UV system PURE 1.2. 21 watts for the disinfection of water

799,00 €*

Indhold: 1 Stück

Tilgængelig, leveringstid: 5 Tage

Stück
Varenummer: 1800
Hersteller: UST
EAN: 4260728213656
Die UV Wasserbehandlungsanlage Pure 1.2, vom Hersteller UST, wird zur Inaktivierung von Keimen wie Bakterien und Viren eingesetzt. Sie kann bis zu 1080 Liter wasser pro Stunde behandeln. Gefertigt aus hochwertigem Edelstahl. Made in Germany. Geeignet für Gartenhäuser, Brunnen, Pools, Teiche, ...
Produktinformation "UV system PURE 1.2. 21 watts for the disinfection of water"

The UV water treatment system Pure 1.2 21W from the manufacturer UST is used to inactivate germs such as bacteria and viruses. It is manufactured entirely in Germany and consists of highly polished stainless steel, this also applies to the connections. The manufacturer therefore gives a 10-year guarantee on the reactor! In the case of connections and reactors made of plastic, the aggressive UV radiation releases plastic particles over time, the components dry out and break.

What is UV water treatment?
Pathogenic bacteria or viruses can be inactivated with UV or UVC radiation. This means that they are no longer harmful to health! The treatment at a wavelength of 254nm ensures fast, effective and safe disinfection. This process is economical and has been used worldwide for many years. UV radiation enables water from germs to be used safely without the use of chlorine. The process is absolutely harmless and of course the water tastes much better than what is treated with chlorine.

Technical information
Due to the three existing connections, you can choose to install from one side or the other. The connection that is not required is closed. The sterilization capacity of 1080 l/h is achieved with a extremely low power consumption of 21 watts. Please note that the water to be treated must be at least 95% clear (* SSK <95%), so good pre-filtration is absolutely necessary! You can find solutions here in our shop, please contact us if necessary. Thank you!

Maintenance
Exchange of the UV lamp every 12 months or max 9000 hours. The lamp can be easily loosened by screws and then replaced by pulling it out.

Connections: 1" inch

* SSK = spectral attenuation coefficient, i.e. that is, the water must be at least 95% transparent, otherwise pre-filtration is necessary

Technische Details - UV system PURE 1.2. 21 watts for the disinfection of water

Electrical power: 21 Watt
Flow: 42 l / min max., 18 l / min with 400 J / m²
(Drinking water quality)
Temperature: 40 ° C max.
Operating pressure: 6 bar max.
Voltage: 85-264 VAC
Water connection: R 1 " Zoll / inch
Length (reactor unit): 680 mm

