Dora's Stainless Steel Drinking & Vacuum Bottle 1000 ml

The set contains one main and one extension filter stage (two-stage undersink system) of the Aqua Avanti Inline series with quick-change housings. The main filter stage is the basic system, the extension filter stages are switched on. The filter stages are connected in the selectable order (please do not interchange) before the drinking water intake; all standard necessary connections, hoses and fittings are included. Manufacturers are the companies Prime Inventions and Carbonit of an exclusive cooperation. Production takes place in Germany. Advantages of the Aqua Avanti Inline system compared to conventional filter housings Forget about dismantling and unscrewing filter housings to change filters. With the AA Inline filter system you can change filter cartridges in seconds. Simply remove the filter cartridge by turning it counterclockwise and insert a new filter cartridge the other way around. Done. You no longer need a housing key. Since you do not come into contact with the inside of the filter cartridge, the exchange is very hygienic. Connections (standard connection set is included) The included faucet adapter has a 3/8" standard thread and thus fits most of the faucets we offer. An adaptation to other threads e.g. UNS 7/16-24 is of course optionally possible. For easy connection to the corner tap under the sink, a high-quality European connection adapter JG ASV-7 is supplied with each main filter stage, so that you do not need an additional corner valve if you have a 3/inch cold water connection. Also a leakage protection is supplied, which provides you with additional safety. Additional accessories As an alternative to the enclosed connection set, you can find suitable adapters in the Accessories & Spare Parts category for easier, space-saving installation.  Optionally available are: - Plug-in connector - Adapter DM 3/8 inch to 3/8 inch 90 degree - 3/8 inch connection hose, AA inline filter   Description of the selectable filters EM Premium 5 Inline Combination of water filtration and water revitalization in a filter cartridge It has been possible to build the successful filter cartridge EM Premium 5 as an inline quick-change system. The filter and aeration characteristics of the water are identical for both filter cartridges. The EM ceramic is "baked in" into the filter cartridge during production as a powder. This creates a very large contact surface with the water. Together with the proven filter performance of the Carbonit NFP Premium filter technology results in the ideal water filtration. Among other things, this ceramic reduces the surface tension of the water and reduces the size of the cluster structures. Thus, the taste of the water is described by most people as softer or rounder. Filter change: Close the water supply valve, unscrew the old filter cartridge in a clockwise direction and pull it downwards. Insert the new filter cartridge from below and screw it in counterclockwise until it stops. Reopen the water supply. Use: The filter cartridge must be changed after six months. In principle, up to 10.000 liters of water may be filtered during this time. An earlier change may, however, be necessary if the water flow is noticeably reduced. This is usually an indication of increased occurrence of fine particles in unfiltered water. The water flow is now about 2 liters / min. Use only with cold water, protect against frost. Weight: 830gr EM IFP Premium 5 Inline This filter cartridge was manufactured by CARBONIT® based on NFP Premium exclusively for the company Prime Inventions. Due to the mechanical filter fineness of <0.45 µm, it has a high chemical-physical adsorption performance against chemical substances. The addition of EM ceramic gives it special properties. Among other things, this ceramic reduces the surface tension of the water and reduces the size of the cluster structures. Thus, the taste of the water is described by most people as softer or rounder. The filter cartridges type IFP Premium are ideal for the retention of possible pollutants in drinking water systems. Pollutants of anthropogenic origin, which could accumulate in the organism, are reliably removed and stored. The IFP activated carbon filter block has a commercially available, thin wall for liquid treatment at low line pressure. Use: The filter cartridge must be changed after six months. In principle, up to 5.000 liters of water may be filtered during this time. An earlier change may, however, be necessary if the water flow is noticeably reduced. This is usually an indication of increased occurrence of fine particles in unfiltered water. The water flow is now about 4 liters / min. Use only with cold water, protect against frost. Weight: 770 gr. Decalcification Inline The flowed through ion exchange resin reduces the hardness of the water. The decalcifying cartridge improves the taste of cold and hot drinks (especially to improve the aroma of coffee and tea) and protects household appliances against calcification. Use: The water flow should not exceed about 2 l / min. so that a noticeable descaling is guaranteed. The possible duration of use depends on the degree of hardness of the input water. Depending on the raw water hardness up to 1,900 l (hardness 