Prices incl. VAT plus shipping costs
Ready to ship today,
Delivery time appr. 1-3 workdays
AquaAvanti Inline series with quick-change housings as an under-sink system for decalcification of your drinking water. Manufacturer of this water filter system is the company Prime Inventions. It is produced in Germany. Connection material and a leakage protection is already included in the set.
- Order number: 1335
- EAN 4250188802729
Water filter under-sink solution for the removal of lime (decalcification by ion exchange) of the AquaAvanti Inline series with the innovative quick-change housings. This main filter stage is the basic system that can be used as the sole filter system. In addition, it is the basis for one or two expansion stages.
Description of the filter descaling AquaAvanti Inline
The ion exchange resin flowed through reduces the hardness of the water. The descaling cartridge improves the taste of cold and hot drinks (especially to improve the aroma of coffee and tea) and protects household appliances from calcification.
Usage: The water flow should not exceed approx. 2 l/min. to ensure noticeable descaling. The possible service life depends on the hardness of the input water. Depending on the raw water hardness, up to 1,900 l (degree of hardness 5-10 dh) or 450 l (degree of hardness 11-25 dh) can be achieved as a standing volume. The cartridge must be replaced when the limescale-typical phenomena such as tea skin, loss of aroma with tea/coffee or limescale deposits on surfaces reappear. According to DIN 1988, a change is required after 6 months at the latest.
Advantages of the Aqua Avanti Inline system compared to conventional filter housings
Forget about dismantling and unscrewing filter housings to change filters. With the AA Inline filter system, you can change filter cartridges in seconds. Simply remove the filter cartridge by turning it counterclockwise and insert a new filter cartridge the other way around. Done. You no longer need a housing key. Since you do not come into contact with the inside of the filter cartridge, the exchange is very hygienic.
Connections (standard connection set is included)
The included faucet adapter has a 3/8" standard thread and thus fits to the faucets offered by us mesiten of. An adaptation to other threads e.g. UNS 7/16-24 is of course optionally possible. For easy connection to the corner tap under the sink, a high-quality European connection adapter JG ASV-7 is supplied with each main filter stage, so that they do not need an additional corner valve with existing 3 / inch cold water connection. Also a leakage protection is supplied, which provides you with additional safety.
As an alternative to the enclosed connection set, you can find suitable adapters in the Accessories & Spare Parts category for easier, space-saving installation.
Optionally available are:
-Adapter DM 3/8 inch to 3/8 inch 90 degree
-3/8 inch connection hose, AA inline filter
-flow regulator 1.9l min 3/8 inch inline
Note: Flow rate should be limited to approximately 2l/min for good softening performance. Use only with cold water. Protect from frost.
Height with filter head: approx. 33 cm
Width filter head: approx. 10 cm (with 90 ° connections approx. 16 cm)
Width filter: approx. 9 cm
Length of tubes: 80cm