WatPass® ManganeseGo manganese removal and iron removal in one

1.099,00 €*

Indhold: 1 Stück

Tilgængelig, leveringstid: 7 Tage

Brunnenpumpenleistung
Stück
Varenummer: 1559-001
Hersteller: WatPass
EAN: 4250188802361

Die WatPass®  ManganGo entfernt Mangan und Eisen aus Ihrem Brunnenwasser und verringert somit den orange-braunen Farbton des Wassers. Weiter reduziert sie oft vorkommenden, unangenehmen Schwefelwasserstoff und Trübungen des Wassers. Steuerkopf mit deutschem Menü.

Produktinformation "WatPass® ManganeseGo manganese removal and iron removal in one"

The WatPass ManganGo removes manganese and iron from your well water and thus reduces the orange-brown color of the water. It also reduces often occurring, unpleasant hydrogen sulfide and turbidity of the water.

The system is almost maintenance free. It only needs to be refilled every 3-4 months of potassium permanganate to regenerate the catalyst granules in the additional container. Its performance* is outstanding, it can filter up to 4.8 mg / l of iron and up to 2 mg / l of manganese from the water. The installation is very easy. At free programmable time (about every 7 days), the concentrate is automatically disposed of through a spout.

The system consists of a GRP pressure bottle filled with high-quality catalyst granules and a potassium permanganate reservoir (KMnO4), which is needed to regenerate the filter material. A quantity-controlled central control valve, type Clack WS 1 CI, currently represents the ultimate in the field of control valves for such systems. An additionally obtainable assembly block (bypass) serves to bridge, but is not absolutely necessary for operation, but it is recommended.

Function of the special filter material

The plant can filter iron, manganese and hydrogen sulfide from your well water in one go. The filter material is coated with manganese dioxide and acts as a catalyst. The manganese and iron present are oxidized by the catalyst granules and can be filtered in the then present form. The substances held in the filter bed are then removed from the device during the backwashing process. The filter granulate is supplied for technical reasons in the non-regenerated form. Therefore, it must be activated with a potassium permanganate solution during commissioning.

The WatPass ManganGo is specially equipped for us with a second granulate, which also ensures that any remaining turbidity from your well water to remove. This is rarely found in the form.

In order to be able to successfully filter manganese and iron, this is possible with the AA ManganGo even at a pH of at least 6.8. So in most cases, you do not have to install an additional pH enhancement device such as the WatPass phGo.


Areas of application: Well water, garden irrigation, laundries, industrial water use, Koi and fish ponds and all areas where a high manganese and iron content in the water causes problems

Depending on the desired performance, or the quantity of well water to be treated, the WatPass ManganGo is available in various versions. These can be found in the selection menu.


Depending on the spatial conditions and equipment requirements, we recommend that you consider the purchase of the following accessories:


Connection set 1 inch depending on system size

2x armored hose 1 inch ÜM x 1 inch ÜM, L = 1.000 mm; 1x drain hose, L = 2,000mm;
1x hose clamp 1/2 inch; 4x seals; 1x overflow hose, L = 2.000mm


Connection set 1 1/4 inch depending on system size

2x armored hose 1 1/4 inch ÜM x 1 1/4 inch ÜM, L = 1.000 mm; 1x drain hose,
L = 2,000mm; 1x hose clamp 1/2 inch; 1x overflow hose; L = 2.000mm; 4x seals

Mounting block 1 inch IG x 1 inch AG

with intersection, bypass function, sampling tap


Installation instructions for connection to public networks: If the ManganGo filter systems are to be used in the drinking water sector, they must comply with the "Rules for drinking water installations" according to DIN 1988 -200 in conjunction with DIN EN 1717: 2011-08. Then it is necessary to install a backflow preventer to protect the public drinking water network. Necessary installation conditions: Water connection socket 230 V / 50 Hz, waste water connection, pressure reducer at> 6 bar

Transport: The article is delivered to avoid transport damage by freight carrier.

* The indicated filter capacities are max. achievable values ??under exactly analyzed conditions. A water analysis and determination of what the water should be used for is a basic requirement for good advice and the selection of the right filter system. Well water can be subject to variations in composition due to various environmental factors. Therefore, a regular analysis should take place to be able to adapt the filter devices by, for. B. the regeneration cycle is changed.

Technische Details - WatPass® ManganeseGo manganese removal and iron removal in one

Note: The item is shipped by freight carrier to avoid shipping damage.

