Main and two enhancement filter level AA inline (three-stage) Sedmiment + Entkalkung + EM Premium 5

409,90 €*

Indhold: 1 Stück

Tilgængelig, leveringstid: 3 Tage

Filterkombination
Stück
Varenummer: 1337-001
Hersteller: Prime Inventions
EAN: 4250188801913
Manufacturer of this three-stage water filter system are the companies Prime Inventions and Carbonit of an exclusive cooperation. Housing, water filter cartridge, connection material and a leakage protection are already included in the set.Made in Germany.
Produktinformation "Main and two enhancement filter level AA inline (three-stage) Sedmiment + Entkalkung + EM Premium 5"

Main and two extension filter stages (three-stage under-table system) of the Aqua Avanti inline series with quick-change housings.
The main filter level is the basic system, the extension filter levels are switched on. The filter stages are switched in the selectable order (please do not swap them) before the drinking water is removed; All standard connections, hoses and connections are included.

Description of the Aqua Avanti Inline system
Forget about dismantling and screwing on filter housings for filter replacement. With the AA inline filter system you can change the filter cartridges in seconds. Simply remove the filter cartridge by turning it to the left and, conversely, insert a new filter cartridge. Finished. You do not need a case key anymore. Since you do not come in contact with the interior of the filter cartridge, the exchange is very hygienic.

Connections: Standard connection kit (included): The enclosed tap adapter has a 3/8 "standard thread and thus fits to offered faucets. An adaptation to other threads z. B. UNS 7 / 16-24 is optional. For easy connection to the corner tap under the sink, a high-quality European connection adapter JG ASV-7 is supplied with each main filter stage.

As an alternative to the enclosed connection set, you can select the "AA Inline installation set" (must be purchased separately) in the Accessories & Spare Parts category. This makes it easier to lay and connect the hoses in difficult installation situations under the sink. It consists of: 2x plug-in connector PP221212W, 2x angle connector PP0312W, adhesive dots to hold when screwing on, hose 1.5m.

Description of the selectable filters

EM Premium 5 Inline

Combination of water filtration and water revitalization in a filter cartridge

It has been possible to build the successful filter cartridge EM Premium 5 as an inline quick-change system. The filter and aeration characteristics of the water are identical for both filter cartridges. The EM ceramic is "baked in" into the filter cartridge during production as a powder. This creates a very large contact surface with the water. Together with the proven filter performance of the Carbonit NFP Premium filter technology results in the ideal water filtration. Among other things, this ceramic reduces the surface tension of the water and reduces the size of the cluster structures. Thus, the taste of the water is described by most people as softer or rounder.

Filter change: Close the water supply valve, unscrew the old filter cartridge in a clockwise direction and pull it downwards. Insert the new filter cartridge from below and screw it in counterclockwise until it stops. Reopen the water supply.

Use: The filter cartridge must be changed after six months. In principle, up to 10.000 liters of water may be filtered during this time. An earlier change may, however, be necessary if the water flow is noticeably reduced. This is usually an indication of increased occurrence of fine particles in unfiltered water. The water flow is now about 2 liters / min. Use only with cold water, protect against frost.

Weight: 830gr

EM IFP Premium 5 Inline

This filter cartridge was manufactured by CARBONIT® based on NFP Premium exclusively for the company Prime Inventions. Due to the mechanical filter fineness of <0.45 µm, it has a high chemical-physical adsorption performance against chemical substances. The addition of EM ceramic gives it special properties. Among other things, this ceramic reduces the surface tension of the water and reduces the size of the cluster structures. Thus, the taste of the water is described by most people as softer or rounder.

The filter cartridges type IFP Premium are ideal for the retention of possible pollutants in drinking water systems.

Pollutants of anthropogenic origin, which could accumulate in the organism, are reliably removed and stored. The IFP activated carbon filter block has a commercially available, thin wall for liquid treatment at low line pressure.

Use: The filter cartridge must be changed after six months. In principle, up to 5.000 liters of water may be filtered during this time. An earlier change may, however, be necessary if the water flow is noticeably reduced. This is usually an indication of increased occurrence of fine particles in unfiltered water. The water flow is now about 4 liters / min. Use only with cold water, protect against frost.

Weight: 770 gr.

Decalcification Inline

The flowed through ion exchange resin reduces the hardness of the water. The decalcifying cartridge improves the taste of cold and hot drinks (especially to improve the aroma of coffee and tea) and protects household appliances against calcification.

Use: The water flow should not exceed about 2 l / min. so that a noticeable descaling is guaranteed. The possible duration of use depends on the degree of hardness of the input water. Depending on the raw water hardness up to 1,900 l (hardness 5-10 dh) or 450 l (degree of hardness 11-25 dh) can be achieved as static quantity. The cartridge must be changed, if the typical chalk appearances like a film is built on the surface of the tea beverage, loss of tea aroma / coffee or calcification deposits on surfaces.

According to DIN 1988, a change is required after 6 months at the latest.

