Priser inkl. momseksl. fragt
- Ordrenummer: 1805
- EAN 4356487191691
The UV water treatment system Pure 1.4 / 2.4 75W from the manufacturer UST is used to inactivate germs such as bacteria and viruses. It is manufactured entirely in Germany and consists of highly polished stainless steel, this also applies to the connections. The manufacturer therefore gives a 10-year guarantee on the reactor! In the case of connections and reactors made of plastic, the aggressive UV radiation releases plastic particles over time, the components dry out and break.
What is UV water treatment?
Pathogenic bacteria or viruses can be inactivated with UV or UVC radiation. This means that they are no longer harmful to health! The treatment at a wavelength of 254nm ensures fast, effective and safe disinfection. This process is economical and has been used worldwide for many years. UV radiation enables water from germs to be used safely without the use of chlorine. The process is absolutely harmless and of course the water tastes much better than what is treated with chlorine.
Due to the three existing connections, you can choose to install from one side or the other. The connection that is not required is closed. The sterilization capacity of 3100 l/h is achieved with a very low power consumption of 75 watts. Please note that the water to be treated must be at least 95% clear (* SSK <95%), so good pre-filtration is absolutely necessary! You can find solutions here in our shop, please contact us if necessary. Thank you!
Exchange of the UV lamp every 12 months or max 9000 hours. The lamp can be easily loosened by screws and then replaced by pulling it out.
Connections: Standard 2 "inch or alternatively 1" inch possible (if 1 "inch desired, please specify when ordering).
* SSK = spectral attenuation coefficient, i.e. that is, the water must be at least 95% transparent, otherwise pre-filtration is necessary
Electrical power: 75 W
Flow: 20 m³ / h max. up to 3.1 m³ / h with 400 J / m²
(Drinking water quality)
Temperature: 40 ° C max.
Operating pressure: 6 bar max.
Voltage: 85-264 VAC
Connection: R 2 "or R 1" (optional)
Length (reactor unit): 1050 mm