Digital & mobile conductivity meter

24,90 €*

Indhold: 1 Stück

Tilgængelig, leveringstid: 1-3 Tage

Stück
Varenummer: 1860
Hersteller: WatPass
EAN: 4260728210006
We supply the digital, mobile and elegant conductivity meter for hand-held measurements, with a measuring range of 0 - 1999 ppm, in blue colour. The measured values are easy to read on the digital display.
Produktinformation "Digital & mobile conductivity meter"

Digital, mobile and shapely conductivity meter for hand measurements (measuring range: 0 - 1999 ppm)

The digital, mobile and stylish conductivity meter for handheld measurements, with a measuring range of 0 - 1999 ppm.

If you want to know the conductance value in µS or mg/l, this can be easily converted. The following conversion key applies: 1.2 µS/cm = 1 ppm = 1 mg/l.

The measured values are easy to read on the digital display. The conductivity meter has two electrical conductivity probes that are resistant to salt deposits. It is particularly energy-saving, thanks to an automatic switch-off function that switches the device into power-save mode after 12 seconds.

What is conductivity?


It is the ability of a material to conduct electricity. The conductivity value is the total sum of the concentration of ions (anions and cations) in a solution that conduct electricity. It therefore provides information about the ionic strength of a solution, but not about the type of ions.

Areas of use and application of the conductivity meter

Conductivity is an important measurand for many areas, including drinking water and waste water, industrial manufacturing processes, aquarium water and also quality control in the food industry.

Examples of conductivity in aqueous media*
-Pure water: 0.055 μS/cm
-Distilled water: 0.5 μS/cm
-Mountain water: 1.0 μS/cm
-Rainwater: 50 μS/cm
-Drinking water: 300 - 800μS/cm
-Drinking water (max. conductance): 1055μS/cm
-Industrial wastewater: 5mS/cm
-sea water: 52 mS/cm

*(at 25°C)

Technische Details - Digital & mobile conductivity meter

Measuring range: 0 ~ 1999 μS / cm
Sensitivity: 1 μS / cm
Accuracy: ± 2% F.S.
Operating temperature: 10 ° C ~ 40 ° C
Batteries: 3V (CR2032 battery)
Dimensions: 135 x 25 x 23 mm (L x W x H)
Weight: 35 g

Similar items

Iron test - quick test for your well water
The iron rapid test is suitable for testing a defrosting system such as the AquaAvant IronGo or the AquaAvanti ManganGo, as well as other defrosting systems. The test we provide lasts for up to 100 tests. It does not replace well-founded water analysis from an accredited laboratory but is sufficiently well suited to check the function of a de-ironing plant.

44,90 €*
Well Plus Wateranalysis - pH value, water hardness, germs, iron, manganese, lead & other parameters
With the BRUNNENWASSER PLUS water test you can quickly and easily get an overview of the water quality of your fountain. The analysis includes the main pollutants in the water. The advantages of the water test     Simple sampling including instructions - no previous knowledge required     Water analysis in the accredited water laboratory DIN-EN-ISO 17025     Express analysis of your water sample (3-7 days), including expert tips     Analysis time only about 7 working days     Easy interpretation due to traffic light function of the analysis results also understandable for laypersons     If limits are exceeded, there are brief explanations of possible original causes The wide analysis spectrum of the Brunnenwasser Plus water test examines your water samples in addition to many important test values ??for microbiological parameters such as E.coli bacteria and enterococci. These can cause infections in immunodeficient people and therefore must not be contained in your drinking water. This water test tests your well water on a total of 19 test values, so that it can be safely used that goes beyond the irrigation of ornamental and useful plants. How is the well water PLUS analysis?After placing your order, we will send the water analysis set within 24 hours by Deutsche Post / DHL or UPS courier. The test set contains everything you need for sampling, such as sampling vessels, detailed instructions and of course a free return label. You do not need to have any previous knowledge. If you have any questions, the IVARIO drinking water experts and of course we from the water filter center team are available free of charge by phone and e-mail. Which pollutants are analyzed in the Brunnenwasser PLUS water test? The Brunnenwassertest PLUS includes the analysis of the following substances, according to the detection limits of the Drinking Water Ordinance (TrinkwVO): Indicator parameters coliform germs (intestinal germs) microbiological parameters drinking water regulationE. coliEnterococci Heavy metals     lead    silver    zinc Minerals and hardness agents     iron    magnesium    manganese    calcium    sulfate    chloride    beryllium    Water hardness (total hardness) nitrogenous compounds     ammonium    nitrite    nitrate further examination parameters     PH value    electric conductivity We wish you much success and a good test result!

