Connection set for SYR dosing pump NeoDos 3100 Connect (with softening system)

The new NeoSoft Connect 5000 soft water system from SYR operates as a dual system. This ensures that soft water is reliably available even during the regeneration phase.   The system is optimally suited for single-family houses and multi-family houses up to approx. 12 persons. Automatic adjustment of the operating mode The innovative and intelligent automatic adjustment of the operating mode is a real highlight. The integrated turbine of the NeoSoft water softener continuously measures the water consumption, so that the intelligent system can always optimally adapt the operating mode to the water consumption. Whether ECO, STANDARD or POWER - the currently active mode is displayed in green on the 7 " touchscreen.  Salt tank with large soft-close lid and salt sensor Filling the salt tank is extremely convenient. When the soft-close lid of the system is opened, the tank light is switched on. A motion sensor is also integrated into the lid. When the lid is closed, the sensor automatically measures the salt level via ultrasound without contact. This means that you are always precisely informed when it needs to be refilled. There is no need to enter the salt quantity manually! Modern communication If the NeoSoft Connect is connected to the Internet via WLAN or LAN, it can be controlled via SYR App. In addition, the registered user receives push notifica when, for example, salt needs to be refilled. If the raw water hardness changes, NeoSoft Connect issues a warning. Statistics such as water consumption, a logbook, maintenance settings and execution - the NeoSoft Connect can be operated via touchscreen and in online mode with the SYR app via tablet and smartphone and guides you through each process with clear displays. For convenient maintenance or longer periods of absence (e.g. vacation), the softening system can be bypassed without interruption if required. Easy installation The NeoSoft Connect offers everything for a time-saving and safe connection, as rinse and overflow hoses are already firmly connected to the system. The sandwich connection flange is placed on the SYR universal flange. The flexible hose connections are mounted by means of a torsion-proof plug-in system. Then connect the rinsing and overflow hoses to the drain funnel included in the scope of delivery and fill in the regeneration salt. The installation checklist shows whether the installation has been completed in full. Saving money and resources With the system, there is a savings potential of several hundred euros per year for a single-family household. You will save cleaning agents, detergents, shower gel, hair shampoo, descaler for household appliances and additional maintenance costs for electrical appliances and installations in your household. Lime deposits in pipes or household appliances, as stubborn limestone. Over time, this can lead to constricted water pipes, burnt-out heating coils of washing machines and dishwashers, defective instantaneous water heaters or leaking boilers. In addition, hours of cleaning calcified shower walls, shower stalls, bathtubs, toilets and sinks are eliminated. Water quality Your water feels noticeably softer. Coffee, tea and food simply taste better due to the softening of the water ! The advantages of the SYR Neosoft Connect 5000 approved for rental and commercial use very low environmentally friendly salt consumption per regeneration Installation with torsion-free flexible armored hoses in plug-in system consumption-dependent, water-saving regeneration 2 softener columns for continuous soft water supply automatic disinfection little space required due to compact design easy operation due to color touch display control and operation via SYR Connect APP illuminated salt tank for easy, quick visual control high throughput capacity protects against limescale in pipes and appliances saves energy automatic control Made in Germany Components and design The functional parts of the system are made of the highest quality plastic. The housing parts are made of impact-resistant thermoplastic, the rubber parts of ageing-resistant, hard-wearing elastomers. Low-lead, dezincification-resistant brass alloy and stainless steel are used for all other functional parts. The materials used comply with the recognized rules of technology. The plastic parts and elastomers in contact with water comply with the KTW guideline of the German Federal Environment Agency. Installation with prefilter If you already have a drinking water filter from the DRUFI system at the house connection, the connection is extremely simple. In this case, no installation work has to be carried out on the water-bearing system! The decalcification system is then simply screwed into the sandwich ( see picture 4 ) - DONE! A compact filter and softening unit is created from two fittings. And this is how easy it is Loosen the DRUFI, flange the connection fitting with integrated blending device, mount the DRUFI again and connect the two hoses of the SYR Neosoft Connect 5000, an additional flange is not required. Installation location The water softener is installed centrally behind the water meter system. To avoid malfunctions, the softening plant is effectively protected by connecting a drinking water filter (Drufi system) upstream. A pressure reducer must be connected upstream from a pressure of 5 bar. The water to be softened must be clear, free of solid impurities and free of iron and manganese (values within the scope of the TWVO). Maintenance As the softening plant works automatically, salt only has to be refilled regularly. According to DIN EN 806, Part 5, maintenance must be carried out at least once a year, or every six months in the case of communal systems. A maintenance contract through the specialized trade permanently ensures the safe operating function. We will be happy to explain more in a consultation. Some tips from our side: Please clean the salt container from incrustations at regular intervals and use only high-quality salt. According to the Drinking Water Ordinance, regenerating salt in Germany, must meet the purity requirements of: DIN EN 973 Table 1/Type A/Table 3. These are the most common causes of faults in water softening systems and are easy to avoid. This will prevent unnecessary, not inconsiderable costs that can be incurred by an installer or the factory customer service!

