UV system PURE 1.0 16 S watts for disinfecting water

€495.00*

Content: 1 Stück

Available, delivery time: 5 Tage

Stück
Product number: 1893
Manufacturer: WatPass
EAN: 4260728216855
The UV water treatment unit Pure 1.0, from the manufacturer UST, is used to inactivate germs such as bacteria and viruses. It can treat up to 330 liters of water per hour. Made of high quality stainless steel. Made in Germany. Suitable for summer houses, mobile homes, individual water taps. The S variant is particularly compact in design.
Product information "UV system PURE 1.0 16 S watts for disinfecting water"

The UV water treatment system Pure 1.0 16W S from the manufacturer UST is used to inactivate germs such as bacteria and viruses. It is manufactured entirely in Germany and consists of highly polished stainless steel, this also applies to the connections. The manufacturer therefore gives a 10-year guarantee on the reactor! In the case of connections and reactors made of plastic, the aggressive UV radiation releases plastic particles over time, the components dry out and break.

What is UV water treatment?
Pathogenic bacteria or viruses can be inactivated with UV or UVC radiation. This means that they are no longer harmful to health! The treatment at a wavelength of 254nm ensures fast, effective and safe disinfection. This process is economical and has been used worldwide for many years. UV radiation enables water from germs to be used safely without the use of chlorine. The process is absolutely harmless and of course the water tastes much better than what is treated with chlorine.

Technical information
Due to the three existing connections, you can choose to install from one side or the other. The connection that is not required is closed. The sterilization capacity of 330 l/h is achieved with a extremely low power consumption of 16 watts. Please note that the water to be treated must be at least 95% clear (* SSK <95%), so good pre-filtration is absolutely necessary! You can find solutions here in our shop, please contact us if necessary. Thank you!

Maintenance
Exchange of the UV lamp every 12 months or max 9000 hours. The lamp can be easily loosened by screws and then replaced by pulling it out.

Connections: 1/2" inch

* SSK = spectral attenuation coefficient, i.e. that is, the water must be at least 95% transparent, otherwise pre-filtration is necessary

Technische Details - UV system PURE 1.0 16 S watts for disinfecting water

Electrical power: 16 W
Flow rate: 5.5 l / min max., 18 l / min with 400 J / m²
(Drinking water quality)
Temperature: 40 ° C max.
Operating pressure: 6 bar max.
Voltage: 85-264 VAC
Water connection: R 1/2 "inch
Length (reactor unit): 480 mm

Related items

UV-C replacement lamps for the UST UV water disinfection system UV-C 16 Watt
Power watt: UV-C 16 Watt
The UV-C water treatment systems of the Pure series, like all UV systems, require a regular change of the lamps in order to guarantee the disinfection performance during operation. Change intervals     UV-C 21 watts: approx. 8000 hours     UV-C 40 watts: approx. 8000 hours     UV-C 50 watt: approx. 8000 hours     UV-C 75 watt: approx. 8000 hours     UV-C amalgam 120 watts: approx. 10,000 hours What is UV water treatment? Pathogenic bacteria or viruses can be inactivated with UV or UVC radiation. This means that they are no longer harmful to health! Treatment at a wavelength of 254 nm ensures fast, effective and safe disinfection. This process is economical and has been used worldwide for many years. With UV irradiation, germs can be safely used in water without the use of chlorine. The process is absolutely harmless and of course the water tastes much better than what has been treated with chlorine. Maintenance Replacement of the UV lamps approximately every 12 months The lamps can be easily loosened with screws and then pulled out for replacement.

€60.50*