5-10 dh) or 450 l (degree of hardness 11-25 dh) can be achieved as static quantity. The cartridge must be changed, if the typical chalk appearances like a film is built on the surface of the tea beverage, loss of tea aroma / coffee or calcification deposits on surfaces. According to DIN 1988, a change is required after 6 months at the latest. Anti-limescale  Inline Use for chemical-free limescale protection in the Aqua-Avanti (Aqua Kalko) Inline Filter System. The flowed through catalyst granule works on the seed crystal principle. This precipitate lime is bound to the seed crystals and floats in the water with away. The procedure serves to protect the line and devices. Limescale deposits are easier to remove after use but removal of the lime does not take place. Use: The water flow should not exceed approx. 3 l / min. When used with water in drinking water quality, the catalyst granules sustains about 3 years. Sediment filter Inline The sediment filter Inline is provided with an antibacterial protection. Due to the special winding, the protection is distributed over a very large area. Upon contact of germs with the protective surface of their propagation process is interrupted. Textile coarse and prefilter e.g. for removal of heavily particulate polluted or polluted (turbidity) input water. Water that contains a high proportion of sediments affects the visual value of beverages and can in the worst case have a damaging effect on your system components. Use: The filter cartridge must be changed after six months. In principle, up to 10.000 liters of water may be filtered during this time. An earlier change may, however, be necessary if the water flow is noticeably reduced. The water flow is now up to 20 liters / min depending on water pressure and filter housing. Protect from frost.

The set contains one main and two extension filter stages (three-stage undersink system) of the Aqua Avanti Inline series with quick-change housings. The main filter stage is the basic system, the extension filter stages are switched on. The filter stages are connected in the selectable order (please do not interchange) before the drinking water tapping; all standard necessary connections, hoses and fittings are included. Manufacturers are the companies Prime Inventions and Carbonit of an exclusive cooperation. Production takes place in Germany. Advantages of the Aqua Avanti Inline system compared to conventional filter housings Forget about dismantling and unscrewing filter housings to change filters. With the AA Inline filter system you can change filter cartridges in seconds. Simply remove the filter cartridge by turning it counterclockwise and insert a new filter cartridge the other way around. Done. You no longer need a housing key. Since you do not come into contact with the inside of the filter cartridge, the exchange is very hygienic. Connections (standard connection set is included) The included faucet adapter has a 3/8" standard thread and thus fits to most of our offered faucets. An adaptation to other threads e.g. UNS 7/16-24 is of course optionally possible. For easy connection to the corner tap under the sink, a high-quality European connection adapter JG ASV-7 is supplied with each main filter stage, so that they do not need an additional corner valve with existing 3 / inch cold water connection. Also a leakage protection is supplied, which provides you with additional safety. Additional accessories As an alternative to the enclosed connection set, you can find suitable adapters for easier, space-saving installation in the Accessories & Spare Parts category. Optionally available are: - Plug-in connector - Adapter DM 3/8 inch to 3/8 inch 90 degree - 3/8 inch connection hose, AA inline filter Information about the selectable filter cartridges EM Premium 5 Inline filter This filter cartridge was manufactured by CARBONIT® based on the NFP Premium exclusively for Prime Inventions. Due to the mechanical filter fineness of < 0.45 ?m, it has a high chemical-physical adsorption performance against chemical substances. Bacteria, micro- or nanoplastics, heavy metals, pesticides and hormones can be filtered. The filter cartridges produced by CARBONIT® combine water filtration and a taste improvement of the water. For the production, a special EM ceramic is added to the activated carbon filter during the process of sintering. This ceramic causes, among other things, a reduction of the surface tension of the water and the reduction of the cluster structures. As a result, the taste of the water is described by most people as softer or rounder. The filter cartridges are ideal for retaining potential pollutants in drinking water systems.  Pollutants of anthropogenic origin, which could accumulate in the organism, are reliably removed and stored. The activated carbon filter block has a commercially available thin wall for liquid treatment at low line pressure. Usage: The filter cartridge must be replaced after six months (DIN 1988). In principle, up to 10,000 liters of water may be filtered within this time. However, an earlier change may be necessary if the water flow is noticeably reduced. This is usually an indication of increased occurrence of fine particles in the unfiltered water. The new water flow rate is approx. 