With the SYR dosing pump NeoDos 3100 Connect, mineral solutions are added to the drinking water. The mineral solutions prevent corrosion and limescale formation, raise the ph-value of the water or are used e.g. after a softening system or to stabilize the hardness of the water in copper or galvanized pipelines as well as in mixed installations. The dosing system meets the requirements of DIN 19635. The NeoDos Connect dosing pump detects the flowing water volume by means of a water meter and thus determines the addition of minerals from the dosing tanks, which are pumped into the pipe via the dosing hose. Optional dosing solutions (not included) With the mineral solutions DL 1 and DL 2 different solutions from SYR are available. The mineral dosing solutions DL 1 and DL 2 are approved drinking water additives and comply with the requirements of the Foodstuffs Act, the Additives Ordinance and the Drinking Water Ordinance. They contain phosphates and silicate combinations designed to protect drinking water systems. The special phosphates prevent corrosion and rust water formation and stabilize water hardness. Phosphate is an essential mineral for the human body and occurs naturally in many foods. The phosphate used in the solutions meets the strict requirements of DIN/EN and is highly pure. The daily requirement of an adult is 700 mg of phosphate. On average, people consume 1,092 g of phosphate per day with dairy products and approx. 1,068 g with meat and sausage. By comparison, if phosphate is added to drinking water by means of a dosing solution, only 4 mg is consumed daily. Which dosing solution is the right one for me? DL1 (hardness stabilization + corrosion protection) is used for hardness levels > 14 °dH without a water softener. DL2 (corrosion protection) is used for hardness levels < 14 °dH with a softening system. Important information for ordering For use without a water softener (stand alone), the "Inoculation piece incl. connection set" must be ordered separately in the correct nominal size DN 20-DN 32: DN 20: 3100.20.000 DN 25: 3100.25.000 DN 32: 3100.32.000 Alternatively, when operating with a water softener (LEX Plus 10 Connect series and Neosoft), the Lex Plus / Neosoft connection set (3100.00.011) must be ordered. More information can be found in the operating instructions, which can be found at the article under Downloads.

Mit den Minerallösungen DL 1 und DL 2 stehen zwei unterschiedliche Lösungen aus dem Hause SYR zur Verfügung. Die Minerallösungen verhindern eine Korrosions- und Kalksteinbildung, heben den ph-Wert des Wassers an oder werden z.B. nach einer Enthärtungsanlage oder zur Härtestabilisierung des Wassers bei Kupfer- bzw. verzinkten Rohrleitungen sowie auch Mischinstallationen eingesetzt. Die Dosieranlage erfüllt die Anforderungen nach DIN 19635. Hier bieten wir Ihnen die Variante DL 1 an. Die mineralischen Dosierlösungen DL 1 und DL 2 sind zugelassene Trinkwasser-Zusatzstoffe und entsprechen den Anforderungen des Lebensmittelgesetzes, der Zusatzstoffverordnung und der Trinkwasser-Verordnung. Diese enthalten Phosphate und Silikat-Kombinationen, die zum Schutz von Trinkwasser-Systemen konzipiert sind. Die speziellen Phosphate verhindern Korrosion und Rostwasserbildung und stabilisieren die Wasserhärte. Phosphat ist ein essentieller Mineralstoff für den menschlichen Körper und kommt natürlich in vielen Lebensmitteln vor. Das in den Lösungen eingesetzte Phosphat entspricht den strengen Vorgaben der DIN/EN und ist hochrein. Der Tagesbedarf eines Erwachsenen liegt bei 700 mg Phosphat. Durchschnittlich nimmt man mit Milchprodukten 1.092 g und mit Fleisch und Wurst ca. 1.068 g Phosphat pro Tag zu sich. Zum Vergleich: Wird dem Trinkwasser mittels einer Dosierung Phosphat zugesetzt, werden nur 4 mg täglich aufgenommen. Welche Dosiermittelösung ist die richtige für mich? DL1 (Härtestabilisierung + Korrosionsschutz ) wird bei Härtegraden > 14 °dH ohne Enthärtungsanlage eingesetzt  DL2 (Korrosionsschutz) wird bei Härtegraden < 14 °dH mit Enthärtungsanlage eingesetzt