Downloads - WatPass® ManganeseGo manganese removal and iron removal in one

Similar items

WatPass® pHGo for raising the pH value of your well water
If, as a well operator, you have low pH levels in your water and you want to use it as drinking water, the WatPass® pHGo offers you an excellent opportunity to increase the ph value in order to comply with the regulations of the Drinking Water Ordinance (pH 6.5-9, 5, TrinkwVo 2001/11). The system consists of a GRP pressure bottle, which is filled with a material for pH increase. A volume-controlled central control valve, type Clack WS 1 CI, currently represents the ultimate in control valves for such systems. Background Acidic water is corrosive. As the pH drops, the proportion of free carbonic acid increases, attacking all metals except stainless steel. This leads to leaks in the water installation over time. It also pollutes your drinking water with copper, zinc or aluminum. The WatPass pHGo contains a mineral that neutralizes the excess carbonic acid and immediately increases the pH value. The mineral is a consumable and must be refilled 1-3 times a year, depending on local conditions. Installation Behind the well pump or in front of the pressure vessel, if available. To ensure proper backwash, a pressure control must be installed in front of the neutralizer or a bypass of the existing pressure switch to allow the well pump to start delivering water when the neutralizer backwash valve is opened. Recommendation: To maintain the performance and service life of the device, a sediment filter should be installed. If the iron and manganese contents of your well water are too high and you want to use the WatPass IronGo, but the pH value is too low for the proper functioning of the device, then the WatPass phGo is the solution for this case! The WatPass phGo raises the pH of your well water to a level that allows the WatPass IronGo to be used for iron removal, even if the pH of your water is below 6.8. The installation is serial, before the WatPass IronGo and is very simple. Depending on the desired performance or the amount of well water to be treated, the WatPass phGo is also available in other versions. If the model offered by us does not fit, of course we can also sell you another, suitable device. Just ask us! Applications Well water, garden irrigation, laundries, hot water, koi and fish ponds and all areas where too low ph value of your water prevents iron ironing with the IronGo. Depending on the spatial conditions and equipment requirements, we recommend that you consider the purchase of the following accessories: Connection set 1 inch depending on system size 2x armored hose 1 inch ÜM x 1 inch ÜM, L = 1.000 mm; 1x drain hose, L = 2,000mm; 1x hose clamp 1/2 inch; 4x seals; 1x overflow hose, L = 2.000mm Connection set 1 1/4 inch depending on system size 2x armored hose 1 1/4 inch ÜM x 1 1/4 inch ÜM, L = 1.000 mm; 1x drain hose, L = 2,000mm; 1x hose clamp 1/2 inch; 1x overflow hose; L = 2.000mm; 4x seals Mounting block 1 inch IG x 1 inch AG with intersection, bypass function, sampling tap   Note: A water analysis and determination of what the water should be used for is a prerequisite for good advice and the selection of the right filter system. Well water may be subject to variations in composition due to various environmental influences. Therefore, a regular analysis should take place to be able to adapt the filter devices by For example, the regeneration cycle is changed. Installation instructions for connection to public networks: If the WP ManganGo filter systems are to be used in the drinking water sector, they must comply with the "Rules for drinking water installations" according to DIN 1988 -200 in conjunction with DIN EN 1717: 2011-08. Then it is necessary to install a backflow preventer to protect the public drinking water network. Necessary installation conditions: Water connection socket 230 V / 50 Hz, waste water connection, pressure reducer at> 6 bar Transport and costs: The item is delivered to avoid transport damage by freight carrier.

1.069,00 €*
Connection set 1 1/4 inch for WatPass IronGo, ManganGo and others
The connection set is suitable for the ironing machines WatPass IronGo and manganese removal systems such as WatPass ManganGo (3.3m³ / h and 4.4m³ / h) or just as it is needed. Delivery The connection set 1 1/4 inch contains: 2x armored hose DVGW 1 1/4" ÜM x 1 1/4 "ÜM, L = 1.000 mm; 1x drain hose, L = 2.000mm; 1x hose clamp 1/2"; 1x overflow hose; L = 2.000mm; 4x seals  

114,90 €*
Assembly block 1 inch IG x 1 inch AG with intersection, bypass function, sampling tap
The assembly block is suitable for the AquaAvanti IronGo iron filter and manganese filter AquaAvanti ManganGo or where a bypass is needed. If there is limited space at the point of connection, the use of a mounting block is ideal. For safety reasons, it may be desirable to be able to bridge the device unit. For such cases, the mounting block (bypass) is ideal. The installation of a mounting block usually takes about one hour. Your installer will surely make you an offer. If you are not sure if you need a mounting block just ask him. The mounting block is working that way Position 1 When the two outer taps are closed and the middle tap is open, the water flows past the connected device (eg AquaAvanti Iron GO or AquaAvanti ManganGo). Position 2 If the two outer cocks are open and the middle closed, all the water flows through the connected devices. Note: If it is necessary to bridge the units, simply return the mounting block to position 1.

98,00 €*
Connection set 1 inch for Aqua Avanti IronGo, ManganGo and others
The connection set is suitable for the disinfestation systems AquaAvanti IronGo (except EV-B1 and EW-B1) and equipment for manganese removal such as AquaAvanti ManganGo (except models with 3,3m³/h and 4,4m³/h flowrate) or just as it is needed. Delivery The connection set 1 inch contains: 2x armored hose DVGW 1 "ÜMxÜM, L-1.000mm, drain hose and overflow hose each 1.500mm, 1/2" hose clamp, 4 gaskets

94,90 €*