- Order number: 1337-001
- EAN 4250188801913
The set contains one main and two extension filter stages (three-stage undersink system) of the Aqua Avanti Inline series with quick-change housings. The main filter stage is the basic system, the extension filter stages are switched on. The filter stages are connected in the selectable order (please do not interchange) before the drinking water tapping; all standard necessary connections, hoses and fittings are included. Manufacturers are the companies Prime Inventions and Carbonit of an exclusive cooperation. Production takes place in Germany.
Advantages of the Aqua Avanti Inline system compared to conventional filter housings
Forget about dismantling and unscrewing filter housings to change filters. With the AA Inline filter system you can change filter cartridges in seconds. Simply remove the filter cartridge by turning it counterclockwise and insert a new filter cartridge the other way around. Done. You no longer need a housing key. Since you do not come into contact with the inside of the filter cartridge, the exchange is very hygienic.
Connections (standard connection set is included)
The included faucet adapter has a 3/8" standard thread and thus fits to most of our offered faucets. An adaptation to other threads e.g. UNS 7/16-24 is of course optionally possible. For easy connection to the corner tap under the sink, a high-quality European connection adapter JG ASV-7 is supplied with each main filter stage, so that they do not need an additional corner valve with existing 3 / inch cold water connection. Also a leakage protection is supplied, which provides you with additional safety.
Additional accessories
As an alternative to the enclosed connection set, you can find suitable adapters for easier, space-saving installation in the Accessories & Spare Parts category.
Optionally available are:
- Plug-in connector
- Adapter DM 3/8 inch to 3/8 inch 90 degree
- 3/8 inch connection hose, AA inline filter
Information about the selectable filter cartridges
EM Premium 5 Inline filter
This filter cartridge was manufactured by CARBONIT® based on the NFP Premium exclusively for Prime Inventions. Due to the mechanical filter fineness of < 0.45 ?m, it has a high chemical-physical adsorption performance against chemical substances. Bacteria, micro- or nanoplastics, heavy metals, pesticides and hormones can be filtered. The filter cartridges produced by CARBONIT® combine water filtration and a taste improvement of the water. For the production, a special EM ceramic is added to the activated carbon filter during the process of sintering. This ceramic causes, among other things, a reduction of the surface tension of the water and the reduction of the cluster structures. As a result, the taste of the water is described by most people as softer or rounder.
The filter cartridges are ideal for retaining potential pollutants in drinking water systems. Pollutants of anthropogenic origin, which could accumulate in the organism, are reliably removed and stored. The activated carbon filter block has a commercially available thin wall for liquid treatment at low line pressure.
Usage: The filter cartridge must be replaced after six months (DIN 1988). In principle, up to 10,000 liters of water may be filtered within this time. However, an earlier change may be necessary if the water flow is noticeably reduced. This is usually an indication of increased occurrence of fine particles in the unfiltered water. The new water flow rate is approx. 2 liters/min. Use only with cold water, protect from frost.
Weight: 830gr
EM IFP Premium 5 Inline
This filter cartridge was manufactured by CARBONIT® based on NFP Premium exclusively for the company Prime Inventions. Due to the mechanical filter fineness of <0.45 µm, it has a high chemical-physical adsorption performance against chemical substances. The addition of EM ceramic gives it special properties. Among other things, this ceramic reduces the surface tension of the water and reduces the size of the cluster structures. Thus, the taste of the water is described by most people as softer or rounder.
The filter cartridges type IFP Premium are ideal for the retention of possible pollutants in drinking water systems.
Pollutants of anthropogenic origin, which could accumulate in the organism, are reliably removed and stored. The IFP activated carbon filter block has a commercially available, thin wall for liquid treatment at low line pressure.
Use: The filter cartridge must be changed after six months. In principle, up to 5.000 liters of water may be filtered during this time. An earlier change may, however, be necessary if the water flow is noticeably reduced. This is usually an indication of increased occurrence of fine particles in unfiltered water. The water flow is now about 4 liters / min. Use only with cold water, protect against frost.
Weight: 770 gr.
Decalcification Inline
The flowed through ion exchange resin reduces the hardness of the water. The decalcifying cartridge improves the taste of cold and hot drinks (especially to improve the aroma of coffee and tea) and protects household appliances against calcification.
Use: The water flow should not exceed about 2 l / min. so that a noticeable descaling is guaranteed. The possible duration of use depends on the degree of hardness of the input water. Depending on the raw water hardness up to 1,900 l (hardness 5-10 dh) or 450 l (degree of hardness 11-25 dh) can be achieved as static quantity. The cartridge must be changed, if the typical chalk appearances like a film is built on the surface of the tea beverage, loss of tea aroma / coffee or calcification deposits on surfaces.
According to DIN 1988, a change is required after 6 months at the latest.
Anti-limescale Inline
Use for chemical-free limescale protection in the Aqua-Avanti (Aqua Kalko) Inline Filter System. The flowed through catalyst granule works on the seed crystal principle. This precipitate lime is bound to the seed crystals and floats in the water with away. The procedure serves to protect the line and devices. Limescale deposits are easier to remove after use but removal of the lime does not take place.
Use: The water flow should not exceed approx. 3 l / min. When used with water in drinking water quality, the catalyst granules sustains about 3 years.
Sediment filter Inline
The sediment filter Inline is provided with an antibacterial protection. Due to the special winding, the protection is distributed over a very large area. Upon contact of germs with the protective surface of their propagation process is interrupted. Textile coarse and prefilter e.g. for removal of heavily particulate polluted or polluted (turbidity) input water. Water that contains a high proportion of sediments affects the visual value of beverages and can in the worst case have a damaging effect on your system components.
Use: The filter cartridge must be changed after six months. In principle, up to 10.000 liters of water may be filtered during this time. An earlier change may, however, be necessary if the water flow is noticeably reduced. The water flow is now up to 20 liters / min depending on water pressure and filter housing.
Protect from frost.
