Prices incl. VAT plus shipping costs
The WatPass® SedimentGo water treatment system for sediment filtration is ideal for well water. The system can also be used for industrial applications to significantly reduce the sediment load behind backwashable filters.
- Order number: 1938-001
- EAN 4260728215889
WatPass® SedimentGo water treatment system for sediment filtration for well water. The system can also be used for industrial applications to significantly reduce the sediment load behind backwashable filters. It is used wherever conventional cartridge filters reach their limits.
The filter bed absorbs dirt very well and the running time between two backwashes is significantly longer than with conventional multi-layer filters. The water saving due to fewer backwashes is significant. Fine particles are safely removed and the hydrophilic surface enables significantly higher filter speeds to be achieved. Sand filters remove particles up to a size of 25 µm. Multi-layer filters ideally remove particles up to 12 µm in size. Our filter material removes particles smaller than 5 µm and, thanks to its extremely open surface, absorbs up to three times as much dirt as sand or multi-layer filters.
The filter granulate used consists of a special mineral which provides an extremely large surface for sediment filtration. It is perfect for filtering fine particles in the water.
The macroporous structure of the material ensures sediment filtration down to a size of less than 5 µm. The special surface and its high porosity make it a perfect filter medium for every application where the removal of very fine particles is important.
Advantages of the WatPass® SedimentGo
- very clear water
- low operating costs
- Relatively few backwashes necessary
- less filter material required, therefore lower transport costs
- a single filter material instead of multiple layers as in traditional multi-layer filters
- Filter material certified according to NSF Standard 61
The WatPass® SedimentGo consists of:
A tank (color may differ from the illustration) and a volume-controlled, very low-maintenance central control valve type Clack WS 1 Cl IA, with multilingual menu navigation (D, EN, ES, FR, PL) and color display.
Installation conditions for all system sizes
- Drinking or raw water connection
- Socket 230 V / 50 Hz
- Drainage connection
- Pressure reducer at> 6 bar
- House water filter at the entrance
- Connection thread: 1 inch
- Frost-free installation location
For installations according to DVGW guidelines, a DVGW-certified pipe separator must be used (not required for your own well).
The system is delivered by a forwarding agent. When ordering, please be sure to provide us with a telephone number under which you can be reached upon delivery.
Power consumption: 3Watt
Electrical connection 230V / 50HZ / 12V
min.-max. Water temperature: 5-30 ° C
Filter fineness: 5 µm