Set 4x Tritan drinking bottle 1.0l with lid - BPA free, stable, easy to clean

The set contains one main and one extension filter stage (two-stage undersink system) of the Aqua Avanti Inline series with quick-change housings. The main filter stage is the basic system, the extension filter stages are switched on. The filter stages are connected in the selectable order (please do not interchange) before the drinking water intake; all standard necessary connections, hoses and fittings are included. Manufacturers are the companies Prime Inventions and Carbonit of an exclusive cooperation. Production takes place in Germany. Advantages of the Aqua Avanti Inline system compared to conventional filter housings Forget about dismantling and unscrewing filter housings to change filters. With the AA Inline filter system you can change filter cartridges in seconds. Simply remove the filter cartridge by turning it counterclockwise and insert a new filter cartridge the other way around. Done. You no longer need a housing key. Since you do not come into contact with the inside of the filter cartridge, the exchange is very hygienic. Connections (standard connection set is included) The included faucet adapter has a 3/8" standard thread and thus fits most of the faucets we offer. An adaptation to other threads e.g. UNS 7/16-24 is of course optionally possible. For easy connection to the corner tap under the sink, a high-quality European connection adapter JG ASV-7 is supplied with each main filter stage, so that you do not need an additional corner valve if you have a 3/inch cold water connection. Also a leakage protection is supplied, which provides you with additional safety. Additional accessories As an alternative to the enclosed connection set, you can find suitable adapters in the Accessories & Spare Parts category for easier, space-saving installation.  Optionally available are: - Plug-in connector - Adapter DM 3/8 inch to 3/8 inch 90 degree - 3/8 inch connection hose, AA inline filter   Description of the selectable filters EM Premium 5 Inline Combination of water filtration and water revitalization in a filter cartridge It has been possible to build the successful filter cartridge EM Premium 5 as an inline quick-change system. The filter and aeration characteristics of the water are identical for both filter cartridges. The EM ceramic is "baked in" into the filter cartridge during production as a powder. This creates a very large contact surface with the water. Together with the proven filter performance of the Carbonit NFP Premium filter technology results in the ideal water filtration. Among other things, this ceramic reduces the surface tension of the water and reduces the size of the cluster structures. Thus, the taste of the water is described by most people as softer or rounder. Filter change: Close the water supply valve, unscrew the old filter cartridge in a clockwise direction and pull it downwards. Insert the new filter cartridge from below and screw it in counterclockwise until it stops. Reopen the water supply. Use: The filter cartridge must be changed after six months. In principle, up to 10.000 liters of water may be filtered during this time. An earlier change may, however, be necessary if the water flow is noticeably reduced. This is usually an indication of increased occurrence of fine particles in unfiltered water. The water flow is now about 2 liters / min. Use only with cold water, protect against frost. Weight: 830gr EM IFP Premium 5 Inline This filter cartridge was manufactured by CARBONIT® based on NFP Premium exclusively for the company Prime Inventions. Due to the mechanical filter fineness of <0.45 µm, it has a high chemical-physical adsorption performance against chemical substances. The addition of EM ceramic gives it special properties. Among other things, this ceramic reduces the surface tension of the water and reduces the size of the cluster structures. Thus, the taste of the water is described by most people as softer or rounder. The filter cartridges type IFP Premium are ideal for the retention of possible pollutants in drinking water systems. Pollutants of anthropogenic origin, which could accumulate in the organism, are reliably removed and stored. The IFP activated carbon filter block has a commercially available, thin wall for liquid treatment at low line pressure. Use: The filter cartridge must be changed after six months. In principle, up to 5.000 liters of water may be filtered during this time. An earlier change may, however, be necessary if the water flow is noticeably reduced. This is usually an indication of increased occurrence of fine particles in unfiltered water. The water flow is now about 4 liters / min. Use only with cold water, protect against