WatPass® Nitrate & Hardness 4000
1.249,00 €
Tilgængelig, leveringstid: 1-3 Tage
Produktinformation "WatPass® Nitrate & Hardness 4000"
WatPass N&H 4000 - nitrate filtration and water softening system in cabinet housing.
This plant is a real innovation. The increasingly recognized problem of high nitrate levels in our drinking water finds with this plant the ideal solution for areas where the lime content of the water is also too high. The treatment of these two tasks, in one plant, is rarely found. We know of no other system that can do this. In addition, there is the comfortable operation by the high-quality Clack control head of the latest generation, with color display and multilingual menu guidance (DE, EN, ES, FR and PL). This is particularly low-maintenance, DIYers can usually replace the seals themselves. We recommend this approximately every 24 months.
Removing nitrate from water in particular is currently the greatest challenge in water treatment. Known solutions with filter cartridges or reverse osmosis systems are very complex and expensive due to the high follow-up costs. With the innovative WatPass N&H 4000 combination system you can free your well or house water from nitrates and reduce the hardness to a reasonable level in a very cost-effective way.
The filter media in the system, 10 liters for softening and 7.5 liters for denitrification (capacity 150g nitrate or 2.4 mol nitrate), are automatically and regularly regenerated. Due to the voluminous salt tank, you need to replace salt relatively rarely.
Combination unit WatPass N&H 4000 consists of:
A cabinet housing for a salt supply of max. 70kg. A quantity-controlled central control valve type Clack WS 1 CI IA, as well as an integrated fine cutting valve. Suction device and connection line to the central control valve. Integrated in the system, a GRP pressure bottle filled with high quality ion exchange resin.
Installation conditions:
-Drinking or raw water connection
-Socket 230 V / 50 Hz
-waste water connection
-pressure reducer at > 6 bar
-house water filter at the inlet
-connection thread: 1 inch
Performance data:
For households up to: 2-4 pers.
Capacity at 10°dH*: 4.000 L
Capacity at 15°dH*: 3.000 L
Capacity at 20°dH*: 2.000 L
Nominal flow**: 1,2 m3/h
nominal flow***: 0,4 m3/h
max. raw water flow pressure: 6.0 bar
min. Raw water flow pressure: 2.6 bar
Pressure loss at max. flow: 0.6 bar
Salt consumption per regeneration: 3.0 kg
Regeneration time: 60 min.
For installations according to DVGW guidelines, a DVGW-certified pipe isolator must be installed, if desired. This can be obtained from your installer. The plant is also available with other capacities, if required, please contact us.
The plant is delivered by forwarding agency. When ordering, please be sure to provide us with a telephone number where you can be reached upon delivery.
* until the next regeneration
** according to DIN 19636 (20°dH to 8°dH)
*** from 20°dH to 0,5°dH (40 BV/h)
Physical data cabinet housing:
Cabinet height: 1,140 mm
Cabinet width: 320 mm
Cabinet depth: 500 mm
Maximum salt supply: 70 kg
Physical data GRP pressure bottle:
GRP pressure bottle type: 8 inches x 35 inches
Resin content: 10 liters of old softening granules
7,5 liters of denitration granulate (Capacity 150g nitrate or 2,4 mol nitrate)
Control head: Clack WS 1 CI IA
Water connections: 1 inch AG
Waste water connection: 12 mm
Electrical properties and conditions:
Power consumption: 3 watts
Electrical connection: 230/50/24 V.
Max. Water temperature: 30 ° C
Weight of the entire system: 28 kg
Ladenkiste UG (haftungsbeschränkt)
Bahnhofstr.
34286
Spangenberg
Deutschland
kontakt@wasserfilter-zentrum.de
Related items
The assembly block is suitable for the AquaAvanti IronGo iron filter and manganese filter AquaAvanti ManganGo or where a bypass is needed. If there is limited space at the point of connection, the use of a mounting block is ideal. For safety reasons, it may be desirable to be able to bridge the device unit. For such cases, the mounting block (bypass) is ideal. The installation of a mounting block usually takes about one hour. Your installer will surely make you an offer. If you are not sure if you need a mounting block just ask him. The mounting block is working that way Position 1 When the two outer taps are closed and the middle tap is open, the water flows past the connected device (eg AquaAvanti Iron GO or AquaAvanti ManganGo). Position 2 If the two outer cocks are open and the middle closed, all the water flows through the connected devices. Note: If it is necessary to bridge the units, simply return the mounting block to position 1.
The connection set is suitable for the disinfestation systems AquaAvanti IronGo (except EV-B1 and EW-B1) and equipment for manganese removal such as AquaAvanti ManganGo (except models with 3,3m³/h and 4,4m³/h flowrate) or just as it is needed. Delivery The connection set 1 inch contains: 2x armored hose DVGW 1 "ÜMxÜM, L-1.000mm, drain hose and overflow hose each 1.500mm, 1/2" hose clamp, 4 gaskets
The set is tool-free and very easy to use during routine maintenance. We recommend to do this every 24 months. It fits all Clack WS 1 CI control heads no matter where they are used. Scope of delivery: Main piston seal cage, main piston & bowl
Total Hardness Test set for easy determination of German water hardness ° dH. Accurate measurement with simple titration method. If the indicator solution drips in 5 ml of your test water until it changes color, the water hardness ° dH can be determined very simply and exactly. Applicable for checking the function of hardening plants or decalcifying plants. Naturally also for softening cartridges or all other areas of application for which you want to quickly and easily determine the water hardness down to one degree of accuracy. Prior knowledge by the user is not required. Have fun with determining your water hardness!