89,90 €*
Total Hardness Test set for easy determination of German water hardness ° dH
Total Hardness Test set for easy determination of German water hardness ° dH. Accurate measurement with simple titration method. If the indicator solution drips in 5 ml of your test water until it changes color, the water hardness ° dH can be determined very simply and exactly. Applicable for checking the function of hardening plants or decalcifying plants. Naturally also for softening cartridges or all other areas of application for which you want to quickly and easily determine the water hardness down to one degree of accuracy. Prior knowledge by the user is not required. Have fun with determining your water hardness!

7,99 €*

Related items

Aqua Avanti Osmo EM with EM Ceramics (Reverse Osmosis for households)
AquaAvanti Osmo Reverse Osmosis Water Filter System designed and assembled in GermanyExcellent water for your well-being :-)We need about three liters of drinking water per person per day. Many households drink bottled water, because they do not like the taste of tap water. This is an expensive, inconvenient and ecologically questionable solution. However, almost every household has tap water, which is ideal as a raw material for further processing. The AquaAvanti Osmo Reverse Osmosis System will provide you with the daily amount of very clean and tasting water you need from your regular tap water network, saving you a lot of money and protecting the environment within a year.In addition, you will get your "Airbag in the kitchen" with the AquaAvanti Osmo RO System. No matter what harmful or dangerous substances come out of your water pipes, your AquaAvanti Osmo reduces almost all substances contained in the water over several filtration stages to a level where they are no longer bothersome and the water is absolutely harmless to drink.The process of reverse osmosis has been proven for decades and is even used to desalinate seawater. With its patented and hydraulically driven permeation pump, the AquaAvanti Osmo device saves a lot of water compared to conventional reverse osmosis units and at the same time consumes no electricity.Use for everyday enjoyment and ideal for:      Prepare food and drinks     For the production of unspoiled baby food     Relief of dialysis patients     To protect your high quality home appliances such as kettles, coffee makers, espresso machines, etc.     For skin and facial care     No visible water marks on cleaned surfaces like glass, mirrors etc. What characterizes the AA Osmo reverse osmosis system?      Production of the purest, highest quality, light (demineralized) and fresh drinking water through three filters, a membrane and the patented permeate pump     Daily production up to 85l (tank volume 12 liters)     Better and fresher taste of the water by incorporation of a special ceramic in the filter     Only high quality components, developed and assembled in Germany Filter tap water with Aqua Avanti OsmoIts tap water passes through the pre-filter stages and the hydraulic shut-off valve into the reverse osmosis module. The purified water penetrates the membrane.From the membrane, the purified water flows into the pumping chamber of the permeate pump. The system's waste water drives the pump, which delivers the purified water to the pressure tank. The permeate pump is a patented invention that improves the performance and efficiency of the plant. The pure water is ready for removal in the pressure tank.A hydraulic shut-off valve controls the water supply of the system. If you open the faucet of the system, the water flows through the post filter before you can enjoy it fresh. The system works without electricity only with the energy of the water pressure.Flow chart Aqua Avanti Osmo Tap water may have a maximum of 2000 microsiemens. This corresponds to 1280 mg / l of dissolved substances. Reverse Osmosis works like a very fine sieve. This "sieve" filters ions in the molecular range. It also makes the control of effectiveness so easy. Since even single atoms such as dissolved heavy metals or small ions such as sodium and nitrate are reduced, the pure water of the "Aqua Avanti Osmo" reverse osmosis system has a very low conductivity. The conductivity of the water is below 80 microsiemens when the "Aqua Avanti Osmo" produces water in high purity.Advantages of the patented permeate pump      Clean and pure water at home every time     Save money!      Your "airbag" for the kitchen     Never carry heavy water boxes     Development and installation of the device in Germany with competent support!     Version with sediment pre-filter and activated carbon pre-filter to protect the high-quality reverse osmosis membrane.     Activated carbon post-filter for best taste     No loss of efficiency compared to systems without permeate pump     Faster production of water     No electrical connection necessary     No power consumption     The hydraulic energy of the water is used to separate the wastewater (concentrate) and to transport the filter water (permeate) into the storage tank     ratio 1: 3 (permeate to concentrate); for cheap equipment up to 1:15     Made in Germany Membrane and filter     Easy change of filters (every 6-12 months) and the membrane (up to 36 months) with bayonet lock. There is no tool necessary!    Color coding of the filters and membranes prevents confusion during filter replacement.    red = pre-filter  yellow = activated carbon pre-filter  green = reverse osmosis module (membrane)  blue = activated carbon secondary filterInstallation    little need for space Environmental conditions       Inlet water temperature 2-36 ° degrees Celsius      The system should be operated with a pressure of at least 3 -6 bar. At less pressure, the filter performance decreases sharply, the quality suffers and you get hardly any water in the tank. If the line pressure is often below 3 bar, we recommend devices with booster pump. The very energy-saving pumps now have a good life and supply the reverse osmosis membrane with 7 bar pressure.Scope of delivery: Reverse osmosis system with membrane, filter cartridges, stainless steel tank and stainless steel design faucet - mounting accessoriesWeight: approx. 10.25kg incl. PackagingSize of the packaging: 48x18x32cm

