Go to homepage
0

WatPass® IronGo iron removal plant with catalyst granulate 1.3 m 3 /h

€1,069.00*

Content: 1 Stück

Prices incl. VAT plus shipping costs

Available, delivery time: 1-3 days

Well pump performance
Stück

Die Enteisenungsanlage WatPass® IronGo ist für verschiedene Brunnenpumpen geeignet. Die WatPass IronGo ist eine vollautomatisch arbeitende Enteisenungsanlage, die zum Einsatz kommt wenn die Eisenwerte höher als 0,2 mg/l liegen. Steuerkopf mit deutschem Menü.

 

Product number: 1477-001
Manufacturer: WatPass
EAN: 4250188802095
Product information "WatPass® IronGo iron removal plant with catalyst granulate 1.3 m 3 /h"

The WatPass IronGo iron removal system oxidizes dissolved iron from your water.

NEW - Control head Clack with German menu and colour display. The colour modes of the display make it easier to check the operating conditions (blue = everything is fine). If there is an error (red = malfunction), you can see this at a glance. The German menu makes setting up the system much easier.

Nothing has to be changed or refilled. The IronGo is therefore almost maintenance-free. Its performance is outstanding, it can filter up to 5 mg/l iron from the water. The installation is very simple. Even during backwashing, water can easily be removed. At a freely programmable time (approximately every 7 days), the concentrate is automatically disposed of through an outlet. A 3 m long drain hose is supplied and can be replaced by a longer garden hose if necessary.

An additionally available mounting block (accessory) serves to bridge the gap, but is not absolutely necessary for operation, although it is highly recommended. This helps to maintain the water supply with untreated water during maintenance work.

The system consists of:
GFK pressure bottle in different sizes (adapted to the performance), which is filled with high-quality filter material. The catalyst granulate is coated with manganese dioxide (MnO2). Flow-controlled central control valve type Clack WS 1 CI.

Functionality of the Katylasor granulate

Iron is usually present as bicarbonate in groundwater.  Due to the excess carbonic acid, iron is not filterable. As a catalyst, the filter material causes the transition from soluble Fe2+ to insoluble Fe3+, the resulting oxidation product iron hydroxide is easily filterable. In order to filter iron successfully, a pH value of at least 6.8 (better 7.0) is required, independent of the filter material used. If the pH value of your water is too low, please contact us specifically. This must then be raised by further filter technology in the first step. We then recommend the WatPass pHGO system.

Necessary installation conditions: Water connection Socket 230 V / 50 Hz, waste water connection, pressure reducer at > 6 bar

Product details:

- Flexible space-saving design
- Corrosion-resistant GFK pressure cylinder
- High-quality filter material
- Computer-controlled valve Clack WS 1 CI
- quantity control
- Extremely low maintenance
- Treatment of ferrous water
- Reduction of the orange-brown shade in the water

Areas of application: Well water, garden irrigation, laundries, industrial water use, Koi and fish ponds and all areas where too high an iron content in the water causes problems.

WatPass IronGo is available in different versions depending on the capacity required or the quantity of well water to be treated (the colour of the pressure bottle may vary in some versions). These can be found in the selection menu.

Installation service by specialized company: For the area of Central Germany we can arrange a specialized company, where you usually get an appointment within 2-4 weeks. The costs amount to approx. 400.00€ for normal installation situations. The executing company will clarify this with you in advance. We do not get any commission for the mediation! Please simply contact us if this service is interesting for you.

In the scope of supply contained (execution depending upon plant size):

Connection set 1 inch:

2x armoured hose 1 inch ÜM x 1 inch ÜM, L=1.000 mm; 1x drain hose, L= 2.000mm;
1x hose clamp 1/2 inch; 4x seals; 1x overflow hose, L= 2.000mm


Connection set 1 1/4 inch:

2x armoured hose 1 1/4 inch ÜM x 1 1/4 inch ÜM, L=1.000 mm; 1x drain hose,
L= 2.000mm; 1x hose clamp 1/2 inch; 1x overflow hose; L=2.000mm; 4x seals


Optional and additional:

Mounting block 1 inch IG x 1 inch AG

with blending, bypass function, sampling tap

Note: If the IronGo filter systems are to be used in drinking water applications, they must comply with the "Rules for Drinking Water Installations" according to DIN 1988 -200 in conjunction with DIN EN 1717:2011-08. Then it is necessary to install a pipe isolator to protect the public drinking water network.