Similar items

Single-stage house & well filter incl. Filter cartridge 10 Zoll
1-stage 10 Zoll house- and well water filtration for a residential unit with selectable filter The filter system is connected to the central water pipe at the entrance to the water meter. Filter housing and the filter head with vent valve are made of food grade and high strength plastic. We have consciously decided in the housings from Prime Inventions GmbH against cheap solutions from dubious origins. Data for a filter unit Overall height: approx. 343 mm to upper edge of venting valve Diameter of the housing head: 185 mm without connection nipple, with connection nipples approx. 225 mm Curb weight: 2.4 kg Dimensions: total height to upper edge vent valve: 343 mm Each individual housing is included as standard in the scope of delivery: wall bracket painted white with 4 stainless steel housing screws, 2 pieces 1 "plastic housing nipples. One housing key and 2 pieces each of 1 Zoll stopcocks are included in each complete filter system. General information about the Aqua Fidelo water filtration systems Aqua Fidelo is a water filtration system for individual houses, multiple residential units and industrial applications. It can be filtered city water and well water. When filtering well water, we recommend a prior water analysis in order to be able to optimally adapt the system. The system is available in the expansion of one to four housing units. This allows you to install Aqua Fidelo exactly to the required filter performance on site. Water output per minute Depending on the required amount of water, Aqua Fidelo is available in 10 Zoll (one accommodation unit) or 20 Zoll case (two accommodation units). The water performance of the sediment and activated carbon filters in the Aqua Fidelo 10 is around 20-25 l/min. And in the Aqua Fidelo 20” around 40-50 l/min., depending on the water line pressure. In the systems with iron filter cartridge, the water flow bottleneck is the iron filter cartridge. The 10” iron filter cartridges have a water capacity of approx. 9 l/min. The 20” iron filters have the double flow rate of 18 l / min. The limescale protection cartridges 10” and 20” have a water flow of 24 or 48 liters per minute Safety instructions: Only suitable for cold water operation. Installation must be carried out by a sanitary facility specialist! For safety reasons, we recommend a drain in the vicinity of the filter system. The installation is only with a pressure reducer, adjusted to max. 4.5 bar, and a backflow preventer allowed.   Information about the selectable filter cartridges Sediment filter standard Standard sediment filter 10 my fineness, made of polypropylene foam. Ideal for removing the following mechanical impurities from the water: sand, mud, rust, river mud, pollen… Service life: The filter cartridge must be replaced after 6 months (according to DIN 1988). Basically, 16.000 (10 ") or 26.000 (20") liters of water may be filtered within the 6 months. Technical data: Flow rate: 50 liters (10 ") or 60 liters (20") per minute (depending on the water pressure) Use only with cold water, protect against frost Sediment filter Premium (Pentek) Pentek ™ 2-stage sediment filter (outside 25 my, inside 1 my). In the outer layer, which is about 5 cm thick, all substances are held larger than 25 my, in the inner layer is an additional about 5 cm thick filter fleece with the filter density 1 my. As a result, the filter cannot clog so quickly compared to conventional sediment filters. Service life: The filter cartridge must be replaced after 6 months (according to DIN 1988). Technical data: Flow: 40 liters (10 ") or 60 liters (20") per minute (depending on the water pressure), Use only with cold water, protect against frost Carbon filter standard Standard activated carbon filter 10 my fineness. Filter performance: Odors and bad taste in the water, retention of small particles, retention of chlorine and other similar undesirable substances, retention of various heavy metals such as lead, etc., retention of organic compounds Service life: The filter cartridge must be replaced after 6 months (according to DIN 1988). Basically, 16,000 (10 ") or 26,000 (20") liters of water may be filtered within the 6 months. Technical data: Flow rate: 30 liters (10 ") or 40 liters (20") per minute (depending on the water pressure). Use only with cold water, protect against frost Carbonfilter Premium (Pentek) With this filter cartridge, it is possible to filter very large amounts of water at the house water inlet very fine. The fineness of 0.5µm is extremely small for this type of construction (otherwise in the domestic water inlet usually 5µm or 10µm). This makes it possible not only to remove odors from the water, but also to reduce some pollutants in the water. These include e.g.: heavy metals, pesticides and drug residues. Despite the high fineness of the filter cartridge, the water pressure only decreases by approx. 0,5 bar. Service life: The filter cartridge must be ready after 6 months (according to DIN 1988). Technical data: Flow: 20 liters (10 ") or 30 liters (20") per minute (depending on water pressure). Use only with cold water, protect from frost. Iron filter Effective reduction of dissolved iron in the water. Service life: The filter cartridge must be replaced after 6 months (according to DIN 1988). Technical data: Flow: approx. 9 liters (10 ") or 18 liters (20") per minute. Use only with cold water , protect against frost. Anti limescale cartridge The catalyst granule flows through the seed crystal principle. This precipitate lime is bound to the seed crystals and floats in the water with away. The procedure serves to protect the line and devices. Limescale deposits can be easily removed / wiped off after use. Lime removal, however, does not take place. Duration of use: When used with drinking water quality water without coarse sediments, the catalyst granulate lasts about 3 years. Technical data: Flow: 24 liters (10 ") or 48 liters (20") per minute (depending on the water pressure). Use only with cold water, protect against frost.

