This fully automated chlorination system for water softening systems, with Clack control heads, produces active chlorine via brine electrolysis during regeneration. It is used for the sterilization of the ion exchange resin. The production of the chlorine can be adjusted depending on the investment conditions. For this purpose, the time duration (2-70 min) of the desired sterilization is set on the device.
The system can be used in conjunction with automatic control heads (Clack WS 1 CI). The control system consists of a multifunctional transformer, with socket connection. The built-in titanium electrode is located in a separate T-piece, which is installed in the brine suction line. When the system is activated, the power indicator lights green. During disinfection, a yellow LED lights up. Repeated chlorination helps to prevent germs. The chlorine is flushed out into the sewage system at the end of the regeneration.
Delivery: 1x automatic chlorination system including power supply, T-piece 3/8 "+ titanium electrode
This powerful LifeSaver® Cube ™ Replacement Filter fits only the Lifesaver Cube Water Filter. It reliably filters cysts, bacteria and even viruses out of the water. For this reason, the filter is also ideal for crisis operations or if your water supplier has problems with germs in the water. You can then simply save the decoction of the drinking water! The filter technology used has been used for many years by relief organizations and military personnel. So in our opinion, it just belongs in every household.
Advantages of Lifesaver Cube replacement filters
Food-safe material - free of BPA and BPS Includes a blind plug to protect the filter during cleaning and maintenance Filtering of up to 5000 l ** of water with a membrane filter (bacteria, viruses & cysts) high throughput (up to 1.2l / min) effective against cysts (99.99%), bacteria (99.9999%), viruses (99.9999%) BPA & BPS free made in the UK great value for money
Efficiency filtration
The tests were performed on the basis of the complete microbiological performance requirements of NSF / ANSI P231. It is good to know that Lifesaver has not only focused on the minimum of water filtration. The Lifesaver Cube water purifier exceeds the EPA guidelines for microbiological water purifiers.
Retention bacteria ***> 99.9999% (Log 6) Retention Viruses ***> 99.999% (Log 5) Retention Cysts ***> 99.99% (Log 4)
Failsafe ™ technology
The Lifesaver Cube has a mechanism that prevents you from getting inadequate filtered water from the filter. When the cartridge has reached the end of its life, the pores in the membranes are clogged by soiling and the filter will not let water through. The filter change announces itself by less and less water flows and the pumping becomes more and more laborious. As soon as there is no more water flowing through the filter you have to change it. You can always be sure that your water filter is effectively filtering contaminants out of the water, and you know when to change or clean the cartridge.
Important notes on use and storage
Unused, the filter cartridges can be stored for 3 years without hesitation. Already used cartridges can be stored according to the manufacturer's instructions for up to 3 years. If you want to be on the safe side, however, we recommend that you do not store a used cartridge for more than one year. Please do not let the filter cartridge dry out after first use! Caution - a wet or damp filter should never freeze.
Delivery: 1x Lifesaver Cube replacement filter
** Flow rate and filter performance depend on the composition, temperature and turbidity of the water being fed*** Tested by BCS, released on 20.05.2017. Meets the full performance requirements of NSF / ANSI P231 protocol
Mechanical leakage protection interrupts water supply to subsequent devices.Protect yourself from leaks and possible water damage. The Mini LCM water leakage safety device works mechanically with a compressed tissue tablet, which expands strongly in the presence of moisture, closing the integrated valve. The water supply of the following devices is interrupted.The valve is preferably mounted under the system to be secured and there glued or screwed to the ground. The insert (the tissue tablet) must be replaced after the LCM has been triggered by moisture. The inserts TB-2 are available in 2-packs. The Mini LCM is also available separately for use with reverse osmosis systems or other water filter housings.Connection: 1/4 "RO hoseSupplied accessories: adhesive strips and two wood screwsThe tissue tablet is already installed and the device is ready for use immediately upon delivery :-)
The connection set is suitable for the disinfestation systems AquaAvanti IronGo (except EV-B1 and EW-B1) and equipment for manganese removal such as AquaAvanti ManganGo (except models with 3,3m³/h and 4,4m³/h flowrate) or just as it is needed.
Delivery
The connection set 1 inch contains: 2x armored hose DVGW 1 "ÜMxÜM, L-1.000mm, drain hose and overflow hose each 1.500mm, 1/2" hose clamp, 4 gaskets
The assembly block is suitable for the AquaAvanti IronGo iron filter and manganese filter AquaAvanti ManganGo or where a bypass is needed. If there is limited space at the point of connection, the use of a mounting block is ideal. For safety reasons, it may be desirable to be able to bridge the device unit. For such cases, the mounting block (bypass) is ideal. The installation of a mounting block usually takes about one hour. Your installer will surely make you an offer. If you are not sure if you need a mounting block just ask him. The mounting block is working that way Position 1 When the two outer taps are closed and the middle tap is open, the water flows past the connected device (eg AquaAvanti Iron GO or AquaAvanti ManganGo). Position 2 If the two outer cocks are open and the middle closed, all the water flows through the connected devices. Note: If it is necessary to bridge the units, simply return the mounting block to position 1.
The SANUNO pre-filter kit from Carbonit is compatible with all SANUNO countertop filters.
Purpose
With the pre-filter kit, you can supplement your existing SANUNO table-top filter and thus receive a multi-stage filter system. In addition to activated carbon filtration, you can now also decalcify your water or expand it with another filter cartridge. Sediment filters, lime treatment, nitrate filters and other variants are conceivable. The SANUNO pre-filter kit can be easily connected to an existing SANUNO housing.