999,00 €*
WatPass Reverse Osmosis plant EASY
The WatPass reverse osmosis system EASY is a noble, very compact osmosis system with which you can produce the purest water quality for your home in seconds. The water treatment system impresses with its small housing and at the same time very high-quality design. It is perfect for your household and impresses above all with its innovative, easy operation. The WatPass reverse osmosis system EASY produces at least 1.5 liters per minute of the purest filtered drinking water from your drinking water - free of impurities and smooth in taste. The filter water/waste water ratio of 1:1 makes it extremely economical, as this is an outstanding value in the field of reverse osmosis systems. Since the system is connected directly to the drinking water line (direct flow system), you can enjoy fresh, clear and pure water in no time at all. The risk of contamination from a connected tank is completely eliminated with our product, the WatPass reverse osmosis system EASY. WatPass reverse osmosis system with an innovative filter system in one unit The five stages of the filter system are combined in one functional unit. As a result, changing the filter at all filter levels is child's play and takes less than 30 seconds! High quality membrane through nanotechnology The heart of an osmosis system is the elaborate filter technology and here in particular the membrane that works on the principle of reverse osmosis. Tap water is pressed into the osmosis system by high line pressure, where it is only freed from all larger particles, sediments and pollutants through pre-filters (PP cotton layers and activated carbon). The water is then pressed through a membrane, the holes of which are extremely small and therefore allow almost no substances to pass through, apart from pure water. The retained substances in front of the membrane are flushed out as waste water. The membrane of the WatPass was constructed in a perfect way through nanotechnology. Five-stage filter system of the WatPass reverse osmosis system EASY 1. The first PP cotton layer filters out sediments, rust and suspended matter 2. Activated carbon filters chlorine, organic compounds, taste and smell 3. Second layer of PP cotton removes further mechanical critical particles 4. Reverse osmosis membrane of 0.0001 µm filters heavy metals and organic substances such as pesticide residues, drug residues and much more 5. Activated carbon post-filter for taste optimization Filter change EASY - and that in under 30 seconds! Conventional reverse osmosis systems do not always make changing the filter easy, because they usually contain several filter cartridges that can be more or less easily exchanged. The WatPass reverse osmosis system EASY impresses with its single cartridge system - the five-stage filter system is in one housing. Thanks to this innovative plug-in system, the filter change is done in a very short time and you don't even have to interrupt the water supply. The reason for this is that the water supply is automatically interrupted by the system when the filter cartridge is changed. Therefore you do not have to think about turning off the water supply yourself beforehand. Modern design in a compact size Thanks to the very small dimensions of the WatPass reverse osmosis system EASY, it can be easily installed almost anywhere. It can be easily installed without any special technical knowledge. The operating instructions with easy-to-understand illustrations - are clear, concise and describe every step that is required. The WatPass reverse osmosis system EASY is designed in elegant black and gray and you neither see a filter cartridge nor can it be seen that it could be an osmosis system. The magnetic front panel is also practical and looks chic. It's a shame that the system usually disappears under the sink. Use After the water treatment by the WatPass EASY, the water is so pure and clear that you can drink it naturally and it is also very suitable for the production of baby food. Relieving your body of harmful substances certainly makes sense, treat yourself and your health to something good. In the household, the filtered water is also ideal for ironing water and for cleaning glass surfaces. Limescale stains are history and you will never have problems with calcified kettles, faucets, windows or irons again.

589,00 €*