Automatic chlorination for water softening systems with clack control heads 3/8"

This fully automated chlorination system for water softening systems, with Clack control heads, produces active chlorine via brine electrolysis during regeneration. It is used for the sterilization of the ion exchange resin. The production of the chlorine can be adjusted depending on the investment conditions. For this purpose, the time duration (2-70 min) of the desired sterilization is set on the device.

The system can be used in conjunction with automatic control heads (Clack WS 1 CI). The control system consists of a multifunctional transformer, with socket connection. The built-in titanium electrode is located in a separate T-piece, which is installed in the brine suction line. When the system is activated, the power indicator lights green. During disinfection, a yellow LED lights up. Repeated chlorination helps to prevent germs. The chlorine is flushed out into the sewage system at the end of the regeneration.

Delivery: 1x automatic chlorination system including power supply, T-piece 3/8 "+ titanium electrode

Control (on the board Clack WS 1 CI)

Input voltage: 12 VAC
Output voltage: 2-6 VDC / 350 mA
Protection class: IP41

Power adapter

Input voltage 230 VAC - 50 Hz Output voltage 12 VAC
Protection class: IP54
Electrodes: Titanium electrodes with wiring / GRP reinforced PP housing
Connections Electrodes: T-connection 3/8 "BDP
Connection brine hose: 3/8 "