 20 DN 25 DN 32