Varianter fra 199,00 €*
0,00 €*
Single-stage house & well filter incl. Filter cartridge 20 Zoll
1-stage 20 "house and well water filtration with selectable filter The filter system is connected to the central water pipe at the entrance to the water meter.Filter housing and the filter head with vent valve are made of food-safe and high-strength plastic and are of extremely high quality. We have consciously decided in the housings from Prime Inventions GmbH against cheap solutions from dubious origins.Data for a filter unit:Total height: approx. 615 mm to the top of the ventilation valveDiameter of the housing head: 185 mm without connection nipple, with connection nipples approx. 225 mmCurb weight: 3.4 kgDimensions: total height to upper edge of vent valve: 343 mmEach individual housing is included as standard in the scope of delivery: wall bracket painted white with 4 stainless steel housing screws, 2 pieces 1 "plastic housing nipples.One housing key and 2 each of 1 "stopcocks are included in each complete filter system. General information about the Aqua Fidelo water filtration systems Aqua Fidelo is a water filtration system for individual houses, multiple residential units and industrial applications. It can be filtered city water and well water. When filtering well water, we recommend a prior water analysis in order to be able to optimally adapt the system. The system is available in the expansion of one to four housing units. This allows you to install Aqua Fidelo exactly to the required filter performance on site. Water output per minute Depending on the required amount of water, Aqua Fidelo is available in 10 Zoll (one accommodation unit) or 20 Zoll case (two accommodation units). The water performance of the sediment and activated carbon filters in the Aqua Fidelo 10 is around 20-25 l/min. And in the Aqua Fidelo 20” around 40-50 l/min., depending on the water line pressure. In the systems with iron filter cartridge, the water flow bottleneck is the iron filter cartridge. The 10” iron filter cartridges have a water capacity of approx. 9 l/min. The 20” iron filters have the double flow rate of 18 l / min. The limescale protection cartridges 10” and 20” have a water flow of 24 or 48 liters per minute Safety instructions: Only suitable for cold water operation. Installation must be carried out by a sanitary facility specialist! For safety reasons, we recommend a drain in the vicinity of the filter system. The installation is only with a pressure reducer, adjusted to max. 4.5 bar, and a backflow preventer allowed.   Information about the selectable filter cartridges Sediment filter standard Standard sediment filter 10 my fineness, made of polypropylene foam. Ideal for removing the following mechanical impurities from the water: sand, mud, rust, river mud, pollen… Service life: The filter cartridge must be replaced after 6 months (according to DIN 1988). Basically, 16.000 (10 ") or 26.000 (20") liters of water may be filtered within the 6 months. Technical data: Flow rate: 50 liters (10 ") or 60 liters (20") per minute (depending on the water pressure) Use only with cold water, protect against frost Sediment filter Premium (Pentek) Pentek ™ 2-stage sediment filter (outside 25 my, inside 1 my). In the outer layer, which is about 5 cm thick, all substances are held larger than 25 my, in the inner layer is an additional about 5 cm thick filter fleece with the filter density 1 my. As a result, the filter cannot clog so quickly compared to conventional sediment filters. Service life: The filter cartridge must be replaced after 6 months (according to DIN 1988). Technical data: Flow: 40 liters (10 ") or 60 liters (20") per minute (depending on the water pressure), Use only with cold water, protect against frost Carbon filter standard Standard activated carbon filter 10 my fineness. Filter performance: Odors and bad taste in the water, retention of small particles, retention of chlorine and other similar undesirable substances, retention of various heavy metals such as lead, etc., retention of organic compounds Service life: The filter cartridge must be replaced after 6 months (according to DIN 1988). Basically, 16,000 (10 ") or 26,000 (20") liters of water may be filtered within the 6 months. Technical data: Flow rate: 30 liters (10 ") or 40 liters (20") per minute (depending on the water pressure). Use only with cold water, protect against frost Carbonfilter Premium (Pentek) With this filter cartridge, it is possible to filter very large amounts of water at the house water inlet very fine. The fineness of 0.5µm is extremely small for this type of construction (otherwise in the domestic water inlet usually 5µm or 10µm). This makes it possible not only to remove odors from the water, but also to reduce some pollutants in the water. These include e.g.: heavy metals, pesticides and drug residues. Despite the high fineness of the filter cartridge, the water pressure only decreases by approx. 0,5 bar. Service life: The filter cartridge must be ready after 6 months (according to DIN 1988). Technical data: Flow: 20 liters (10 ") or 30 liters (20") per minute (depending on water pressure). Use only with cold water, protect from frost. Iron filter Effective reduction of dissolved iron in the water. Service life: The filter cartridge must be replaced after 6 months (according to DIN 1988). Technical data: Flow: approx. 9 liters (10 ") or 18 liters (20") per minute. Use only with cold water , protect against frost. Anti limescale cartridge The catalyst granule flows through the seed crystal principle. This precipitate lime is bound to the seed crystals and floats in the water with away. The procedure serves to protect the line and devices. Limescale deposits can be easily removed / wiped off after use. Lime removal, however, does not take place. Duration of use: When used with drinking water quality water without coarse sediments, the catalyst granulate lasts about 3 years. Technical data: Flow: 24 liters (10 ") or 48 liters (20") per minute (depending on the water pressure). Use only with cold water, protect against frost.