frost. Weight: 770 gr. Decalcification Inline The flowed through ion exchange resin reduces the hardness of the water. The decalcifying cartridge improves the taste of cold and hot drinks (especially to improve the aroma of coffee and tea) and protects household appliances against calcification. Use: The water flow should not exceed about 2 l / min. so that a noticeable descaling is guaranteed. The possible duration of use depends on the degree of hardness of the input water. Depending on the raw water hardness up to 1,900 l (hardness 5-10 dh) or 450 l (degree of hardness 11-25 dh) can be achieved as static quantity. The cartridge must be changed, if the typical chalk appearances like a film is built on the surface of the tea beverage, loss of tea aroma / coffee or calcification deposits on surfaces. According to DIN 1988, a change is required after 6 months at the latest. Anti-limescale  Inline Use for chemical-free limescale protection in the Aqua-Avanti (Aqua Kalko) Inline Filter System. The flowed through catalyst granule works on the seed crystal principle. This precipitate lime is bound to the seed crystals and floats in the water with away. The procedure serves to protect the line and devices. Limescale deposits are easier to remove after use but removal of the lime does not take place. Use: The water flow should not exceed approx. 3 l / min. When used with water in drinking water quality, the catalyst granules sustains about 3 years. Sediment filter Inline The sediment filter Inline is provided with an antibacterial protection. Due to the special winding, the protection is distributed over a very large area. Upon contact of germs with the protective surface of their propagation process is interrupted. Textile coarse and prefilter e.g. for removal of heavily particulate polluted or polluted (turbidity) input water. Water that contains a high proportion of sediments affects the visual value of beverages and can in the worst case have a damaging effect on your system components. Use: The filter cartridge must be changed after six months. In principle, up to 10.000 liters of water may be filtered during this time. An earlier change may, however, be necessary if the water flow is noticeably reduced. The water flow is now up to 20 liters / min depending on water pressure and filter housing. Protect from frost.

The set contains one main and two extension filter stages (three-stage undersink system) of the Aqua Avanti Inline series with quick-change housings. The main filter stage is the basic system, the extension filter stages are switched on. The filter stages are connected in the selectable order (please do not interchange) before the drinking water tapping; all standard necessary connections, hoses and fittings are included. Manufacturers are the companies Prime Inventions and Carbonit of an exclusive cooperation. Production takes place in Germany. Advantages of the Aqua Avanti Inline system compared to conventional filter housings Forget about dismantling and unscrewing filter housings to change filters. With the AA Inline filter system you can change filter cartridges in seconds. Simply remove the filter cartridge by turning it counterclockwise and insert a new filter cartridge the other way around. Done. You no longer need a housing key. Since you do not come into contact with the inside of the filter cartridge, the exchange is very hygienic. Connections (standard connection set is included) The included faucet adapter has a 3/8" standard thread and thus fits to most of our offered faucets. An adaptation to other threads e.g. UNS 7/16-24 is of course optionally possible. For easy connection to the corner tap under the sink, a high-quality European connection adapter JG ASV-7 is supplied with each main filter stage, so that they do not need an additional corner valve with existing 3 / inch cold water connection. Also a leakage protection is supplied, which provides you with additional safety. Additional accessories As an alternative to the enclosed connection set, you can find suitable adapters for easier, space-saving installation in the Accessories & Spare Parts category. Optionally available are: - Plug-in connector - Adapter DM 3/8 inch to 3/8 inch 90 degree - 3/8 inch connection hose, AA inline filter Information about the selectable filter cartridges EM Premium 5 Inline filter This filter cartridge was manufactured by CARBONIT® based on the NFP Premium exclusively for Prime Inventions. Due to the mechanical filter fineness of < 0.45 ?m, it has a high chemical-physical adsorption performance against chemical substances. Bacteria, micro- or nanoplastics, heavy metals, pesticides and hormones can be filtered. The filter cartridges produced by CARBONIT® combine water filtration and a taste improvement of the water. For the production, a special EM ceramic is added to the activated carbon filter during the process of sintering. This ceramic causes, among other things, a reduction of the surface tension of the water and the reduction of the cluster structures. As a result, the taste of the water is described by most people as softer or rounder. The filter cartridges are ideal for retaining potential pollutants in drinking water systems.  