Mit den Minerallösungen DL 1 und DL 2 stehen zwei unterschiedliche Lösungen aus dem Hause SYR zur Verfügung. Die Minerallösungen verhindern eine Korrosions- und Kalksteinbildung, heben den ph-Wert des Wassers an oder werden z.B. nach einer Enthärtungsanlage oder zur Härtestabilisierung des Wassers bei Kupfer- bzw. verzinkten Rohrleitungen sowie auch Mischinstallationen eingesetzt. Die Dosieranlage erfüllt die Anforderungen nach DIN 19635. Hier bieten wir Ihnen die Variante DL 1 an. Die mineralischen Dosierlösungen DL 1 und DL 2 sind zugelassene Trinkwasser-Zusatzstoffe und entsprechen den Anforderungen des Lebensmittelgesetzes, der Zusatzstoffverordnung und der Trinkwasser-Verordnung. Diese enthalten Phosphate und Silikat-Kombinationen, die zum Schutz von Trinkwasser-Systemen konzipiert sind. Die speziellen Phosphate verhindern Korrosion und Rostwasserbildung und stabilisieren die Wasserhärte. Phosphat ist ein essentieller Mineralstoff für den menschlichen Körper und kommt natürlich in vielen Lebensmitteln vor. Das in den Lösungen eingesetzte Phosphat entspricht den strengen Vorgaben der DIN/EN und ist hochrein. Der Tagesbedarf eines Erwachsenen liegt bei 700 mg Phosphat. Durchschnittlich nimmt man mit Milchprodukten 1.092 g und mit Fleisch und Wurst ca. 1.068 g Phosphat pro Tag zu sich. Zum Vergleich: Wird dem Trinkwasser mittels einer Dosierung Phosphat zugesetzt, werden nur 4 mg täglich aufgenommen. Welche Dosiermittelösung ist die richtige für mich? DL1 (Härtestabilisierung + Korrosionsschutz ) wird bei Härtegraden > 14 °dH ohne Enthärtungsanlage eingesetzt  DL2 (Korrosionsschutz) wird bei Härtegraden < 14 °dH mit Enthärtungsanlage eingesetzt

Mit den Minerallösungen DL 1 und DL 2 stehen zwei unterschiedliche Lösungen aus dem Hause SYR zur Verfügung. Die Minerallösungen verhindern eine Korrosions- und Kalksteinbildung, heben den ph-Wert des Wassers an oder werden z.B. nach einer Enthärtungsanlage oder zur Härtestabilisierung des Wassers bei Kupfer- bzw. verzinkten Rohrleitungen sowie auch Mischinstallationen eingesetzt. Die Dosieranlage erfüllt die Anforderungen nach DIN 19635. Hier bieten wir Ihnen die Variante DL 1 an. Die mineralischen Dosierlösungen DL 1 und DL 2 sind zugelassene Trinkwasser-Zusatzstoffe und entsprechen den Anforderungen des Lebensmittelgesetzes, der Zusatzstoffverordnung und der Trinkwasser-Verordnung. Diese enthalten Phosphate und Silikat-Kombinationen, die zum Schutz von Trinkwasser-Systemen konzipiert sind. Die speziellen Phosphate verhindern Korrosion und Rostwasserbildung und stabilisieren die Wasserhärte. Phosphat ist ein essentieller Mineralstoff für den menschlichen Körper und kommt natürlich in vielen Lebensmitteln vor. Das in den Lösungen eingesetzte Phosphat entspricht den strengen Vorgaben der DIN/EN und ist hochrein. Der Tagesbedarf eines Erwachsenen liegt bei 700 mg Phosphat. Durchschnittlich nimmt man mit Milchprodukten 1.092 g und mit Fleisch und Wurst ca. 1.068 g Phosphat pro Tag zu sich. Zum Vergleich: Wird dem Trinkwasser mittels einer Dosierung Phosphat zugesetzt, werden nur 4 mg täglich aufgenommen. Welche Dosiermittelösung ist die richtige für mich? DL1 (Härtestabilisierung + Korrosionsschutz ) wird bei Härtegraden > 14 °dH ohne Enthärtungsanlage eingesetzt  DL2 (Korrosionsschutz) wird bei Härtegraden < 14 °dH mit Enthärtungsanlage eingesetzt