Varianter fra 229,00 €*
0,00 €*
UV-C replacement lamps for the UST UV water disinfection system UV-C 21 Watt
Power watt: UV-C 21 Watt
The UV-C water treatment systems of the Pure series, like all UV systems, require a regular change of the lamps in order to guarantee the disinfection performance during operation. Change intervals     UV-C 21 watts: approx. 8000 hours     UV-C 40 watts: approx. 8000 hours     UV-C 50 watt: approx. 8000 hours     UV-C 75 watt: approx. 8000 hours     UV-C amalgam 120 watts: approx. 10,000 hours What is UV water treatment? Pathogenic bacteria or viruses can be inactivated with UV or UVC radiation. This means that they are no longer harmful to health! Treatment at a wavelength of 254 nm ensures fast, effective and safe disinfection. This process is economical and has been used worldwide for many years. With UV irradiation, germs can be safely used in water without the use of chlorine. The process is absolutely harmless and of course the water tastes much better than what has been treated with chlorine. Maintenance Replacement of the UV lamps approximately every 12 months The lamps can be easily loosened with screws and then pulled out for replacement.

Varianter fra 60,50 €*
86,00 €*
Pentek Big Blue bag filter housing incl. accessories
PENTEK BIG BLUE BAG FILTER HOUSINGS The PBH Big Blue bag filter housings, are available in 10" and 20" inch lengths. They are excellent when long service life is required for sediment filtration. The large volume of the filter bags guarantees a very large capacity . Therefore, these filter housings are very suitable for all operators of water treatment plants. These filter housings are ideal for low flow applications such as well pre-filtration, food processing, commercial and industrial applications. The Big Blue housings have been tested and certified to NSF® (International NSF/ANSI Standard) for suitable materials and structural integrity requirements, making them excellent for industrial uses or drinking water filtration. The O-rings are manufactured from BUNA-N. The strong, lightweight and corrosion resistant filter housings are made of polypropylene and are easy to install. Of course, we can also supply you with the matching bag filters in many different µm thicknesses as packaging units. As inlet or outlet the housings are available in the connection sizes 1" with NPT thread, or 11/2 inch with BSP thread. Please select the appropriate variant for your order via the selection menu and note the thread type. Why bag filters? Well water also contains sediments such as sand, oxides, clay and loam particles.  If downstream treatment systems (e.g. iron and manganese filters) or garden irrigation systems are to be operated, pre-filtration of sediments is necessary.  Sediment filters thus reduce the amount of sediment carried along by the pump with the pumped water and ensure, among other things, that the mechanisms of such devices as Oxydizer classic or pH Neutralizer are not prematurely contaminated or blocked. Equipment The Pentair PBH is supplied with pressure gauge and drain cock.  A mounting bracket (including screws), two double pipe nipples and a housing opening wrench are also supplied. The pressure gauge is used to measure the outlet pressure. When this drops, the filter is full. This allows you to check at a glance whether the bag needs to be cleaned. With the drain cock on the housing, you can simply drain the water before cleaning or changing the filter, which makes cleaning much easier afterwards. Note: The NPT threads are slightly different in diameter, number of turns (pitch in turns per inch) and taper angle compared to the Whitworth threads also called British Standard Pipe (BSP), which are common in Germany, so that both threads cannot be screwed together.    