Pollutants of anthropogenic origin, which could accumulate in the organism, are reliably removed and stored. The activated carbon filter block has a commercially available thin wall for liquid treatment at low line pressure. Usage: The filter cartridge must be replaced after six months (DIN 1988). In principle, up to 10,000 liters of water may be filtered within this time. However, an earlier change may be necessary if the water flow is noticeably reduced. This is usually an indication of increased occurrence of fine particles in the unfiltered water. The new water flow rate is approx. 2 liters/min. Use only with cold water, protect from frost. Weight: 830gr EM IFP Premium 5 Inline This filter cartridge was manufactured by CARBONIT® based on NFP Premium exclusively for the company Prime Inventions. Due to the mechanical filter fineness of <0.45 µm, it has a high chemical-physical adsorption performance against chemical substances. The addition of EM ceramic gives it special properties. Among other things, this ceramic reduces the surface tension of the water and reduces the size of the cluster structures. Thus, the taste of the water is described by most people as softer or rounder. The filter cartridges type IFP Premium are ideal for the retention of possible pollutants in drinking water systems. Pollutants of anthropogenic origin, which could accumulate in the organism, are reliably removed and stored. The IFP activated carbon filter block has a commercially available, thin wall for liquid treatment at low line pressure. Use: The filter cartridge must be changed after six months. In principle, up to 5.000 liters of water may be filtered during this time. An earlier change may, however, be necessary if the water flow is noticeably reduced. This is usually an indication of increased occurrence of fine particles in unfiltered water. The water flow is now about 4 liters / min. Use only with cold water, protect against frost. Weight: 770 gr. Decalcification Inline The flowed through ion exchange resin reduces the hardness of the water. The decalcifying cartridge improves the taste of cold and hot drinks (especially to improve the aroma of coffee and tea) and protects household appliances against calcification. Use: The water flow should not exceed about 2 l / min. so that a noticeable descaling is guaranteed. The possible duration of use depends on the degree of hardness of the input water. Depending on the raw water hardness up to 1,900 l (hardness 5-10 dh) or 450 l (degree of hardness 11-25 dh) can be achieved as static quantity. The cartridge must be changed, if the typical chalk appearances like a film is built on the surface of the tea beverage, loss of tea aroma / coffee or calcification deposits on surfaces. According to DIN 1988, a change is required after 6 months at the latest. Anti-limescale Inline Use for chemical-free limescale protection in the Aqua-Avanti (Aqua Kalko) Inline Filter System. The flowed through catalyst granule works on the seed crystal principle. This precipitate lime is bound to the seed crystals and floats in the water with away. The procedure serves to protect the line and devices. Limescale deposits are easier to remove after use but removal of the lime does not take place. Use: The water flow should not exceed approx. 3 l / min. When used with water in drinking water quality, the catalyst granules sustains about 3 years. Sediment filter Inline The sediment filter Inline is provided with an antibacterial protection. Due to the special winding, the protection is distributed over a very large area. Upon contact of germs with the protective surface of their propagation process is interrupted. Textile coarse and prefilter e.g. for removal of heavily particulate polluted or polluted (turbidity) input water. Water that contains a high proportion of sediments affects the visual value of beverages and can in the worst case have a damaging effect on your system components. Use: The filter cartridge must be changed after six months. In principle, up to 10.000 liters of water may be filtered during this time. An earlier change may, however, be necessary if the water flow is noticeably reduced. The water flow is now up to 20 liters / min depending on water pressure and filter housing. Protect from frost.