2 liters/min. Use only with cold water, protect from frost. Weight: 830gr EM IFP Premium 5 Inline This filter cartridge was manufactured by CARBONIT® based on NFP Premium exclusively for the company Prime Inventions. Due to the mechanical filter fineness of <0.45 µm, it has a high chemical-physical adsorption performance against chemical substances. The addition of EM ceramic gives it special properties. Among other things, this ceramic reduces the surface tension of the water and reduces the size of the cluster structures. Thus, the taste of the water is described by most people as softer or rounder. The filter cartridges type IFP Premium are ideal for the retention of possible pollutants in drinking water systems. Pollutants of anthropogenic origin, which could accumulate in the organism, are reliably removed and stored. The IFP activated carbon filter block has a commercially available, thin wall for liquid treatment at low line pressure. Use: The filter cartridge must be changed after six months. In principle, up to 5.000 liters of water may be filtered during this time. An earlier change may, however, be necessary if the water flow is noticeably reduced. This is usually an indication of increased occurrence of fine particles in unfiltered water. The water flow is now about 4 liters / min. Use only with cold water, protect against frost. Weight: 770 gr. Decalcification Inline The flowed through ion exchange resin reduces the hardness of the water. The decalcifying cartridge improves the taste of cold and hot drinks (especially to improve the aroma of coffee and tea) and protects household appliances against calcification. Use: The water flow should not exceed about 2 l / min. so that a noticeable descaling is guaranteed. The possible duration of use depends on the degree of hardness of the input water. Depending on the raw water hardness up to 1,900 l (hardness 5-10 dh) or 450 l (degree of hardness 11-25 dh) can be achieved as static quantity. The cartridge must be changed, if the typical chalk appearances like a film is built on the surface of the tea beverage, loss of tea aroma / coffee or calcification deposits on surfaces. According to DIN 1988, a change is required after 6 months at the latest. Anti-limescale Inline Use for chemical-free limescale protection in the Aqua-Avanti (Aqua Kalko) Inline Filter System. The flowed through catalyst granule works on the seed crystal principle. This precipitate lime is bound to the seed crystals and floats in the water with away. The procedure serves to protect the line and devices. Limescale deposits are easier to remove after use but removal of the lime does not take place. Use: The water flow should not exceed approx. 3 l / min. When used with water in drinking water quality, the catalyst granules sustains about 3 years. Sediment filter Inline The sediment filter Inline is provided with an antibacterial protection. Due to the special winding, the protection is distributed over a very large area. Upon contact of germs with the protective surface of their propagation process is interrupted. Textile coarse and prefilter e.g. for removal of heavily particulate polluted or polluted (turbidity) input water. Water that contains a high proportion of sediments affects the visual value of beverages and can in the worst case have a damaging effect on your system components. Use: The filter cartridge must be changed after six months. In principle, up to 10.000 liters of water may be filtered during this time. An earlier change may, however, be necessary if the water flow is noticeably reduced. The water flow is now up to 20 liters / min depending on water pressure and filter housing. Protect from frost.

This flexible “single stage” drinking water filter system offering, is easy to install at an affordable price. Simple installation, either with a not included special tap, which is small and elegant. We guarantee CARBONIT® quality of all the tap water coming out of your faucet. The hardware is kept out of sight under the basin. Water filtration in the kitchen for yielding filtered drinking water, usable even with high concentration levels of lead and copper, Pesticides or limescale …. (depending from the filter cartridge you choose). You´ll get clean and fresh water which is very suitable for the preparation of beverages, water for cooking, etc. The device is made for installation under the basin between a corner valve and the existing water tap. The VARIO-HP is although possible to installed between the corner valve and the existing faucet fixture. Scope of supply: Complete filter device with comprehensive installation material and a water filter cartridge of your choice (depending on what you need and what you like to have).   Available filter cartridges NFP Premium We recommend the use of the NFP Premium Drinking Water Cartridge for removing buildups of such substances in domestic pipe lines as lead and copper. This filter cartridge is utilised in all CARBONIT® Drinking Water Filters, due to its high performance capability in the face of possible drinking water contaminants and the excellence of its hygienic characteristics. Service life: The filter cartridge must be replaced after 6 months (in accordance with DIN 1988). As a basic rule, 10,000 liters of water can be filtered within a six-month period. Earlier replacement can however be necessary when the water flow becomes noticeably reduced. Earlier replacement is not the result of any deficiency in the filter used, but rather a sign of the increased presence of fine particles in unfiltered water. Filter fineness: approx. 