Varianter fra 279,00 €*
298,00 €*
Pentek Big Blue bag filter housing incl. accessories 10inch / 1 inch NPT Thread
Housing / Connection: 10inch / 1 inch NPT Thread
PENTEK BIG BLUE BAG FILTER HOUSINGS The PBH Big Blue bag filter housings, are available in 10" and 20" inch lengths. They are excellent when long service life is required for sediment filtration. The large volume of the filter bags guarantees a very large capacity . Therefore, these filter housings are very suitable for all operators of water treatment plants. These filter housings are ideal for low flow applications such as well pre-filtration, food processing, commercial and industrial applications. The Big Blue housings have been tested and certified to NSF® (International NSF/ANSI Standard) for suitable materials and structural integrity requirements, making them excellent for industrial uses or drinking water filtration. The O-rings are manufactured from BUNA-N. The strong, lightweight and corrosion resistant filter housings are made of polypropylene and are easy to install. Of course, we can also supply you with the matching bag filters in many different µm thicknesses as packaging units. As inlet or outlet the housings are available in the connection sizes 1" with NPT thread, or 11/2 inch with BSP thread. Please select the appropriate variant for your order via the selection menu and note the thread type. Why bag filters? Well water also contains sediments such as sand, oxides, clay and loam particles.  If downstream treatment systems (e.g. iron and manganese filters) or garden irrigation systems are to be operated, pre-filtration of sediments is necessary.  Sediment filters thus reduce the amount of sediment carried along by the pump with the pumped water and ensure, among other things, that the mechanisms of such devices as Oxydizer classic or pH Neutralizer are not prematurely contaminated or blocked. Equipment The Pentair PBH is supplied with pressure gauge and drain cock.  A stainless steel mounting bracket (including screws), two double pipe nipples and a housing opening wrench are also supplied. The pressure gauge is used to measure the outlet pressure. When this drops, the filter is full. This allows you to check at a glance whether the bag needs to be cleaned. With the drain cock on the housing, you can simply drain the water before cleaning or changing the filter, which makes cleaning much easier afterwards. Note: The NPT threads are slightly different in diameter, number of turns (pitch in turns per inch) and taper angle compared to the Whitworth threads also called British Standard Pipe (BSP), which are common in Germany, so that both threads cannot be screwed together.    

279,00 €*
Pentek Big Blue bag filter housing incl. accessories 10 inch / 1 1/2 inch BSP Thread
Housing / Connection: 10 inch / 1 1/2 inch BSP Thread
PENTEK BIG BLUE BAG FILTER HOUSINGS The PBH Big Blue bag filter housings, are available in 10" and 20" inch lengths. They are excellent when long service life is required for sediment filtration. The large volume of the filter bags guarantees a very large capacity . Therefore, these filter housings are very suitable for all operators of water treatment plants. These filter housings are ideal for low flow applications such as well pre-filtration, food processing, commercial and industrial applications. The Big Blue housings have been tested and certified to NSF® (International NSF/ANSI Standard) for suitable materials and structural integrity requirements, making them excellent for industrial uses or drinking water filtration. The O-rings are manufactured from BUNA-N. The strong, lightweight and corrosion resistant filter housings are made of polypropylene and are easy to install. Of course, we can also supply you with the matching bag filters in many different µm thicknesses as packaging units. As inlet or outlet the housings are available in the connection sizes 1" with NPT thread, or 11/2 inch with BSP thread. Please select the appropriate variant for your order via the selection menu and note the thread type. Why bag filters? Well water also contains sediments such as sand, oxides, clay and loam particles.  If downstream treatment systems (e.g. iron and manganese filters) or garden irrigation systems are to be operated, pre-filtration of sediments is necessary.  Sediment filters thus reduce the amount of sediment carried along by the pump with the pumped water and ensure, among other things, that the mechanisms of such devices as Oxydizer classic or pH Neutralizer are not prematurely contaminated or blocked. Equipment The Pentair PBH is supplied with pressure gauge and drain cock.  A stainless steel mounting bracket (including screws), two double pipe nipples and a housing opening wrench are also supplied. The pressure gauge is used to measure the outlet pressure. When this drops, the filter is full. This allows you to check at a glance whether the bag needs to be cleaned. With the drain cock on the housing, you can simply drain the water before cleaning or changing the filter, which makes cleaning much easier afterwards. Note: The NPT threads are slightly different in diameter, number of turns (pitch in turns per inch) and taper angle compared to the Whitworth threads also called British Standard Pipe (BSP), which are common in Germany, so that both threads cannot be screwed together.    