Water filter under-sink solution for the removal of lime (decalcification by ion exchange) of the AquaAvanti Inline series with the innovative quick-change housings. This main filter stage is the basic system that can be used as the sole filter system. In addition, it is the basis for one or two expansion stages. Description of the filter descaling AquaAvanti Inline The ion exchange resin flowed through reduces the hardness of the water. The descaling cartridge improves the taste of cold and hot drinks (especially to improve the aroma of coffee and tea) and protects household appliances from calcification.  Usage: The water flow should not exceed approx. 2 l/min. to ensure noticeable descaling. The possible service life depends on the hardness of the input water. Depending on the raw water hardness, up to 1,900 l (degree of hardness 5-10 dh) or 450 l (degree of hardness 11-25 dh) can be achieved as a standing volume. The cartridge must be replaced when the limescale-typical phenomena such as tea skin, loss of aroma with tea/coffee or limescale deposits on surfaces reappear. According to DIN 1988, a change is required after 6 months at the latest. Advantages of the Aqua Avanti Inline system compared to conventional filter housings Forget about dismantling and unscrewing filter housings to change filters. With the AA Inline filter system, you can change filter cartridges in seconds. Simply remove the filter cartridge by turning it counterclockwise and insert a new filter cartridge the other way around. Done. You no longer need a housing key. Since you do not come into contact with the inside of the filter cartridge, the exchange is very hygienic. Connections (standard connection set is included) The included faucet adapter has a 3/8" standard thread and thus fits to the faucets offered by us mesiten of. An adaptation to other threads e.g. UNS 7/16-24 is of course optionally possible. For easy connection to the corner tap under the sink, a high-quality European connection adapter JG ASV-7 is supplied with each main filter stage, so that they do not need an additional corner valve with existing 3 / inch cold water connection. Also a leakage protection is supplied, which provides you with additional safety. Additional accessories As an alternative to the enclosed connection set, you can find suitable adapters in the Accessories & Spare Parts category for easier, space-saving installation. Optionally available are: -Connector -Adapter DM 3/8 inch to 3/8 inch 90 degree -3/8 inch connection hose, AA inline filter -flow regulator 1.9l min 3/8 inch inline Note: Flow rate should be limited to approximately 2l/min for good softening performance. Use only with cold water. Protect from frost.

Sport trink with flip-flop lid and small mouth, which is screwed instead of the blue lid on the Tritan bottles. The sports drink cap fits the 500 and 1000 ml bottles.

Water filtration and water taste improvement combined as the main filter stage of the Aqua Avanti Inline series with quick-change housings and original CARBONIT filter. This main filter stage is the basic system that can be used as the sole filter system. In addition, it is the basis for one or two extension stages. Advantages of the Aqua Avanti Inline system compared to conventional filter housings Forget about dismantling and unscrewing filter housings to change filters. With the AA Inline filter system, you can change filter cartridges in seconds. Simply remove the filter cartridge by turning it counterclockwise and insert a new filter cartridge the other way around. Done. You no longer need a housing key. Since you do not come into contact with the inside of the filter cartridge, the replacement is very hygienic. Description of the EM Premium 5 Inline filter This filter cartridge was manufactured by CARBONIT® based on the NFP Premium exclusively for Prime Inventions. Due to the mechanical filter fineness of < 0.45 ?m, it has a high chemical-physical adsorption capacity against chemical substances. Bacteria, micro- or nanoplastics, heavy metals, pesticides and hormones can be filtered. The filter cartridges produced by CARBONIT® combine water filtration and a taste improvement of the water. For the production, a special EM ceramic is added to the activated carbon filter during the process of sintering. This ceramic causes, among other things, a reduction of the surface tension of the water and the reduction of the cluster structures. As a result, the taste of the water is described by most people as softer or rounder. The filter cartridges are ideal for retaining potential pollutants in drinking water systems.  Pollutants of anthropogenic origin, which could accumulate in the organism, are reliably removed and stored. The activated carbon filter block has a standard thin wall for liquid treatment at low line pressure. Connections (standard connection set is included) The included faucet adapter has a 3/8" standard thread and thus fits most of the offered faucets. An adaptation to other threads e.g. UNS 7/16-24 is of course optionally possible. For easy connection to the corner tap under the sink, a high-quality European connection adapter JG ASV-7 is supplied with each main filter stage, so that you do not need an additional corner valve if you have a 3/8" cold water connection. Likewise, a leakage protection is supplied, which provides you with additional safety. Additional accessories As an alternative to the included connection set, you can find suitable adapters in the Accessories & Spare Parts category for easier, space-saving installation. Optionally available are: -Connector -Adapter DM 3/8 inch to 3/8 inch 90 degree -3/8 inch connection hose, AA inline filter Usage: The filter cartridge must be replaced after six months. Generally, up to 10,000 gallons of water may be filtered within this time. However, an earlier change may be necessary if the water flow is noticeably reduced. This is usually an indication of increased occurrence of fine particles in the unfiltered water. The water flow rate is now approx. 2-3 liters/min. Use only with cold water, protect from frost.