Transport and costs: The article is delivered by a forwarding agent to avoid transport damage. Use our express service for a surcharge of 30.00€ (the forwarding agent will then deliver in two to three days).

 

 

Similar items

Single-stage house & well filter incl. Filter cartridge 20 Zoll
Single-stage house & well filter incl. Filter cartridge 20 Zoll
1-stage 20 "house and well water filtration with selectable filter The filter system is connected to the central water pipe at the entrance to the water meter.Filter housing and the filter head with vent valve are made of food-safe and high-strength plastic and are of extremely high quality. We have consciously decided in the housings from Prime Inventions GmbH against cheap solutions from dubious origins.Data for a filter unit:Total height: approx. 615 mm to the top of the ventilation valveDiameter of the housing head: 185 mm without connection nipple, with connection nipples approx. 225 mmCurb weight: 3.4 kgDimensions: total height to upper edge of vent valve: 343 mmEach individual housing is included as standard in the scope of delivery: wall bracket painted white with 4 stainless steel housing screws, 2 pieces 1 "plastic housing nipples.One housing key and 2 each of 1 "stopcocks are included in each complete filter system. General information about the Aqua Fidelo water filtration systems Aqua Fidelo is a water filtration system for individual houses, multiple residential units and industrial applications. It can be filtered city water and well water. When filtering well water, we recommend a prior water analysis in order to be able to optimally adapt the system. The system is available in the expansion of one to four housing units. This allows you to install Aqua Fidelo exactly to the required filter performance on site. Water output per minute Depending on the required amount of water, Aqua Fidelo is available in 10 Zoll (one accommodation unit) or 20 Zoll case (two accommodation units). The water performance of the sediment and activated carbon filters in the Aqua Fidelo 10 is around 20-25 l/min. And in the Aqua Fidelo 20” around 40-50 l/min., depending on the water line pressure. In the systems with iron filter cartridge, the water flow bottleneck is the iron filter cartridge. The 10” iron filter cartridges have a water capacity of approx. 9 l/min. The 20” iron filters have the double flow rate of 18 l / min. The limescale protection cartridges 10” and 20” have a water flow of 24 or 48 liters per minute Safety instructions: Only suitable for cold water operation. Installation must be carried out by a sanitary facility specialist! For safety reasons, we recommend a drain in the vicinity of the filter system. The installation is only with a pressure reducer, adjusted to max. 4.5 bar, and a backflow preventer allowed.   Information about the selectable filter cartridges Sediment filter standard Standard sediment filter 10 my fineness, made of polypropylene foam. Ideal for removing the following mechanical impurities from the water: sand, mud, rust, river mud, pollen… Service life: The filter cartridge must be replaced after 6 months (according to DIN 1988). Basically, 16.000 (10 ") or 26.000 (20") liters of water may be filtered within the 6 months. Technical data: Flow rate: 50 liters (10 ") or 60 liters (20") per minute (depending on the water pressure) Use only with cold water, protect against frost Sediment filter Premium (Pentek) Pentek ™ 2-stage sediment filter (outside 25 my, inside 1 my). In the outer layer, which is about 5 cm thick, all substances are held larger than 25 my, in the inner layer is an additional about 5 cm thick filter fleece with the filter density 1 my. As a result, the filter cannot clog so quickly compared to conventional sediment filters. Service life: The filter cartridge must be replaced after 6 months (according to DIN 1988). Technical data: Flow: 40 liters (10 ") or 60 liters (20") per minute (depending on the water pressure), Use only with cold water, protect against frost Carbon filter standard Standard activated carbon filter 10 my fineness. Filter performance: Odors and bad taste in the water, retention of small particles, retention of chlorine and other similar undesirable substances, retention of various heavy metals such as lead, etc., retention of organic compounds Service life: The filter cartridge must be replaced after 6 months (according to DIN 1988). Basically, 16,000 (10 ") or 26,000 (20") liters of water may be filtered within the 6 months. Technical data: Flow rate: 30 liters (10 ") or 40 liters (20") per minute (depending on the water pressure). Use only with cold water, protect against frost Carbonfilter Premium (Pentek) With this filter cartridge, it is possible to filter very large amounts of water at the house water inlet very fine. The fineness of 0.5µm is extremely small for this type of construction (otherwise in the domestic water inlet usually 5µm or 10µm). This makes it possible not only to remove odors from the water, but also to reduce some pollutants in the water. These include e.g.: heavy metals, pesticides and drug residues. Despite the high fineness of the filter cartridge, the water pressure only decreases by approx. 0,5 bar. Service life: The filter cartridge must be ready after 6 months (according to DIN 1988). Technical data: Flow: 20 liters (10 ") or 30 liters (20") per minute (depending on water pressure). Use only with cold water, protect from frost. Iron filter Effective reduction of dissolved iron in the water. Service life: The filter cartridge must be replaced after 6 months (according to DIN 1988). Technical data: Flow: approx. 9 liters (10 ") or 18 liters (20") per minute. Use only with cold water , protect against frost. Anti limescale cartridge The catalyst granule flows through the seed crystal principle. This precipitate lime is bound to the seed crystals and floats in the water with away. The procedure serves to protect the line and devices. Limescale deposits can be easily removed / wiped off after use. Lime removal, however, does not take place. Duration of use: When used with drinking water quality water without coarse sediments, the catalyst granulate lasts about 3 years. Technical data: Flow: 24 liters (10 ") or 48 liters (20") per minute (depending on the water pressure). Use only with cold water, protect against frost.