0.45 µm Flow: approx. 2 liters per minute (depending on water pressure). For technical reasons, only for use with cold water, protect from freezing IPF Puro Combined cartridge of activated carbon and axially integrated capillary membrane. Awarded the Innovation Prize of Saxony-Anhalt in 2002. This filter cartridge is recommended for low water pressure or when it´s necessary to get 6-8l / min. Activated carbon has a large surface that under the adsorbent used in the chemical, medicine and water and wastewater treatment. As sintered activated carbon block filter in accordance with scientifically verified CARBONIT® technology removes unwanted primarily the color, taste and odor compounds from gases, vapors and liquids unparalleled filtration results scientifically verified. Membrane filtration for reliable retention of pathogenic germs. We filter in the field of micro-filtration. Please note laid down by the legislature semiannual filter change (backwash filter must be flushed every 2 months). Filter performance: Combination of two technologies for high water flow in special applications (medical, water dispensers). Hospital Hygienist document as Legionella, Pseudomonas, and fungi (eg. Aspergillus) the tap water can be a source of transmission. Scientific studies of the Institute of Hygiene and Public Health, University of Bonn show that these stresses can occur not only in hospitals but also in the home environment. Here immune-compromised Individuals terminal Filters are primarily a risk offer protection. Filtration capacity of about 5,000 liters. Scientifically checked filter composition. For the filtration of bacteria and organic substances. Meets ANSI / NSF Standard 53 (cyst & turbidity reduction) and EPA standards. The epdwa guidelines for a filter fineness of at least 1 micron (1 micron) in nominal terms and a recommended filter change every 6 months are observed. Everything for your safety! About technical reasons is only for use with cold water allowed, protect from frost. Recommended filter change every 6 months. IFP KDF Recommended for water filtration in the kitchen and bathroom at the point of use, especially at high heavy metal loads (lead, copper, iron, nickel, chromium, cadmium, aluminum, mercury, arsenic, zinc retention up to 99%). It has antibacterial, fungicidal and algae protection and additionally reduces chlorine, chloroform, lindane, DDT, atrazine, drug residues and polar pesticides> 70%. Service life: The filter cartridge must be replaced after 6 months (according to DIN 1988). Basically, within the 6 months 10,000 liters of water may be filtered. Technical data: Filter fineness: approx. 1.5 µm, flow: approx. 1,5Liters per minute (depending on water pressure), temperature: Use only with cold water, protect against frost EM Puro This cartridge filter is especially manufactured for Prime Inventions on the basis of the two-stage IFP Puro. It combines the particular characteristics of a carbon block sediment filter with a microfiltration of 0.15 microns through the internal Capillary membrane. Even with a high contamination which may accumulate within the microorganism can be reliably retained but still leaves the minerals untouched. The EM Puro is ideal for low pressure and reduces the growth of bacteria. The capillary membrane Ster-OTap® is in accordance to the ANSI/NSF Standard 53 (Cyst and Turbidity reduction) The active carbon block has been tested and certified by the German food and law standard association and is also considered environmentally friendly from recycled resources. With the additional mixture of EM Ceramic powder it enhances the special characteristics within the cartridge filter, thus leaving the water tasting fresh and full-bodied for many of our users. Service life: The cartridge filter must be replaced after 6 months (according to DIN 1988). Basically, 5,000 liters of water must be filtered within 6 months. However, earlier change may be necessary if the water flow is noticeably reduced. Earlier replacement is not a defect of the filter used, but an indication of increased presence of fine particles in unfiltered water. Filtration rating: 0.15 microns (membrane) / 5 micron (activated carbon) Dimensions: Length 9 3/4 „, da = 70 mm Flow: about 6-8 liters per minute, dependent on the water pressure. For technical reasons, use only with cold water, protect from frost. EM Premium 5 Together with the proven filter performance of the CARBONIT® NFP Premium filter technology, the ideal water filtration results: EM Ceramic causes, among other things, a reduction of the surface tension of the water and the reduction of the cluster structures. As a result, most of the users find that the taste of the water has improved. The coconut-based activated carbon block filter focuses on the chemical-physical removal of undesirable ingredients in drinking water, eg. B. by the influences of the house installation. Service life: The filter cartridge must be replaced after 6 months (according to DIN 1988). Basically, within the 6 months 10,000 liters of water may be filtered.Technical data: Filter fineness: approx. 