Assembly block 1 inch IG x 1 inch AG with intersection, bypass function, sampling tap

729,99 kr. *
Indhold: 1 Stykke

Priser inkl. momseksl. fragt

Klar til afsendelse idag
leverings tid ca. 1-3 hverdage

  • The assembly block is suitable for the AquaAvanti IronGo iron filter and manganese filter AquaAvanti ManganGo

    • 1555
    • 4250188802613
    The assembly block is suitable for the AquaAvanti IronGo   iron filter and manganese... mere
    Produktinformation "Assembly block 1 inch IG x 1 inch AG with intersection, bypass function, sampling tap"

    The assembly block is suitable for the AquaAvanti IronGo iron filter and manganese filter AquaAvanti ManganGo or where a bypass is needed.

    If there is limited space at the point of connection, the use of a mounting block is ideal. For safety reasons, it may be desirable to be able to bridge the device unit. For such cases, the mounting block (bypass) is ideal.

    The installation of a mounting block usually takes about one hour. Your installer will surely make you an offer. If you are not sure if you need a mounting block just ask him.


    The mounting block is working that way

    Position 1

    When the two outer taps are closed and the middle tap is open, the water flows past the connected device (eg AquaAvanti Iron GO or AquaAvanti ManganGo).

    Position 2

    If the two outer cocks are open and the middle closed, all the water flows through the connected devices.


    Note: If it is necessary to bridge the units, simply return the mounting block to position 1.

    Relaterede links til "Assembly block 1 inch IG x 1 inch AG with intersection, bypass function, sampling tap"
    Connections mounting block: inlet with internal thread 1 1/4 ", outlet with internal thread 1... mere
    Technical details "Assembly block 1 inch IG x 1 inch AG with intersection, bypass function, sampling tap"

    Connections mounting block: inlet with internal thread 1 1/4 ", outlet with internal thread 1 1/4"
    Softening system connections: inlet with internal thread 1 ", outlet with internal thread 1"
    Distance between softening system connections: 86 mm
    Length: 200 mm
    Max height: 176 mm
    Height H1: 134 mm
    Fine adjustment valve: yes
    Test valve: yes
    Operating pressure max. : 10 bar
    Operating temperature: 90 ° C
    Housing material: brass according to the Drinking Water Ordinance based on DIN 50930, Part 6
    Material blue handle: glass fiber reinforced plastic
    Seal material: EPDM seal according to the requirements of DVGW worksheet W270

    Læse, skrive og diskutere anmeldelser... mere
    Anmeldelser for "Assembly block 1 inch IG x 1 inch AG with intersection, bypass function, sampling tap"
    Skriv en anmeldelse
    Anmeldelser vil blive synlig efter verifikation.

    Felterne markeret med * er påkrævet.

    Jeg har læst og accepterer privatlivspolitikken.

    Set