Variants from €229.00*
€0.00*
Details
WatPass® pHGo for raising the pH value of your well water
WatPass® pHGo for raising the pH value of your well water
If, as a well operator, you have low pH levels in your water and you want to use it as drinking water, the WatPass® pHGo offers you an excellent opportunity to increase the ph value in order to comply with the regulations of the Drinking Water Ordinance (pH 6.5-9, 5, TrinkwVo 2001/11). The system consists of a GRP pressure bottle, which is filled with a material for pH increase. A volume-controlled central control valve, type Clack WS 1 CI, currently represents the ultimate in control valves for such systems. Background Acidic water is corrosive. As the pH drops, the proportion of free carbonic acid increases, attacking all metals except stainless steel. This leads to leaks in the water installation over time. It also pollutes your drinking water with copper, zinc or aluminum. The WatPass pHGo contains a mineral that neutralizes the excess carbonic acid and immediately increases the pH value. The mineral is a consumable and must be refilled 1-3 times a year, depending on local conditions. Installation Behind the well pump or in front of the pressure vessel, if available. To ensure proper backwash, a pressure control must be installed in front of the neutralizer or a bypass of the existing pressure switch to allow the well pump to start delivering water when the neutralizer backwash valve is opened. Recommendation: To maintain the performance and service life of the device, a sediment filter should be installed. If the iron and manganese contents of your well water are too high and you want to use the WatPass IronGo, but the pH value is too low for the proper functioning of the device, then the WatPass phGo is the solution for this case! The WatPass phGo raises the pH of your well water to a level that allows the WatPass IronGo to be used for iron removal, even if the pH of your water is below 6.8. The installation is serial, before the WatPass IronGo and is very simple. Depending on the desired performance or the amount of well water to be treated, the WatPass phGo is also available in other versions. If the model offered by us does not fit, of course we can also sell you another, suitable device. Just ask us! Applications Well water, garden irrigation, laundries, hot water, koi and fish ponds and all areas where too low ph value of your water prevents iron ironing with the IronGo. Depending on the spatial conditions and equipment requirements, we recommend that you consider the purchase of the following accessories: Connection set 1 inch depending on system size 2x armored hose 1 inch ÜM x 1 inch ÜM, L = 1.000 mm; 1x drain hose, L = 2,000mm; 1x hose clamp 1/2 inch; 4x seals; 1x overflow hose, L = 2.000mm Connection set 1 1/4 inch depending on system size 2x armored hose 1 1/4 inch ÜM x 1 1/4 inch ÜM, L = 1.000 mm; 1x drain hose, L = 2,000mm; 1x hose clamp 1/2 inch; 1x overflow hose; L = 2.000mm; 4x seals Mounting block 1 inch IG x 1 inch AG with intersection, bypass function, sampling tap   Note: A water analysis and determination of what the water should be used for is a prerequisite for good advice and the selection of the right filter system. Well water may be subject to variations in composition due to various environmental influences. Therefore, a regular analysis should take place to be able to adapt the filter devices by For example, the regeneration cycle is changed. Installation instructions for connection to public networks: If the WP ManganGo filter systems are to be used in the drinking water sector, they must comply with the "Rules for drinking water installations" according to DIN 1988 -200 in conjunction with DIN EN 1717: 2011-08. Then it is necessary to install a backflow preventer to protect the public drinking water network. Necessary installation conditions: Water connection socket 230 V / 50 Hz, waste water connection, pressure reducer at> 6 bar Transport and costs: The item is delivered to avoid transport damage by freight carrier.