Varianter fra 279,00 €*
289,00 €*
Pentek Big Blue bag filter housing incl. accessories 20 inch/1 inch NPT Thread
Housing / Connection: 20 inch/1 inch NPT Thread
PENTEK BIG BLUE BAG FILTER HOUSINGS The PBH Big Blue bag filter housings, are available in 10" and 20" inch lengths. They are excellent when long service life is required for sediment filtration. The large volume of the filter bags guarantees a very large capacity . Therefore, these filter housings are very suitable for all operators of water treatment plants. These filter housings are ideal for low flow applications such as well pre-filtration, food processing, commercial and industrial applications. The Big Blue housings have been tested and certified to NSF® (International NSF/ANSI Standard) for suitable materials and structural integrity requirements, making them excellent for industrial uses or drinking water filtration. The O-rings are manufactured from BUNA-N. The strong, lightweight and corrosion resistant filter housings are made of polypropylene and are easy to install. Of course, we can also supply you with the matching bag filters in many different µm thicknesses as packaging units. As inlet or outlet the housings are available in the connection sizes 1" with NPT thread, or 11/2 inch with BSP thread. Please select the appropriate variant for your order via the selection menu and note the thread type. Why bag filters? Well water also contains sediments such as sand, oxides, clay and loam particles.  If downstream treatment systems (e.g. iron and manganese filters) or garden irrigation systems are to be operated, pre-filtration of sediments is necessary.  Sediment filters thus reduce the amount of sediment carried along by the pump with the pumped water and ensure, among other things, that the mechanisms of such devices as Oxydizer classic or pH Neutralizer are not prematurely contaminated or blocked. Equipment The Pentair PBH is supplied with pressure gauge and drain cock.  A stainless steel mounting bracket (including screws), two double pipe nipples and a housing opening wrench are also supplied. The pressure gauge is used to measure the outlet pressure. When this drops, the filter is full. This allows you to check at a glance whether the bag needs to be cleaned. With the drain cock on the housing, you can simply drain the water before cleaning or changing the filter, which makes cleaning much easier afterwards. Note: The NPT threads are slightly different in diameter, number of turns (pitch in turns per inch) and taper angle compared to the Whitworth threads also called British Standard Pipe (BSP), which are common in Germany, so that both threads cannot be screwed together.    

Varianter fra 279,00 €*
305,00 €*
Pentek Big Blue bag filter housing incl. accessories 20 inch/1 1/2 inch BSP Thread
Housing / Connection: 20 inch/1 1/2 inch BSP Thread
PENTEK BIG BLUE BAG FILTER HOUSINGS The PBH Big Blue bag filter housings, are available in 10" and 20" inch lengths. They are excellent when long service life is required for sediment filtration. The large volume of the filter bags guarantees a very large capacity . Therefore, these filter housings are very suitable for all operators of water treatment plants. These filter housings are ideal for low flow applications such as well pre-filtration, food processing, commercial and industrial applications. The Big Blue housings have been tested and certified to NSF® (International NSF/ANSI Standard) for suitable materials and structural integrity requirements, making them excellent for industrial uses or drinking water filtration. The O-rings are manufactured from BUNA-N. The strong, lightweight and corrosion resistant filter housings are made of polypropylene and are easy to install. Of course, we can also supply you with the matching bag filters in many different µm thicknesses as packaging units. As inlet or outlet the housings are available in the connection sizes 1" with NPT thread, or 11/2 inch with BSP thread. Please select the appropriate variant for your order via the selection menu and note the thread type. Why bag filters? Well water also contains sediments such as sand, oxides, clay and loam particles.  If downstream treatment systems (e.g. iron and manganese filters) or garden irrigation systems are to be operated, pre-filtration of sediments is necessary.  Sediment filters thus reduce the amount of sediment carried along by the pump with the pumped water and ensure, among other things, that the mechanisms of such devices as Oxydizer classic or pH Neutralizer are not prematurely contaminated or blocked. Equipment The Pentair PBH is supplied with pressure gauge and drain cock.  A stainless steel mounting bracket (including screws), two double pipe nipples and a housing opening wrench are also supplied. The pressure gauge is used to measure the outlet pressure. When this drops, the filter is full. This allows you to check at a glance whether the bag needs to be cleaned. With the drain cock on the housing, you can simply drain the water before cleaning or changing the filter, which makes cleaning much easier afterwards. Note: The NPT threads are slightly different in diameter, number of turns (pitch in turns per inch) and taper angle compared to the Whitworth threads also called British Standard Pipe (BSP), which are common in Germany, so that both threads cannot be screwed together.    

Varianter fra 279,00 €*
309,00 €*