0.45 µm, flow rate: approx. 2 liters per minute (depending on water pressure), Temperature: Use only with cold water, protect against frostSediment Filter The filter is provided with antibacterial protection. Due to the special winding, the protection is distributed over a very large area. Upon contact of germs with the protective surface of their propagation process is interrupted. Textile coarse and prefilter e.g for removal of heavily particulate polluted or polluted (turbidity) input water. Service life: The filter cartridge must be replaced after 6 months (according to DIN 1988). Basically, within the 6 months 10,000 liters of water may be filtered.Technical data: Flow rate: approx. 20 liters per minute (depending on the water pressure) Use only with cold water, protect against frost Decalcification cartridge The decalcifying cartridge improves the taste of cold and hot drinks (especially to improve the aroma of coffee and tea) and protects household appliances from calcification. The flowed through ion exchange resin reduces the hardness of the water. Use: The water flow should not exceed about 2 l/min. so that a noticeable decalcification is guaranteed. The possible duration of use depends on the degree of hardness of the input water. Depending on the raw water hardness up to 1,900 l (degree of hardness 5-10 dh) or 450 l (degree of hardness 11-25 dh) can be achieved as static quantity. The granules in the cartridge can be replaced independently. The change is made when the typical features of the calf such as tea skin, aroma loss in tea / coffee or lime deposits on surfaces occur again. According to DIN 1988, a change of granules is required after 6 months at the latest. Here you will find the ion exchange resin for the granule change.Lime protection cartridge The flowed through catalyst granules works on the seed crystal principle. This precipitate lime is bound to the seed crystals and floats in the water with away. The procedure serves to protect the line and devices. Limescale deposits are easier to remove after use but lime removal does not take place. Use: The water flow should not exceed about 3 l / min.. When used with water in drinking water quality without coarse sediments, the catalyst granules maintaining about 3 years. Coarse impurities in the water can cause the surface of the granulate to clog and require rapid replacement.

Water filter under-sink solution for the removal of lime (decalcification by ion exchange) of the AquaAvanti Inline series with the innovative quick-change housings. This main filter stage is the basic system that can be used as the sole filter system. In addition, it is the basis for one or two expansion stages. Description of the filter descaling AquaAvanti Inline The ion exchange resin flowed through reduces the hardness of the water. The descaling cartridge improves the taste of cold and hot drinks (especially to improve the aroma of coffee and tea) and protects household appliances from calcification.  Usage: The water flow should not exceed approx. 2 l/min. to ensure noticeable descaling. The possible service life depends on the hardness of the input water. Depending on the raw water hardness, up to 1,900 l (degree of hardness 5-10 dh) or 450 l (degree of hardness 11-25 dh) can be achieved as a standing volume. The cartridge must be replaced when the limescale-typical phenomena such as tea skin, loss of aroma with tea/coffee or limescale deposits on surfaces reappear. According to DIN 1988, a change is required after 6 months at the latest. Advantages of the Aqua Avanti Inline system compared to conventional filter housings Forget about dismantling and unscrewing filter housings to change filters. With the AA Inline filter system, you can change filter cartridges in seconds. Simply remove the filter cartridge by turning it counterclockwise and insert a new filter cartridge the other way around. Done. You no longer need a housing key. Since you do not come into contact with the inside of the filter cartridge, the exchange is very hygienic. Connections (standard connection set is included) The included faucet adapter has a 3/8" standard thread and thus fits to the faucets offered by us mesiten of. An adaptation to other threads e.g. UNS 7/16-24 is of course optionally possible. For easy connection to the corner tap under the sink, a high-quality European connection adapter JG ASV-7 is supplied with each main filter stage, so that they do not need an additional corner valve with existing 3 / inch cold water connection. Also a leakage protection is supplied, which provides you with additional safety. Additional accessories As an alternative to the enclosed connection set, you can find suitable adapters in the Accessories & Spare Parts category for easier, space-saving installation. Optionally available are: -Connector -Adapter DM 3/8 inch to 3/8 inch 90 degree -3/8 inch connection hose, AA inline filter -flow regulator 1.9l min 3/8 inch inline Note: Flow rate should be limited to approximately 2l/min for good softening performance. Use only with cold water. Protect from frost.