From €1,069.00*
Details
Connection set 1 1/4 inch forWatPass IronGo, ManganGo and others
Connection set 1 1/4 inch forWatPass IronGo, ManganGo and others
The connection set is suitable for the ironing machines WatPass IronGo (EV-B1 and EW-B1) and manganese removal systems such as WatPass ManganGo (3.3m³ / h and 4.4m³ / h) or just as it is needed. Delivery The connection set 1 1/4 inch contains: 2x armored hose DVGW 1 1/4" ÜM x 1 1/4 "ÜM, L = 1.000 mm; 1x drain hose, L = 2.000mm; 1x hose clamp 1/2"; 1x overflow hose; L = 2.000mm; 4x seals  

€114.90*
Assembly block 1 inch IG x 1 inch AG with intersection, bypass function, sampling tap
Assembly block 1 inch IG x 1 inch AG with intersection, bypass function, sampling tap
The assembly block is suitable for the AquaAvanti IronGo iron filter and manganese filter AquaAvanti ManganGo or where a bypass is needed. If there is limited space at the point of connection, the use of a mounting block is ideal. For safety reasons, it may be desirable to be able to bridge the device unit. For such cases, the mounting block (bypass) is ideal. The installation of a mounting block usually takes about one hour. Your installer will surely make you an offer. If you are not sure if you need a mounting block just ask him. The mounting block is working that way Position 1 When the two outer taps are closed and the middle tap is open, the water flows past the connected device (eg AquaAvanti Iron GO or AquaAvanti ManganGo). Position 2 If the two outer cocks are open and the middle closed, all the water flows through the connected devices. Note: If it is necessary to bridge the units, simply return the mounting block to position 1.

€98.00*
Connection set 1 inch for Aqua Avanti IronGo, ManganGo and others
Connection set 1 inch for Aqua Avanti IronGo, ManganGo and others
The connection set is suitable for the disinfestation systems AquaAvanti IronGo (except EV-B1 and EW-B1) and equipment for manganese removal such as AquaAvanti ManganGo (except models with 3,3m³/h and 4,4m³/h flowrate) or just as it is needed. Delivery The connection set 1 inch contains: 2x armored hose DVGW 1 "ÜMxÜM, L-1.000mm, drain hose and overflow hose each 1.500mm, 1/2" hose clamp, 4 gaskets

€94.90*