The famous water filter system- inexpensive, quickly installed, handy, flexible and 100 % CARBONIT® quality. Point-of-Use (POU) System as a countertop connected to tap faucet. Placed on a counter and connected by tubing to an existing kitchen sink tap. Clean water from the waterworks travels a long way until it reaches your household. Thus its quality diminishes through interaction with the external service system and especially yours internal house installation. The water often is contaminated with unwanted substances that are not restricted by law at this point. These substances include possibly medical residues, polar pesticides and fibres of asbestos. To make sure you should consuming only the purest water we have developed our CARBONIT® Premium Drinking Water Filters. They  reduce the amount of unwanted substances and improve the taste and smell of your tap water. The filter system does not remove beneficial minerals. If the small lever (diverter) is shifted to the side, the tap water is routed through the "Sanuno" filter system. This water is recommended as drinking water or for tea, or all other ways of human consumptions. Don´t forget your pets :-). Usable even with high concentration levels of lead and copper. Using the direct passage (by not shifting the lever) normal unfiltered water is provided for washing the dishes, for example. Do not use behind a depressurized storage water heater. Do not attach to a spray hose tap with shower hose. Operate only with cold water! The housing is made out of Polypropylen. In line with current good practice and epdwa Guidelines. The filter cartridges should be changed every 6 months. Scope of Supply Complete filter device with connection hose and special deflector valve with adapter for internal thread. A CARBONIT® Monoblock NFP Premium filter cartridge (SANUNO Classic) is included. Use instructions Connection to standard kitchen tap with external thread (M22x1) with the included special diverter valve (an adapter for valves with internal thread M24x1 is also included) Non-behind-pressurized boilers operate! Do not connect to a shower tap! Operate only with cold water ! Protect from frost.

Countertop filter AquaAvanti Single with stainless steel spout and filter cartridge EM Premium 5 from Carbonit and Prime Inventions. The water is supplied by means of a supply hose, which is connected to the outlet of a standard water tap with M24x1 thread through a metal changeover valve. The delivery is basically only together with an original Carbonit® filter cartridge. As standard, an EM Premium 5 filter cartridge is included, which further improves the taste of the water compared to the NFP Premium. The included gasket will fit all CARBONIT® and Prime Inventions filter cartridges, such as 9¾-inch NFP, IFP and EM series cartridges. As an alternative and nice connectivity, the new direct connection adapter is ideal. The water is supplied by means of a supply hose, which is connected to the outlet of a standard water tap with M24x1 thread through a metal changeover valve. With the adapter you can connect a table filter with the help of a 3/8 inch armored hose under the sink, directly to the cold water connection valve. A hole through the worktop is necessary, just like a tap. With the direct connection adapter you can connect the following table filters:     Sanuno Basic, Classic and Premium     AquaAvanti Mercuro     AquaAvanti Single     AquaAvanti Double     AquaAvanti OnTop and other water filtration systems that have a 3/8 "inlet hose. Important note: Please do not operate on pressureless boilers!