The assembly block is suitable for the AquaAvanti IronGo iron filter and manganese filter AquaAvanti ManganGo or where a bypass is needed. If there is limited space at the point of connection, the use of a mounting block is ideal. For safety reasons, it may be desirable to be able to bridge the device unit. For such cases, the mounting block (bypass) is ideal. The installation of a mounting block usually takes about one hour. Your installer will surely make you an offer. If you are not sure if you need a mounting block just ask him. The mounting block is working that way Position 1 When the two outer taps are closed and the middle tap is open, the water flows past the connected device (eg AquaAvanti Iron GO or AquaAvanti ManganGo). Position 2 If the two outer cocks are open and the middle closed, all the water flows through the connected devices. Note: If it is necessary to bridge the units, simply return the mounting block to position 1.
Key for opening the housing and replacing the filters for the "Kalko Innova" limescale protection devices and the "Aqua Fidelo" series house and well filters (manufacturer Prime Inventions).
The inner diameter of the key is 154.5 mm between the pins and 148.2 mm across the pins. The tenon width is 10.5 mm. The pivot distance 19 mm.
The key fits the 10" and the 20" housing.
Adapter for connecting plug-in connections of the AquaAvanti Inline system or to suitable reverse osmosis systems to 3/8 inch connections. The adapter enables AquaAvanti inline systems and reverse osmosis systems to be connected to 3/8 inch connections (armored hoses, angle valves, etc.).
You can also use it to connect our Ultra Membrane Filter Viruses & Bacteria to refrigerators with 1/4 inch hoses. For this you need two of these adapters.
The adapter is NSF certified.
Das GREENSANDPLUS™ Filtergranulat bestehet aus Glaukonit (komplexes Silikat) und wird zur Entfernung von Eisen, Mangan und Schwefelwasserstoff aus Wasser verwendet. Die Beschichtung aus Mangandioxid wirkt als Katalysator bei der Oxidation von gelöstem Eisen und Mangan. Der Kern aus Silikatsand ist mit einer Mangandioxidschicht verschmolzen. Der Kern macht GREENSAND PLUS™ widerstandsfähig für Aufbereitungsprozesse mit Wässern, die geringe Wasserhärten aufweisen, einen sehr kleinen Silikatgehalt haben oder einen geringen Salzgehalt aufweisen. Es zeichnet sich durch einen hohe Fließgeschwindigkeit im Filter aus, und ist für die kontinuierliche Regeneration, als auch für die diskontinuierliche Regeneration gut geeignet.
GREENSAND PLUS™ wird in der nicht regenerierten Form geliefert und muss vor Inbetriebnahme mit einer Kaliumpermanganatlösung aktiviert werden. Wir empfehlen einen Einwirkzeit der Kaliumpermanganatlösung von mind. 12-24 Stunden. Danach wird die Kaliumpermanganatlösung ausgespült und das Filtermaterial ist einsatzbereit.
Adapter for 1/4 inch connecting plug-in connections to 1/2" AG screw connections. The adapter allows the connection of various systems. It can also be used to connect our Ultra Membrane Filter Viruses & Bacteria to 1/2" armored hoses. The adapter is compliant with FDA, WRAS, ANSI/NSF-51, 61, ACS, KTW and DVGW-W270 guidelines. Suitable for potable water use, beverages and pneumatic systems.
Adapter for 1/4 inch connecting plug-in connections to 3/8" AG screw connections. The adapter allows the connection of various systems.
It can also be used to connect our Ultra Membrane Filter Viruses & Bacteria to 3/8" armored hoses.
The adapter is compliant with FDA, WRAS, ANSI/NSF-51, 61, ACS, KTW and DVGW-W270 guidelines. Suitable for potable water use, beverages and pneumatic systems.
Adapter for connecting plug-in connections to 3/8" IG screw connections. The adapter allows the connection of various systems.
It can also be used to connect our Ultra Membrane Filter Viruses & Bacteria to 3/8" armored hoses.
The adapter is compliant with FDA, WRAS, ANSI/NSF-51, 61, ACS, KTW and DVGW-W270 guidelines. Suitable for potable water use, beverages and pneumatic systems.
Adapter for connection of AquaAvanti Inline system plug connections or to suitable Reverse Osmosis systems at 3/8 inch connections. The adapter enables the connection of AquaAvanti Inline systems and reverse osmosis systems to 3/8 inch connections (armoured hoses, angle valves, etc.). The adapter is NSF certified.
Universal flange DN 25 for pressing SYR
If you do not yet have a suitable flange for the system, you will need this component to connect your SYR LEX PLus 10 Connect soft water system.
This flange is suitable for DRUFI +, IT 3000, IT 4000, LEX Connect individual softening systems 10 to 30, Safe-T and Safe-T Connect as well as other SYR articles. The housing is made of gunmetal and has press connections on both sides (Viega press system for use in copper and stainless steel pipe installations). The installation position can be designed as desired.
It is best to order the flange at the same time when you decide on a water softener from SYR.
Replacement chlorine cell for the fully automatic chlorination system for water softening systems with Clack control heads, which can be optionally installed in our WatPass Kalk systems. During regeneration, the system produces active chlorine using a so-called brine electrolysis process and is responsible for disinfecting the ion exchange resin. As a rule, the chlorine cell must be replaced every 2-3 years.
Replacement housing with header for all 10" Aqua Fidelo home and well water filtration systems and Kalko Innova limescale protection devices. Connection 1 1/2"
Scope of delivery
1x 10" inch filter housing, 1x double nipple, ball valves, wall bracket and screws, and 1" reducers included.
Replacement housing with header for all 20" Aqua Fidelo home and well water filtration systems and Kalko Innova limescale protection devices. Connection 1 1/2"
Scope of delivery
1x 20" inch filter housing, 1x double nipple, ball valves, wall bracket and screws, and 1" reducers included.