With the mineral solutions DL 1 and DL 2, two different solutions from SYR are available. The mineral solutions prevent corrosion and limescale formation, raise the pH value of the water or are used, for example, after a softening system or to stabilize the hardness of the water in copper or galvanized pipelines as well as in mixed installations. The dosing unit meets the requirements of DIN 19635. Here we offer the DL 2 variant. The mineral dosing solutions DL 1 and DL 2 are approved drinking water additives and meet the requirements of the Foodstuffs Act, the Additives Ordinance and the Drinking Water Ordinance. They contain phosphates and silicate combinations designed to protect drinking water systems. The special phosphates prevent corrosion and rust water formation and stabilize water hardness. Phosphate is an essential mineral for the human body and occurs naturally in many foods. The phosphate used in the solutions meets the strict requirements of DIN/EN and is highly pure. The daily requirement of an adult is 700 mg of phosphate. On average, we consume 1,092 g of phosphate per day with dairy products and approx. 1,068 g with meat and sausage. By comparison, if phosphate is added to drinking water by means of a dosing solution, only 4 mg is consumed daily. Which dosing solution is the right one for me? DL1 (hardness stabilization + corrosion protection ) is used for hardness levels > 14 °dH without a water softening system. DL2 (corrosion protection) is used for hardness levels < 14 °dH with a water softener.

With the mineral solutions DL 1 and DL 2, two different solutions from SYR are available. The mineral solutions prevent corrosion and limescale formation, raise the pH value of the water or are used, for example, after a softening system or to stabilize the hardness of the water in copper or galvanized pipelines as well as in mixed installations. The dosing unit meets the requirements of DIN 19635. Here we offer the DL 2 variant. The mineral dosing solutions DL 1 and DL 2 are approved drinking water additives and meet the requirements of the Foodstuffs Act, the Additives Ordinance and the Drinking Water Ordinance. They contain phosphates and silicate combinations designed to protect drinking water systems. The special phosphates prevent corrosion and rust water formation and stabilize water hardness. Phosphate is an essential mineral for the human body and occurs naturally in many foods. The phosphate used in the solutions meets the strict requirements of DIN/EN and is highly pure. The daily requirement of an adult is 700 mg of phosphate. On average, we consume 1,092 g of phosphate per day with dairy products and approx. 1,068 g with meat and sausage. By comparison, if phosphate is added to drinking water by means of a dosing solution, only 4 mg is consumed daily. Which dosing solution is the right one for me? DL1 (hardness stabilization + corrosion protection ) is used for hardness levels > 14 °dH without a water softening system. DL2 (corrosion protection) is used for hardness levels < 14 °dH with a water softener.

With the mineral solutions DL 1 and DL 2, two different solutions from SYR are available. The mineral solutions prevent corrosion and limescale formation, raise the pH value of the water or are used, for example, after a softening system or to stabilize the hardness of the water in copper or galvanized pipelines as well as in mixed installations. The dosing unit meets the requirements of DIN 19635. Here we offer the DL 2 variant. The mineral dosing solutions DL 1 and DL 2 are approved drinking water additives and meet the requirements of the Foodstuffs Act, the Additives Ordinance and the Drinking Water Ordinance. They contain phosphates and silicate combinations designed to protect drinking water systems. The special phosphates prevent corrosion and rust water formation and stabilize water hardness. Phosphate is an essential mineral for the human body and occurs naturally in many foods. The phosphate used in the solutions meets the strict requirements of DIN/EN and is highly pure. The daily requirement of an adult is 700 mg of phosphate. On average, we consume 1,092 g of phosphate per day with dairy products and approx. 1,068 g with meat and sausage. By comparison, if phosphate is added to drinking water by means of a dosing solution, only 4 mg is consumed daily. Which dosing solution is the right one for me? DL1 (hardness stabilization + corrosion protection ) is used for hardness levels > 14 °dH without a water softening system. DL2 (corrosion protection) is used for hardness levels < 14 °dH with a water softener.