Anti-limescale Inline

Use for chemical-free limescale protection in the Aqua-Avanti (Aqua Kalko) Inline Filter System. The flowed through catalyst granule works on the seed crystal principle. This precipitate lime is bound to the seed crystals and floats in the water with away. The procedure serves to protect the line and devices. Limescale deposits are easier to remove after use but removal of the lime does not take place.

Use: The water flow should not exceed approx. 3 l / min. When used with water in drinking water quality, the catalyst granules sustains about 3 years.

Sediment filter Inline

The sediment filter Inline is provided with an antibacterial protection. Due to the special winding, the protection is distributed over a very large area. Upon contact of germs with the protective surface of their propagation process is interrupted. Textile coarse and prefilter e.g. for removal of heavily particulate polluted or polluted (turbidity) input water. Water that contains a high proportion of sediments affects the visual value of beverages and can in the worst case have a damaging effect on your system components.

Use: The filter cartridge must be changed after six months. In principle, up to 10.000 liters of water may be filtered during this time. An earlier change may, however, be necessary if the water flow is noticeably reduced. The water flow is now up to 20 liters / min depending on water pressure and filter housing.

Protect from frost.

 

Similar items

Water leakage protection mini 3/8 "connections
Mechanical leakage protection interrupts water supply to subsequent devices.Protect yourself from leaks and possible water damage. The Mini LCM water leakage safety device works mechanically with a compressed tissue tablet, which expands strongly in the presence of moisture, closing the integrated valve. The water supply of the following devices is interrupted.The valve is preferably mounted under the system to be secured and there glued or screwed to the ground. The insert (the tissue tablet) must be replaced after the LCM has been triggered by moisture. The inserts TB-2 are available in 2-packs. The Mini LCM is also available separately for use with reverse osmosis systems or other water filter housings.Connection: 1/4 "RO hoseSupplied accessories: adhesive strips and two wood screwsThe tissue tablet is already installed and the device is ready for use immediately upon delivery :-)

19,90 €*
Adapter DM 3/8 inch to 3/8 inch 90 degrees
The adapter facilitates the connection of AquaAvanti inline systems, especially when it is tight and leakage protection is to be used, since the hoses used are relatively stiff due to the design. Of course you can also use the adapter for other, suitable systems such as reverse osmosis systems.

6,90 €*
Design Stainless steel design faucet frosted
Stainless steel design faucet, ideal for the modern kitchen or a stylish bathroom.   The faucet can be stably mounted on thick marble countertops, etc., by means of its more than 8 cm long connecting pipe. The extra thick spout can easily be rotated 360 degrees. Outlet pipe with straightener and M22x1 thread and jet regulator. The Outlet pipe is secured by a barely visible union nut against coming out.   Technical specifications   Material: housing and spout made of stainless steel, uncoated Smooth, 360 ° swiveling tap Outlet pipe with jet regulator and M22x1 thread for water swirlers Durable, easily replaceable and low-wear ceramic inserts with stainless steel cage Height of worktop to center spout about 295 mm Height of worktop to water outlet about 200mm Discharge spout about 16cm Mounting on worktop, max. Plate thickness about 70 mm Weight: 600 gr, including packaging: 760 gr Dimensions Packaging: W / H / D 67x45x39 cm Connection 3/8 "AG, directly without adapter Bore diameter for worktop approx. 16.5 mm Connection: 3/8 "thread by enclosed adapter An adapter for reverse osmosis systems is available as an option. Please specify the tube thickness of the reverse osmosis system. The ceramic seal kit is easily replaceable and available as a spare part.

146,90 €*
Design Stainless steel three-way faucet
For cold, warm and filter water from under table systems. On the right side is the lever that allows you to switch between hot and cold water. The lever on the left controls the filtered water. The two water pipes for service water and filter water are separated inside and lead into the respective outlet for filter water (smaller) or service water (large). The faucet is characterized by integrated internal jet regulators and 360 ° rotatable outlet pipe. Technical specifications      Weight: 2.05 kg     Height from bottom to perlator: 280 mm     Outfeed of the outlet pipe: 260 mm     Diameter 44 mm     Connection: 3/8 "thread by enclosed adapter     Thread for service water outlet: M24     Threaded filter water outlet: M18 Scope of delivery: Connection hoses, table mounting disc with accessories  

359,00 €*
Shapely stainless steel tap "Organic"
Shapely, small and compact stainless steel faucet for under counter filter systems in the kitchen. High quality made of brushed stainless steel. The sealing cartridge is also made of stainless steel.   Technical specifications 360 ° swiveling plugged outlet pipe Easily replaceable and low-wear ceramic inserts with stainless steel cage Height of worktop to water outlet about 178 mm Discharge spout about 16cm Mounting on worktop: length of threaded rod approx. 68 mm Bore diameter for worktop approx. 11 mm Connection: 3/8 "thread by enclosed adapter Material: housing and spout made of stainless steel, uncoated An adapter for reverse osmosis systems is available as an option. Please specify the tube thickness of the reverse osmosis system.

69,90 €*
3/8 inches connection hose, AA inline filter system
white, pluggable, price per meter

1,99 €*