Clack Twin CI Valve DF Meter KIT - VTT1CIDME-03*

Clack twin valve control head of the latest generation, specially adapted to the European market. The control head is very low maintenance and extremely easy to maintain!

Here in the configuration: Clack Twin CI Valve DF Meter KIT CI - Vol - DF / EU Transfo / 1" Connection / Std Pipe / No DLFC / - / Injector E

With it you can control water softening plants and also water treatment plants for deferrization, demanganization, de-nitration and many more. Changing seals and pistons (maintenance kit) is extremely easy and takes less than a minute with a little practice. For us it is the number one control head on the market!

Regeneration types & Function of the control valve Clack WS 1 CI

Delayed volume controlled regeneration
The soft water consumption is measured by the integrated water volume meter. When the preset volume of soft water flow is reached, the unit does not regenerate immediately, but only at night at 02:00 (freely selectable).

Immediate volume controlled regeneration
The unit initiates regeneration immediately when the volume of softened water reaches zero.

Time controlled regeneration
The unit initiates regeneration when the number of days between two regenerations and the pre-programmed time are reached. The timed forced regeneration determines the number of days programmed between two regenerations.

In addition to one of the three regeneration types, a forced regeneration (manual) is also normally set. This setting is a kind of safety regeneration which only takes place if, for example, no regeneration has been carried out by the quantity control. This is necessary in case of longer absence (vacation). A contamination is thus counteracted with the forced regeneration.

Up to nine regeneration cycles can be selected. Here are the most frequently required ones:

• Rinse back                                           
• Salting and slow rinse   
• Quick rinse
• Fill brine tank

Due to the freely selectable cycles, a double rinsing process can be set, for example, which then promises greater efficiency.

Flow rate
With the Clack control head, a short-term maximum flow rate of up to 2x 6.0 m3/h is obtained, depending on the filter material or resin. The backwash capacity is identical.