WatPass® IronGo iron removal plant with catalyst granulate

Fra 7.971,85 kr. *
Indhold: 1 Stück

Priser inkl. momseksl. fragt

Brunnenpumpenleistung:

  • Ironing system Watpass® IronGo -for various selectable well pump services. The Watpass IronGo is a fully automatic deferrisation system, which is used when the iron values are higher than 0.2 mg / l.

    • 1477-001
    • 4250188802095
    The WatPass IronGo iron removal system oxidizes dissolved iron from your water. NEW - Control... mere
    Produktinformation "WatPass® IronGo iron removal plant with catalyst granulate"

    The WatPass IronGo iron removal system oxidizes dissolved iron from your water.

    NEW - Control head Clack with German menu and colour display. The colour modes of the display make it easier to check the operating conditions (blue = everything is fine). If there is an error (red = malfunction), you can see this at a glance. The German menu makes setting up the system much easier.

    Nothing has to be changed or refilled. The IronGo is therefore almost maintenance-free. Its performance is outstanding, it can filter up to 5 mg/l iron from the water. The installation is very simple. Even during backwashing, water can easily be removed. At a freely programmable time (approximately every 7 days), the concentrate is automatically disposed of through an outlet. A 3 m long drain hose is supplied and can be replaced by a longer garden hose if necessary.

    An additionally available mounting block (accessory) serves to bridge the gap, but is not absolutely necessary for operation, although it is highly recommended. This helps to maintain the water supply with untreated water during maintenance work.

    The system consists of:
    GFK pressure bottle in different sizes (adapted to the performance), which is filled with high-quality filter material. The catalyst granulate is coated with manganese dioxide (MnO2). Flow-controlled central control valve type Clack WS 1 CI.

    Functionality of the Katylasor granulate

    Iron is usually present as bicarbonate in groundwater.  Due to the excess carbonic acid, iron is not filterable. As a catalyst, the filter material causes the transition from soluble Fe2+ to insoluble Fe3+, the resulting oxidation product iron hydroxide is easily filterable. In order to filter iron successfully, a pH value of at least 6.8 (better 7.0) is required, independent of the filter material used. If the pH value of your water is too low, please contact us specifically. This must then be raised by further filter technology in the first step. We then recommend the WatPass pHGO system.

    Necessary installation conditions: Water connection Socket 230 V / 50 Hz, waste water connection, pressure reducer at > 6 bar

    Product details:

    - Flexible space-saving design
    - Corrosion-resistant GFK pressure cylinder
    - High-quality filter material
    - Computer-controlled valve Clack WS 1 CI
    - quantity control
    - Extremely low maintenance
    - Treatment of ferrous water
    - Reduction of the orange-brown shade in the water

    Areas of application: Well water, garden irrigation, laundries, industrial water use, Koi and fish ponds and all areas where too high an iron content in the water causes problems.

    WatPass IronGo is available in different versions depending on the capacity required or the quantity of well water to be treated (the colour of the pressure bottle may vary in some versions). These can be found in the selection menu.

    Installation service by specialized company: For the area of Central Germany we can arrange a specialized company, where you usually get an appointment within 2-4 weeks. The costs amount to approx. 400.00€ for normal installation situations. The executing company will clarify this with you in advance. We do not get any commission for the mediation! Please simply contact us if this service is interesting for you.

    In the scope of supply contained (execution depending upon plant size):

    Connection set 1 inch:

    2x armoured hose 1 inch ÜM x 1 inch ÜM, L=1.000 mm; 1x drain hose, L= 2.000mm;
    1x hose clamp 1/2 inch; 4x seals; 1x overflow hose, L= 2.000mm


    Connection set 1 1/4 inch:

    2x armoured hose 1 1/4 inch ÜM x 1 1/4 inch ÜM, L=1.000 mm; 1x drain hose,
    L= 2.000mm; 1x hose clamp 1/2 inch; 1x overflow hose; L=2.000mm; 4x seals


    Optional and additional:

    Mounting block 1 inch IG x 1 inch AG

    with blending, bypass function, sampling tap

    Note: If the IronGo filter systems are to be used in drinking water applications, they must comply with the "Rules for Drinking Water Installations" according to DIN 1988 -200 in conjunction with DIN EN 1717:2011-08. Then it is necessary to install a pipe isolator to protect the public drinking water network.

    Transport and costs: The article is delivered by a forwarding agent to avoid transport damage. Use our express service for a surcharge of 30.00€ (the forwarding agent will then deliver in two to three days).

     

     

    Relaterede links til "WatPass® IronGo iron removal plant with catalyst granulate"
    Technical details "WatPass® IronGo iron removal plant with catalyst granulate"
  • Serie_WatPass_IronGo_Datenblatt
  • Læse, skrive og diskutere anmeldelser... mere
    Anmeldelser for "WatPass® IronGo iron removal plant with catalyst granulate"
    Skriv en anmeldelse
    Anmeldelser vil blive synlig efter verifikation.
    Angiv venligst disse tegn i tekstfeltet.

    Felterne markeret med * er påkrævet.

    Jeg har læst og accepterer privatlivspolitikken.

    Set